Current issues in recrystallization: a review

[1]  J. Christian,et al.  The theory of transformations in metals and alloys , 2003 .

[2]  L. A. Lalli,et al.  The hot deformation of aluminum alloys , 1998 .

[3]  A. Rollett,et al.  Abnormal grain growth -- The origin of recrystallization nuclei? , 1997 .

[4]  J. Jonas,et al.  Influence of Ferrite Rolling Temperature on Microstructure and Texture in Deformed Low C and IF Steels , 1997 .

[5]  R. Carpenter.  Atomic Structure and Chemistry of Boundaries/Interfaces , 1997, Microscopy and Microanalysis.

[6]  J. Dankovicová.  Czech , 1997, Journal of the International Phonetic Association.

[7]  A. Rollett,et al.  On the growth of abnormal grains , 1997 .

[8]  B. Cantor,et al.  Stability of microstructure in metallic systems: Contents , 1997 .

[9]  K. Vecchio,et al.  Recrystallization kinetics within adiabatic shear bands , 1997 .

[10]  John J. Jonas,et al.  Mathematical Modeling of Mean Flow Stress during the Hot Strip Rolling of Nb Steels , 1996 .

[11]  P. Čížek,et al.  The behaviour of incidental dislocation boundaries and geometrically necessary boundaries during warm tensile deformation of aluminium , 1996 .

[12]  H. Mcqueen,et al.  Flow softening and microstructural evolution of Al-5Mg during hot working , 1996 .

[13]  F. J. Humphreys,et al.  The deformation and recrystallization of particle-containing {011}〈100〉 aluminium crystals , 1996 .

[14]  T. Mcnelley,et al.  An investigation by interactive electron backscatter pattern analysis of processing and superplasticity in an aluminum-magnesium alloy , 1996 .

[15]  F. J. Humphreys,et al.  Grain boundary migration and Zener pinning in particle-containing copper crystals , 1996 .

[16]  Y. Yoshitomi,et al.  In-situ observation of grain-boundary migration in Fe-3wt%Si bicrystals by synchrotron X-radiation topography , 1996 .

[17]  U. Czubayko,et al.  The Motion of High Angle Grain Boundaries in Al and Al-Alloys , 1996 .

[18]  W. Blum,et al.  Dynamics of Recovery and Recrystallization , 1996 .

[19]  W. Blum,et al.  Deformation Kinetics and Microstructure during Hot Torsion of Al99.9, Al-11Zn, Al-1Mn, Al-5Mg, Al-5Mg-0.6Mn, Al-5Mg-0.6Mn-1Fe , 1996 .

[20]  F. Montheillet,et al.  Recrystallization during Hot Deformation of Aluminium , 1996 .

[21]  O. Daaland,et al.  Recrystallization texture development in commercial AlMnMg alloys , 1996 .

[22]  F. J. Humphreys,et al.  Discontinuous subgrain growth in deformed and annealed {110} 〈001〉 aluminium single crystals , 1996 .

[23]  B. Adams.  Orientation Imaging Microscopy: Bridging the Grain-Boundary Structure-Properties Linkage in Polycrystalline Materials , 1996 .

[24]  R. Becker,et al.  Direct observation of orientation change by channel die compression of polycrystalline aluminum—Use of a split sample , 1996 .

[25]  H. Nakashima,et al.  Grain boundary migration and it's mechanism of Fe-3wt%Si solid solution bicrystals , 1996 .

[26]  U. Czubayko,et al.  In-Situ Observations of Grain Boundary Migration , 1996 .

[27]  U. Czubayko,et al.  High Pressure Effects on Grain Boundary Migration and Mechanism of Grain Boundary Migration , 1996 .

[28]  U. Czubayko,et al.  Investigation of Grain Boundary Migration in Al-Bicrystals by Continuous Tracking with X-Rays , 1996 .

[29]  D. Molodov,et al.  The Mechanism of Grain Boundary Migration in Aluminum Bicrystals , 1996 .

[30]  K. Merkle.  High-resolution electron microscopy of grain boundaries , 1995 .

[31]  U. Czubayko,et al.  Acceleration of grain boundary motion in Al by small additions of Ga , 1995 .

[32]  D. J. Jensen,et al.  Growth rates and misorientation relationships between growing nuclei/grains and the surrounding deformed matrix during recrystallization , 1995 .

[33]  Q. Liu,et al.  Dislocation boundaries and active slip systems , 1995 .

[34]  H. Mcqueen,et al.  Hot working characteristics of steels in austenitic state , 1995 .

[35]  F. J. Humphreys,et al.  Recrystallization and Related Annealing Phenomena , 1995 .

[36]  H. Mcqueen,et al.  Superplasticity and grain boundary character distribution in overaged Al-Li-Cu-Mg-Zr alloy , 1995 .

[37]  A. Rollett,et al.  The development of cube and non-cube recrystallization textures , 1995 .

[38]  M. E. Kassner,et al.  Energy dissipation efficiency in aluminum dependent on monotonic flow curves and dynamic recovery , 1995 .

[39]  R. Becker.  A material size scale through crystal boundary energy , 1995 .

[40]  H. Mcqueen,et al.  Formation and Application of Grain Boundary Serrations , 1995 .

[41]  R. Becker,et al.  Effects of grain interactions on deformation and local texture in polycrystals , 1995 .

[42]  G. Palumbo,et al.  Solute Effects in Grain Boundary Engineering , 1995 .

[43]  E. Evangelista,et al.  Serrated grain boundaries in hot-worked aluminum alloys at high strains , 1995 .

[44]  N. Hansen,et al.  Mosaic dislocation structures in aluminium crystals deformed in multiple slip at 0.5 to 0.8TM , 1995 .

[45]  Q. Liu,et al.  Deformation microstructure and orientation of f.c.c. crystals , 1995 .

[46]  H. Mcqueen,et al.  Subgrain distributions in aluminium deformed under hot working conditions , 1995 .

[47]  Dong Nyung Lee.  The evolution of recrystallization textures from deformation textures , 1995 .

[48]  P. Čížek,et al.  A crystallographic study of dislocation cell arrangement in aluminium deformed at an elevated temperature , 1995 .

[49]  Y. Yoshitomi,et al.  Grain boundary segregation in 〈110〉 symmetrical tilt bicrystals of an Fe-3%Si alloy , 1995 .

[50]  C. Herzig,et al.  Temperature dependence and anisotropy of grain boundary self-diffusion along Σ = 5 〈001〉 tilt boundaries in Ag , 1995 .

[51]  U. Czubayko,et al.  Mobility of 〈111〉 tilt grain boundaries in the vicinity of the special misorientation ∑=7 in bicrystals of pure aluminium , 1995 .

[52]  J. Jonas,et al.  Transformation Textures in Steels , 1994 .

[53]  M. E. Kassner,et al.  Restoration mechanisms in large-strain deformation of high purity aluminum at ambient temperature , 1994 .

[54]  M. Buckett,et al.  Determination of grain boundary volume expansion by HREM , 1994 .

[55]  F. Flores,et al.  Interfaces in crystalline materials , 1994, Thin Film Physics and Applications.

[56]  D. Molodov,et al.  Effect of pressure on grain boundary migration in aluminium bicrystals , 1994 .

[57]  G. Palumbo,et al.  Application of grain boundary engineering concepts to alleviate intergranular cracking in Alloys 600 and 690 , 1994 .

[58]  M. E. Kassner,et al.  Restoration mechanisms in large-strain deformation of high purity aluminum at ambient temperature and the determination of the existence of “steady-state” , 1994 .

[59]  J. Jonas.  Dynamic recrystallization—scientific curiosity or industrial tool? , 1994 .

[60]  Toshiaki Urabe,et al.  Modeling Texture Change during the Recrystallization of an IF Steel , 1994 .

[61]  O. Daaland,et al.  On the Formation of Cube Texture in Aluminium , 1994 .

[62]  D. Juul Jensen,et al.  Modeling Microstructural Evolution of Multiple Texture Components during Recrystallization , 1994 .

[63]  W. Hutchinson.  Practical Aspects of Texture Control in Low Carbon Steels , 1994 .

[64]  O. Engler,et al.  The Effect of Precipitates on Texture Development , 1994 .

[65]  A. Rollett,et al.  Cube Texture Generation Dependence on Deformation Textures in Cold Rolled OFE Copper , 1994 .

[66]  R. Faulkner,et al.  Grain boundary misorientation changes during grain growth in pure aluminium , 1994 .

[67]  H. Mcqueen,et al.  The workability of commercial and experimental 0.6 pct carbon low alloy steels in the temperature range of 650 °C to 870 °C , 1994 .

[68]  G. Palumbo,et al.  Interface control for resistance to intergranular cracking , 1994 .

[69]  F. J. Humphreys,et al.  The annealing behaviour of deformed particle-containing aluminium single crystals , 1994 .

[70]  H. Yamagata.  In situ observation of dynamic recrystallization in five-nine aluminum by a transmission Laue method , 1994 .

[71]  Chun‐Sing Lee,et al.  Deformation banding and copper-type rolling textures , 1993 .

[72]  Chun‐Sing Lee,et al.  A theory of deformation banding in cold rolling , 1993 .

[73]  Tadao Watanabe.  Grain boundary design and control for high temperature materials , 1993 .

[74]  J. Schmidt,et al.  Investigation of the recrystallization of low temperature deformed highly pure types of aluminium , 1993 .

[75]  Chun‐Sing Lee,et al.  On the origin of cube texture in copper , 1993 .

[76]  M. E. Kassner,et al.  Dynamic grain growth a restoration mechanism in 99.999 Al , 1993 .

[77]  K. Kunze,et al.  Orientation imaging: The emergence of a new microscopy , 1993 .

[78]  H. J. McQueen,et al.  Metal forming: Industrial, mechanical computational and microstructural , 1993 .

[79]  N. Lassen,et al.  Automatic Local Texture Measurements by EBSP , 1993 .

[80]  H. Bunge,et al.  Model calculations of primary recrystallization textures , 1992 .

[81]  P. Haasen,et al.  Overview of the conference set on “fundamentals of recrystallizaton” , 1992 .

[82]  G. Gottstein,et al.  On the orientation dependence of grain boundary migration , 1992 .

[83]  D. Juul Jensen,et al.  Modelling of microstructure development during recrystallization , 1992 .

[84]  F. J. Humphreys.  A network model for recovery and recrystallisation , 1992 .

[85]  F. Haessner,et al.  Some microstructural aspects of the initial stage of recrystallization of highly rolled pure copper , 1992 .

[86]  Tadao Watanabe.  The importance of grain boundary character distribution (GBCD) to recrystallization, grain growth and texture , 1992 .

[87]  Anthony D. Rollett,et al.  Computer simulation of recrystallization—III. Influence of a dispersion of fine particles , 1992 .

[88]  H. Yamagata,et al.  Microstructural evolution of single-crystalline aluminum during multipeak stress oscillation at 623 K , 1992 .

[89]  J. Jonas,et al.  Modelling the texture changes produced by dynamic recrystallization , 1992 .

[90]  H. Weiland.  The determination of long-range misorientations in the microstructure of materials , 1992 .

[91]  C. Thompson,et al.  Simulation of thin film grain structures—II. Abnormal grain growth , 1992 .

[92]  M. E. Kassner,et al.  Dynamic restoration mechanisms in Al-5.8 At. Pct Mg deformed to large strains in the solute drag regime , 1992 .

[93]  D. Kuhlmann-wilsdorf,et al.  Overview no. 96: Evolution of F.C.C. deformation structures in polyslip , 1992 .

[94]  T. Watanabe.  Grain Boundary Character Distribution (GBCD) Analysis of Grain Growth-Related Phenomena in Polycrystalline Materials , 1992 .

[95]  F. Schwarzer,et al.  On the Orientation Dependence of Grain Boundary Energy and Mobility , 1992 .

[96]  G. Was,et al.  Grain boundary character distributions in Ni-16Cr-9Fe using selected area channeling patterns: methodology and results. , 1991, Journal of electron microscopy technique.

[97]  H. W. Hesselbarth,et al.  Simulation of recrystallization by cellular automata , 1991 .

[98]  H. Mcqueen,et al.  Comparison of static softening in 300 series stainless steels under iso- and anisothermal conditions , 1991 .

[99]  P. J. King,et al.  Grain boundary design and control for intergranular stress-corrosion resistance , 1991 .

[100]  E. Nes,et al.  On the origin of recrystallization textures in aluminium , 1991 .

[101]  D. Kuhlmann-wilsdorf,et al.  Geometrically necessary, incidental and subgrain boundaries , 1991 .

[102]  T. Mcnelley,et al.  Recrystallization and superplasticity at 300 °C in an aluminum-magnesium alloy , 1991 .

[103]  H. Mcqueen,et al.  Bar Mill Torsional Simulation of 304 Stainless Steel , 1991 .

[104]  J. Szpunar,et al.  A Monte-Carlo simulation applied to the modelling of nucleation of texture , 1991 .

[105]  M. E. Kassner,et al.  The effects of temperature and strain rate on extended ductility of aluminum , 1991 .

[106]  L. Lim,et al.  Fracture toughness and brittle-ductile transition controlled by grain boundary character distribution (GBCD) in polycrystals , 1990 .

[107]  G. Palumbo,et al.  Structure-dependence of intergranular corrosion in high purity nickel , 1990 .

[108]  O. Engler,et al.  Effects of particles on development of microstructure and texture during rolling and recrystallisation in fcc alloys , 1990 .

[109]  D. Wolf,et al.  Structure and Energy of Grain Boundaries in Metals , 1990 .

[110]  H. Mcqueen,et al.  Comparison of dynamic softening in 301, 304, 316 and 317 stainless steels , 1990 .

[111]  H. Grimmer,et al.  Discussion of the representation of intercrystalline misorientation in cubic materials , 1990 .

[112]  古林 英一.  Recrystallization'90 報告 , 1990 .

[113]  M. E. Kassner.  Large-strain deformation of aluminum single crystals at elevated temperature as a test of the geometric-dynamic-recrystallization concept , 1989 .

[114]  H. Mcqueen,et al.  Influence of ultra-high strains at elevated temperatures on the microstructure of aluminium. Part I , 1989 .

[115]  H. Mcqueen,et al.  Evolution of flow stress in aluminium during ultra-high straining at elevated temperatures. Part II , 1989 .

[116]  B. Predel,et al.  Surface and grain boundary segregation in NiIn studied under identical conditions with AES , 1989 .

[117]  D. Wolf.  Correlation between the energy and structure of grain boundaries in b.c.c. metals I. Symmetrical boundaries on the (110) and (100) planes , 1989 .

[118]  W. Hutchinson,et al.  Recrystallisation textures in iron resulting from nucleation at grain boundaries , 1989 .

[119]  M. E. Kassner,et al.  Large-strain torsional deformation in aluminum at elevated temperatures , 1989 .

[120]  C. Bauer,et al.  “In situ” determination of grain boundary migration rates by synchrotron white beam X‐ray topography , 1988 .

[121]  E. Evangelista,et al.  Substructures in aluminium from dynamic and static recovery , 1988 .

[122]  B. Wilshire,et al.  Creep and fracture of engineering materials and structures : proceedings of the Third International Conference held at University College, Swansea, 5th-10th April, 1987 , 1981 .

[123]  Tadahisa Nakamura,et al.  Factors affecting dynamic recrystallization of metals and alloys , 1987 .

[124]  M. E. Kassner,et al.  The dislocation microstructure of aluminum , 1987, Metallurgical and Materials Transactions A.

[125]  D. Caillard,et al.  New trends in creep microstructural models for pure metals , 1987 .

[126]  C. Thompson,et al.  The effect of nucleation conditions on the topology and geometry of two-dimensional grain structures , 1987 .

[127]  David J. Srolovitz,et al.  Computer simulation of recrystallization-I. Homogeneous nucleation and growth , 1986 .

[128]  H. J. McQueen,et al.  Dynamic recovery and strain hardening in the hot deformation of type 317 stainless steel , 1986 .

[129]  K. Lücke,et al.  A theory of texture controlled grain growth—I. Derivation and general discussion of the model , 1986 .

[130]  L. Shvindlerman,et al.  Computer simulation of grain growth in two dimensions , 1985 .

[131]  B. Straumal,et al.  Regions of existence of special and non-special grain boundaries , 1985 .

[132]  R. Doherty.  Nucleation and growth kinetics of different recrystallization texture components , 1985 .

[133]  R. Doherty,et al.  Kinetics of sub-grain coalescence—A reconsideration of the theory , 1984 .

[134]  J. Driver,et al.  A theoretical and experimental study of the plastic deformation of f.c.c. crystals in plane strain compression , 1984 .

[135]  E. Evangelista,et al.  Hot deformation and dynamic recrystallization of Al-5Mg-0.8Mn alloy , 1984 .

[136]  J. S. Kallend,et al.  Orientation dependence of stored energy of cold work in 50% cold rolled copper , 1984 .

[137]  H. J. Mcqueen,et al.  Recent advances in hot working: Fundamental dynamic softening mechanisms , 1984 .

[138]  P. S. Sahni,et al.  Computer simulation of grain growth—I. Kinetics , 1984 .

[139]  D. Molodov,et al.  The effect of pressure on migration of 〈001〉 tilt grain boundaries in tin bicrystals , 1984 .

[140]  F. J. Humphreys,et al.  The recrystallisation of aluminium-silicon alloys containing a bimodal particle distribution , 1984 .

[141]  John J. Jonas,et al.  Overview no. 35 Dynamic recrystallization: Mechanical and microstructural considerations , 1984 .

[142]  P. Haasen,et al.  Development of the recrystallization texture in tensile deformed aluminium single crystals—I. HVEM observations , 1983 .

[143]  W. Hutchinson,et al.  Recrystallisation mechanisms and the origin of cube texture in copper , 1982 .

[144]  D. Caillard,et al.  Microstructure of aluminium during creep at intermediate temperature—II. In situ study of subboundary properties , 1982 .

[145]  O. Sherby,et al.  The influence of substructure on the elevated and room temperature strength of a 26 Cr-1 Mo ferritic stainless steel , 1982 .

[146]  C. Rossard,et al.  Étude des mécanismes de déformation et d’adoucissement dynamique des aciers ferritiques Fe-Cr au cours de la déformation à chaud , 1981 .

[147]  H. Fukutomi,et al.  STRESS INDUCED MIGRATION OF SYMMETRIC TILT BOUNDARIES IN ALUMINUM. , 1981 .

[148]  M. Guégan,et al.  Mesure en continu des dimensions de ronds laminés à chaud , 1981 .

[149]  K. Bachmann,et al.  The generation of lattice dislocations by migrating boundaries , 1980 .

[150]  K. Mahin,et al.  Comparative analysis of the cellular and Johnson-Mehl microstructures through computer simulation , 1980 .

[151]  Herbert Herman,et al.  Treatise on Materials Science and Technology , 1979 .

[152]  N. Hansen,et al.  Subgrain coalescence and the nucleation of recrystallization at grain boundaries in aluminium , 1979, Proceedings of the Royal Society of London. A. Mathematical and Physical Sciences.

[153]  U. F. Kocks,et al.  Thermal recovery processes in deformed aluminum , 1979 .

[154]  J. W. Edington,et al.  Textures in a superplastic Al-6Cu-0.3Zr alloy , 1979 .

[155]  R. Doherty,et al.  Nucleation of recrystallization in compressed aluminium: studies by electron microscopy and Kikuchi diffraction , 1979 .

[156]  P. D. Southwick,et al.  The lattice-imaging technique for a duplex stainless steel , 1979 .

[157]  J. Jonas,et al.  Effect of precipitation on recrystallization in microalloyed steels , 1979 .

[158]  E. Nes.  Strain-induced continuous recrystallization in Zr-bearing aluminium alloys , 1978 .

[159]  M. Myshlyaev,et al.  Superplasticity in Al single crystals , 1978 .

[160]  Tadao Watanabe,et al.  Misorientation dependence of grain boundary segregation , 1978 .

[161]  C. M. Sellars.  Recrystallization of metals during hot deformation , 1978, Philosophical Transactions of the Royal Society of London. Series A, Mathematical and Physical Sciences.

[162]  L. Shvindlerman,et al.  Kinetic Properties of <111> Tilt Boundaries in Aluminium , 1978, January 16.

[163]  J. Dutkiewicz.  Electron microscope study of the effect of deformation on precipitation and recrystallization in copper-titanium alloys , 1977 .

[164]  R. Doherty,et al.  The structure of deformed aluminium and its recrystallization—investigations with transmission Kossel diffraction , 1977 .

[165]  D. Warrington.  Grain boundary structure and properties , 1976 .

[166]  D. P. Woodruff,et al.  Anisotropy in grain boundary segregation in copper-bismuth alloys , 1976 .

[167]  E. W. Hart,et al.  Anelastic deformation of high purity aluminum at room temperature , 1976 .

[168]  H. Grimmer,et al.  Coincidence-site lattices and complete pattern-shift in cubic crystals , 1974 .

[169]  C. Bauer,et al.  Kinetics of grain boundary migration in copper bicrystals with [001] rotation axes☆ , 1973 .

[170]  Y. Ishida,et al.  Burgers vectors of boundary dislocations in ordered grain boundaries of cubic metals , 1973 .

[171]  G. Glover,et al.  Recovery and recrystallization during high temperature deformation of α-iron , 1973 .

[172]  R. C. Sun,et al.  Tilt boundary migration in NaCl bicrystals , 1970 .

[173]  U. Köster,et al.  Recrystallisation mechanism and annealing texture in aluminium-copper alloys , 1969 .

[174]  C. M. Sellars,et al.  Dynamic recrystallization in nickel and nickel-iron alloys during high temperature deformation , 1969 .

[175]  K. Lücke,et al.  Orientierungszusammenhänge bei der Rekristallisation von Einkristallen einer Eisen-Silizium-Legierung mit 3% Si , 1968 .

[176]  H. Schwarz,et al.  Investigation of preferred orientation on zinc by galvanomagnetic effects , 1967 .

[177]  W. A. Wong,et al.  DEFORMATION OF ALUMINIUM AT HIGH TEMPERATURES AND STRAIN RATES , 1967 .

[178]  F. E. White,et al.  Quelques observations sur la rupture par torsion a chaud d’alliages austénitiques et ferritiques , 1966 .

[179]  D. Brandon,et al.  The structure of high-angle grain boundaries , 1966 .

[180]  William D. Nix,et al.  A model for steady state creep based on the motion of jogged screw dislocations , 1965 .

[181]  J. Rutter,et al.  Migration of 〈100〉 tilt grain boundaries in high purity lead , 1965 .

[182]  J. Mackenzie,et al.  SECOND PAPER ON STATISTICS ASSOCIATED WITH THE RANDOM DISORIENTATION OF CUBES , 1958 .

[183]  R. Cahn,et al.  Textures in extruded aluminium , 1953 .

[184]  W. Read,et al.  Dislocation Models of Crystal Grain Boundaries , 1950 .

[185]  Hsun Hu,et al.  The Orientation Dependence of the Rate of Grain Boundary Migration , 1950 .

[186]  P. Beck,et al.  Strain Induced Grain Boundary Migration in High Purity Aluminum , 1950 .

[187]  Sir Robert Honeycombe,et al.  12 – Stainless Steel , 2006 .

[188]  K. Pearson,et al.  Biometrika , 1902, The American Naturalist.

[189]  A. Götte,et al.  Metall , 1897 .

[190]  van der Erik Giessen,et al.  SIMULATION OF MATERIALS PROCESSING: THEORY, METHODS AND APPLICATIONS , 1998 .

[191]  V. Novikov.  Grain growth and control of microstructure and texture in polycrystalline materials , 1997 .

[192]  J. Jonas,et al.  Modeling texture change during the static recrystallization of interstitial free steels , 1996 .

[193]  W. Blum,et al.  Geometric dynamic recrystallization in hot torsion of Al5Mg0.6Mn (AA5083) , 1996 .

[194]  U. F. Kocks,et al.  Development of localized orientation gradients in fcc polycrystals , 1996 .

[195]  N. Hansen.  Microstructural and crystallographic aspects of recrystallization : proceedings of the 16th Risø International Symposium on Materials Science, 4-8 September 1995 , 1995 .

[196]  H. Mcqueen,et al.  Relationship of energy dissipation efficiency to microstructural evolution in hot working of AISI 304 steel , 1995 .

[197]  Long-Qing Chen,et al.  A novel computer simulation technique for modeling grain growth , 1995 .

[198]  J. W. Shaner,et al.  High-pressure science and technology--1993 , 1994 .

[199]  J. Jonas,et al.  Advances in hot deformation textures and microstructures : proceedings of a symposium sponsored by TMS and ASM International held during Materials Week in Pittsburgh, PA, October 18-20, 1993 , 1994 .

[200]  J. Jonas,et al.  Modelling the effect of deformation-induced vacancies on segregation and precipitation , 1994 .

[201]  Valerie Randle,et al.  The measurement of grain boundary geometry , 1993 .

[202]  H. Mcqueen,et al.  Hot strength and microstructural evolution of 316 stainless steel during simulated multistage deformation by torsion , 1993 .

[203]  Tadao Watanabe.  Grain Boundary Design and Grain Boundary Character Distribution (GBCD)in Texture Polycrystalline Materials , 1991 .

[204]  E. Holm,et al.  Effects of particle size on inhibited grain growth , 1990 .

[205]  S. Hofmann.  Surface analysis techniques in the study of segregation phenomena , 1990 .

[206]  N. Hansen,et al.  Annealing Processes - Recovery, Recrystallization and Grain Growth: Proceedings of the 7. Risø International Symposium on Metallurgy and Materials Science, Risø, 8-12 September 1986 , 1986 .

[207]  J. Jonas,et al.  Strength of metals and alloys , 1985 .

[208]  H. Mcqueen,et al.  Microstructural evolution in Al deformed to strains of 60 at 400°C , 1985 .

[209]  F. J. Humphreys.  Inhomogeneous Deformation of Some Aluminium Alloys at Elevated Temperature , 1982 .

[210]  John J. Jonas,et al.  The Use of Torsion Testing to Assess Material Formability , 1982 .

[211]  E. Brown,et al.  On the origin of equiaxed austenite grains that result from the hot rolling of steel , 1981 .

[212]  P. Van Houtte,et al.  Large strain work hardening and textures , 1980 .

[213]  K. Lücke,et al.  Recrystallization Textures of Silver, Copper and α-Brasses With Different Zinc-Contents as a Function of the Rolling Temperature , 1979 .

[214]  F. Haessner.  Recrystallization of metallic materials , 1978 .

[215]  R. Cahn,et al.  Materials science and engineering , 2023, Nature.

[216]  A. Plumtree,et al.  Microstructural misorientations in extruded aluminium , 1977 .

[217]  J. W. Martin,et al.  Stability of microstructure in metallic systems , 1976 .

[218]  J. Jonas,et al.  Recovery and Recrystallization during High Temperature Deformation , 1975 .

[219]  K. Lücke.  The orientation dependence of grain boundary motion and the formation of recrystallization textures , 1974 .

[220]  R. Doherty.  The Deformed State and Nucleation of Recrystallization , 1974 .

[221]  W. Hutchinson.  Development of Textures in Recrystallization , 1974 .

[222]  I. Dillamore,et al.  The Mechanisms of Recrystallization in Cubic Metals with Particular Reference to Their Orientation-Dependence , 1974 .

[223]  M. Hatherly,et al.  Oriented Nucleation in Low-Carbon Steels , 1974 .

[224]  B. Chalmers,et al.  High-angle grain boundaries , 1972 .

[225]  F. Haessner,et al.  Topographic Arrangement of Crystallite Orientations in Rolled Copper , 1972 .

[226]  H. J. McQueen,et al.  Dynamic Recrystallization of Copper during Hot Torsion , 1972 .

[227]  G. V. Chester,et al.  Solid State Physics , 2000 .

[228]  David Turnbull,et al.  Rate of Nucleation in Condensed Systems , 1949 .

[229]  F. Segal,et al.  A CHARACTERIZATION OF FIBRANT SEGAL CATEGORIES , 2006, math/0603400.