Improvement of electro-mechanical properties of strain sensors made of elastic-conductive hybrid yarns

Fabric-based strain sensors have been developed using different technologies, among which flat knitting is one of the most effective and economical methods. However, knitted strain sensors are not often used in practical applications because the sensors usually exhibit large elastic hysteresis when they are deformed and subjected to stress during application. One possible approach to overcome these shortcomings is to introduce elastic properties at the yarn level by combining the conductive materials with elastic materials. In this paper, we demostrate a hybrid yarn made of a conductive yarn that winds around an elastic core yarn in a direct twisting device. The electro-mechanical properties of strain sensors knitted from the hybrid yarns were tested in order to characterize the sensors. This study consisted of two stages: the yarn preparation and the sensor characterization. In the first stage, two kinds of elastic core components (polyamide/Lycra and polyamide) and two kinds of conductive winding yarns (Bekinox BK50/1 and Bekinox BK50/2) were selected for twisting. The twisting was done with a constant twisting speed and four different numbers of twists. Mechanical properties, that is, the tenacity, force at break and elongation at break, were tested in order to determine the optimal parameters for producing the hybrid yarns. The results indicated that among the tested yarns those with a polyamide core and Bekinox BK50/1 winding yarns at 450 twist/meter and with a polyamide/Lycra core and Bekinox BK 50/2 winding yarns at 600 twist/meter had the best properties. These were thus selected as the materials for producing knitted strain sensors. In the second stage, electro-mechanical properties of the knitted strain sensors were determined under tensile stress and multi-cyclic tensile stress. The results show that the hybrid yarns can effectively enhance the electro-mechanical properties of the knitted strain sensors without compromising processiablity and comfortability.

[1]  Rita Paradiso,et al.  A wearable health care system based on knitted integrated sensors , 2005, IEEE Transactions on Information Technology in Biomedicine.

[2]  Hyun-Seung Cho,et al.  Textile electrodes of jacquard woven fabrics for biosignal measurement , 2010 .

[3]  A. Isayev,et al.  Rheology: Concepts, Methods and Applications , 2005 .

[4]  Marcus Karlsson,et al.  Adaptive spatio-temporal filtering of disturbed ECGs: a multi-channel approach to heartbeat detection in smart clothing , 2007, Medical & Biological Engineering & Computing.

[5]  H. Mattila,et al.  'Disappearing Sensor'-Textile Based Sensor for Monitoring Breathing , 2011, 2011 International Conference on Control, Automation and Systems Engineering (CASE).

[6]  C Hertleer,et al.  Electrical circuit model of elastic and conductive yarns produced by hollow spindle spinning , 2011 .

[7]  X. Tao,et al.  Conductive knitted fabric as large-strain gauge under high temperature , 2006 .

[8]  D. De Rossi,et al.  Wearable sensorized system for analyzing the lower limb movement during rowing activity , 2007, 2007 IEEE International Symposium on Industrial Electronics.

[9]  G. Tröster,et al.  Sensor for Measuring Strain in Textile , 2008, Sensors.

[10]  Ching-Wen Yang,et al.  Textile-based monitoring system for biker , 2009, 2009 9th International Conference on Information Technology and Applications in Biomedicine.

[11]  Danilo De Rossi,et al.  Electroactive polymer-based devices for e-textiles in biomedicine , 2005, IEEE Trans. Inf. Technol. Biomed..

[12]  N. Noury,et al.  A smart cloth for ambulatory telemonitoring of physiological parameters and activity: the VTAMN project , 2004, Proceedings. 6th International Workshop on Enterprise Networking and Computing in Healthcare Industry - Healthcom 2004 (IEEE Cat. No.04EX842).

[13]  Li Guo,et al.  Textile Strain Sensors Characterization- Sensitivity, Linearity, Stability and Hysteresis , 2010 .

[14]  B. Hermans,et al.  Integrating wireless ECG monitoring in textiles , 2005, The 13th International Conference on Solid-State Sensors, Actuators and Microsystems, 2005. Digest of Technical Papers. TRANSDUCERS '05..

[15]  Joel Peterson,et al.  Knitted Wearable Stretch Sensor for Breathing Monitoring Application , 2011 .

[16]  I. Kazani,et al.  Comparative study on the mechanical properties of elastic, electro-conductive hybrid yarns and their input materials , 2011 .

[17]  Keri J. Heilman,et al.  Accuracy of the LifeShirt® (Vivometrics) in the detection of cardiac rhythms , 2007, Biological Psychology.

[18]  Tariq Bashir,et al.  Surface modification of conductive PEDOT coated textile yarns with silicone resin , 2011 .

[19]  N. Taccini,et al.  Wearable monitoring system for chronic cardio-respiratory diseases , 2008, 2008 30th Annual International Conference of the IEEE Engineering in Medicine and Biology Society.

[20]  Danilo De Rossi,et al.  Electroactive polymer-based devices for e-textiles in biomedicine , 2005, IEEE Transactions on Information Technology in Biomedicine.

[21]  I. Kazani,et al.  Electro-conductive and elastic hybrid yarns – The effects of stretching, cyclic straining and washing on their electro-conductive properties , 2011 .