Microstructure and bonding strength of WC reinforced Ni-base alloy brazed composite coating

[1]  Xiaolei Wu.  Microstructural characteristics of TiC-reinforced composite coating produced by laser syntheses , 1999 .

[2]  W. Chen,et al.  Microstructural characterization of WCp reinforced Ni–Cr–B–Si–C composite coatings , 1999 .

[3]  Yu Zhou,et al.  Microstructural characterisation of laser clad coating of nickel based alloy with dissolved SiCp , 1999 .

[4]  Z. Dawei,et al.  Laser cladding of Ni-Cr3C2/(Ni + Cr) composite coating , 1998 .

[5]  L. Lim,et al.  Laser cladding of nickel-based hardfacing alloys , 1998 .

[6]  J. Guilemany,et al.  Variation of friction coefficient with percentage of metallic matrix in WC-Co coatings sprayed by HVOF , 1998 .

[7]  D. Nolan,et al.  Microstructural stability of thermal shayed WC–Co composite coatings in oxidising atmospheres at 450°C , 1998 .

[8]  B. Wielage,et al.  Composite coatings: manufacture, properties, and applications , 1997 .

[9]  R. C. Gassmann,et al.  Laser cladding with (WC+W2C)/Co–Cr–C and (WC+W2C)/Ni–B–Si composites for enhanced abrasive wear resistance , 1996 .

[10]  Jyoti Mazumder,et al.  Non-equilibrium synthesis of Fe-Cr-C-W alloy by laser cladding , 1994, Journal of Materials Science.

[11]  A. Ramalho,et al.  Failure modes observed on worn surfaces of W-C-Co sputtered coatings , 1993 .

[12]  A. Karimi,et al.  Microstructure and hydroabrasive wear behaviour of high velocity oxy-fuel thermally sprayed WCCo(Cr) coatings , 1993 .

[13]  P. Bianchi,et al.  Laser deposition of carbide-reinforced coatings , 1991 .

[14]  N. Jayaraman,et al.  Characterisation and wear performance of plasma sprayed WC–Co coatings , 1989 .