Stable Balance Adjustment Structure of the Quadruped Robot Based on the Bionic Lateral Swing Posture

Aiming at the problem that the stability of the quadruped robot is decreased as its leg momentum is too high, a stable balance adjustment structure of the quadruped robot based on the bionic lateral swing posture is proposed. First, the leg structure of the quadruped robot is improved and designed by using the mechanism of the lateral swing posture of the leg of the hoof animal. Then, the D-H method is used to construct the corresponding leg kinematics model and determine the generalized coordinates of the leg joints in the lateral swing posture. The torque expression of the quadruped robot when it is tilted is established. Based on the differential equation of momentum of the hip joint and its static stability analysis, the static stability conditions in the upright posture and the bionic lateral swing posture are given. Finally, the experimental simulation and comparative analysis of the upright posture and the lateral swing posture of the quadruped robot are proposed by using the Adams virtual prototype technology. The simulation results show that as the angle of lateral swing increases, the peak value of the positive flip torque of the quadruped robot body increases accordingly, while the degree of tilt decreases accordingly, which shows that the bionic lateral swing posture of the quadruped robot has higher static stability than the traditional upright posture. This research provides a technical reference for the design and optimization of the offline continuous gait of the robot and the improvement of stability.

[1]  Zhang Hong,et al.  Parameter Identification and Control Algorithm of Electrohydraulic Servo System for Robotic Excavator Based on Improved Hammerstein Model , 2020 .

[2]  Chunsong Zhang,et al.  Trot Gait with Twisting Trunk of a Metamorphic Quadruped Robot , 2018 .

[3]  Jian Li,et al.  Hierarchically Planning Static Gait for Quadruped Robot Walking on Rough Terrain , 2019, J. Robotics.

[4]  Vahid Johari Majd,et al.  Dynamic-free robust adaptive intelligent fault-tolerant controller design with prescribed performance for stable motion of quadruped robots , 2019, Adapt. Behav..

[5]  Wei He,et al.  Reinforcement Learning Control of a Flexible Two-Link Manipulator: An Experimental Investigation , 2020, IEEE Transactions on Systems, Man, and Cybernetics: Systems.

[6]  Rajesh Elara Mohan,et al.  Rolling Locomotion Control of a Biologically Inspired Quadruped Robot Based on Energy Compensation , 2015, J. Robotics.

[7]  Feng Gao,et al.  Reaction forces identification of a quadruped robot with parallel-serial leg structure , 2015 .

[8]  Jianping Yuan,et al.  Online One-Step Parameter Identification Method for a Space Robot with Initial Momentum in Postcapture , 2020 .

[9]  Yousef Farid,et al.  Fractional-order active fault-tolerant force-position controller design for the legged robots using saturated actuator with unknown bias and gain degradation , 2018 .

[10]  Pushparaj Mani Pathak,et al.  Fault accommodation in compliant quadruped robot through a moving appendage mechanism , 2018 .

[11]  Hao Chen,et al.  Design and Control of a Novel Single Leg Structure of Electrically Driven Quadruped Robot , 2020 .

[12]  Long Bai,et al.  Kinematics, Dynamics, and Optimal Control of Pneumatic Hexapod Robot , 2017 .

[13]  Xinsheng Wang,et al.  Quadruped Robot Leg Optimization Based on a Multi-Objective Genetic Algorithm , 2018 .

[14]  Krzysztof Talaśka,et al.  Modelling and static stability analyses of the hexa-quad bimorph walking robot , 2019 .

[15]  Joonbum Bae,et al.  Inverse Kinematics Analysis and COG Trajectory Planning Algorithms for Stable Walking of a Quadruped Robot with Redundant DOFs , 2018 .

[16]  Ming Zhao,et al.  Application of Improved BQGA in Robot Kinematics Inverse Solution , 2019, J. Robotics.

[17]  Liu Zhi-zhong The Foot Workspace Analysis of Quadruped Bio-robot , 2011 .

[18]  Wei He,et al.  Admittance-Based Controller Design for Physical Human–Robot Interaction in the Constrained Task Space , 2020, IEEE Transactions on Automation Science and Engineering.