Ultrasonic probes for high temperature immersion measurements

Ultrasonic probes for high temperature measurements in immersion are presented. These probes consist of piezoelectric transducers and buffer rods, and may be operated in the pulse echo mode. The probes can operate to temperatures as high as 215 °C without requiring a cooling system. For imaging purposes, one end of the clad buffer rod is machined into a semi-spherical concave shape, of which the purpose is to focus the ultrasound. The operating frequency is between 5 and 9 MHz. Ultrasonic images, produced using a mechanical raster scan with the probes fully immersed in silicone oil at elevated temperatures, are presented. The importance of the signal-to-noise ratio in the pulse-echo measurement is discussed.

[1]  S. Palmer,et al.  Techniques for the generation of ultrasound for extended periods at high temperatures , 1979 .

[2]  L M Barrett,et al.  THE USE OF ULTRASONICS FOR VISUALISING COMPONENTS OF THE PROTOTYPE FAST REACTOR WHILST IMMERSED IN SODIUM , 1983 .

[3]  P. S. Nicholson,et al.  High frequency, high temperature ultrasonic transducers , 1990 .

[4]  I. Ihara,et al.  Ultrasonic imaging, particle detection, and V(z) measurements in molten zinc using focused clad buffer rods , 2000 .

[5]  W. E. Lawrie,et al.  Ultrasonic testing of materials: 2nd English Edition, translated from the 3rd German Edition, J. & H. Krautkrämer Springer-Verlag, Berlin, Heidelberg, New York (1977) 667 pp, $65.20, DM 148 , 1978 .

[6]  A. R. Selfridge,et al.  Approximate Material Properties in Isotropic Materials , 1985, IEEE Transactions on Sonics and Ultrasonics.

[7]  K. Raum,et al.  Pulse-echo field distribution measurement technique for high-frequency ultrasound sources , 1997, IEEE Transactions on Ultrasonics, Ferroelectrics and Frequency Control.

[8]  R. N. Thurston.  Elastic waves in rods and clad rods , 1978 .

[9]  Kazuo Muto,et al.  Applications of Brazed-Type Ultrasonic Probes for High and Low Temperature uses , 1992 .

[10]  C. Jen,et al.  Experimental evaluation of clad metallic buffer rods for high temperature ultrasonic measurements , 2000 .

[11]  J. R. Fothergill,et al.  Development of high-temperature ultrasonic transducers for under-sodium viewing applications , 1989 .

[12]  A. Safaai-Jazi,et al.  Leaky Modes in Weakly Guiding Fiber Acoustic Waveguides , 1986, IEEE Transactions on Ultrasonics, Ferroelectrics and Frequency Control.