A multi-phase model for predicting the effective diffusion coefficient of chlorides in concrete

Abstract In this paper, a mesoscopic structure model is proposed and is used to investigate the chloride diffusion behaviour in concrete. The concrete is treated as a heterogeneous material composed of cement paste and aggregate two phases. The chloride diffusion is assumed to take place only in the cement paste phase. By modelling concretes with different aggregate volume fractions the effect of aggregate content on chloride diffusion in concrete is examined. The results show that the effective diffusion coefficients obtained from the two- and three-dimensional models are different. The two-dimensional series and parallel models provide upper and lower bounds of the effective diffusion coefficient, respectively, whereas the three-dimensional model provides the accurate effective diffusion coefficient. The three-dimensional simulation also demonstrates that the Maxwell model is able to predict accurate effective diffusion coefficient of chlorides in concrete.

[1]  D. A. G. Bruggeman.  Berechnung verschiedener physikalischer Konstanten von heterogenen Substanzen. I. Dielektrizitätskonstanten und Leitfähigkeiten der Mischkörper aus isotropen Substanzen , 1935 .

[2]  Yanwei Zeng,et al.  Modeling of chloride diffusion in hetero-structured concretes by finite element method , 2007 .

[3]  S. Caré.  Influence of aggregates on chloride diffusion coefficient into mortar , 2003 .

[4]  E. Hervé,et al.  Application of a n-Phase Model to the Diffusion Coefficient of Chloride in Mortar , 2004 .

[5]  Multiscale Structures to Describe Porous Media Part II: Transport Properties and Application to Test Materials , 1997 .

[6]  Edward J. Garboczi,et al.  Multi-Scale Microstructural Modeling of Concrete Diffusivity: Identification of Significant Varibles , 1998 .

[7]  C. Q. Li,et al.  Aggregate distribution in concrete with wall effect , 2003 .

[8]  D. W. Hobbs,et al.  Aggregate influence on chloride ion diffusion into concrete , 1999 .

[9]  G Shakhmenko,et al.  CONCRETE MIX DESIGN AND OPTIMIZATION , 1998 .

[10]  Edward J. Garboczi,et al.  Permeability, diffusivity, and microstructural parameters: A critical review , 1990 .

[11]  Arthur Newell Talbot,et al.  THE STRENGTH OF CONCRETE - ITS RELATION TO THE CEMENT, AGGREGATES AND WATER , 1923 .

[12]  Xinzhu Zhou,et al.  Three-Phase Composite Sphere Model for the Prediction of Chloride Diffusivity of Concrete , 2008 .

[13]  P. M. Heertjes,et al.  Analysis of diffusion in macroporous media in terms of a porosity, a tortuosity and a constrictivity factor , 1974 .

[14]  C. C. Yang.  On the relationship between pore structure and chloride diffusivity from accelerated chloride migration test in cement-based materials , 2006 .

[15]  C. C. Yang,et al.  Approximate migration coefficient of interfacial transition zone and the effect of aggregate content on the migration coefficient of mortar , 2002 .

[16]  A. K. Nickerson,et al.  The diffusion of ions through water-saturated cement , 1984 .

[17]  Hamid Rahmani,et al.  Effect of binary cement replacement materials on sulfuric acid resistance of dense concretes , 2008 .

[18]  L. Dormieux,et al.  Modélisation macroscopique du transport diffusif. Apport des méthodes de changement d'échelle d'espace , 2000 .

[19]  H. Moon,et al.  Relationship between average pore diameter and chloride diffusivity in various concretes , 2006 .

[20]  S. Cho,et al.  The relationship between pore structure and chloride diffusivity from ponding test in cement-based materials , 2006 .

[21]  Nick R. Buenfeld,et al.  Assessing the influence of ITZ on the steady-state chloride diffusivity of concrete using a numerical model , 2009 .

[22]  R. de Borst,et al.  Computational modelling of chloride ion transport in reinforced concrete , 2001 .