Buckling of Graphene Platelet Reinforced Composite Cylindrical Shell with Cutout

This paper investigates the buckling behavior of graphene platelets (GPL) reinforced composite cylindrical shells with cutouts via finite element method (FEM) simulation. Young's modulus of the composites is determined by the modified Halpin-Tsai micromechanics model while the mass density and Poisson's ratio of the composites are approximated by the rule of mixture. Comprehensive parametric study is conducted to investigate the effects of the weight fraction and the shape of GPL fillers, the geometry of the shell and the position and orientation of the cutout on the buckling behaviors of the cylindrical structures. The results demonstrate that the addition of GPLs can significantly increase the load bearing capacity of the cylindrical shells. Larger sized GPLs with fewer single graphene layers are favorable reinforcing fillers in enhancing the buckling performances of the structures. The buckling load is sensitive to the location of the cutout with larger aspect ratio. Moreover, the orientation of the cutout is found to have significant effects on the buckling load when the orientation angle (Formula presented.) is falling within the ranges - (Formula presented.)/2 (Formula presented.) - (Formula presented.)/4 and (Formula presented.)/4 (Formula presented.)/2.

[1]  Jie Yang,et al.  Nonlinear free vibration of functionally graded polymer composite beams reinforced with graphene nanoplatelets (GPLs) , 2017 .

[2]  Richard Degenhardt,et al.  On the Use of Generalised Beam Theory to assessthe Buckling and Post-Buckling Behaviour ofLaminated CFRP Cylindrical Stiffened Panels , 2010 .

[3]  Jie Yang,et al.  Buckling and postbuckling of functionally graded multilayer graphene platelet-reinforced composite beams , 2017 .

[4]  O. Ifayefunmi,et al.  Buckling behavior of axially compressed cylindrical shells: Comparison of theoretical and experimental data , 2016 .

[5]  Sritawat Kitipornchai,et al.  Nonlinear bending of polymer nanocomposite beams reinforced with non-uniformly distributed graphene platelets (GPLs) , 2017 .

[6]  Yulin Yang,et al.  Mechanical properties of graphyne and its family – A molecular dynamics investigation , 2012 .

[7]  Sritawat Kitipornchai,et al.  Dynamic instability of functionally graded multilayer graphene nanocomposite beams in thermal environment , 2017 .

[8]  A. Miravete,et al.  Mechanical model to evaluate the effect of the dispersion in nanocomposites , 2007 .

[9]  M. Shariati,et al.  Experimental study of SS304L cylindrical shell with/without cutout under cyclic axial loading , 2012 .

[10]  K. Lee,et al.  Collapse of Sharp-Notched 6061-T6 Aluminum Alloy Tubes Under Cyclic Bending , 2016 .

[11]  Alan R. Champneys,et al.  Computation of localized post buckling in long axially compressed cylindrical shells , 1997, Philosophical Transactions of the Royal Society of London. Series A: Mathematical, Physical and Engineering Sciences.

[12]  Jie Yang,et al.  Free and forced vibrations of functionally graded polymer composite plates reinforced with graphene nanoplatelets , 2017 .

[13]  A. Haque,et al.  Molecular modeling of crosslinked graphene–epoxy nanocomposites for characterization of elastic constants and interfacial properties , 2013 .

[14]  Lin Seng Ong,et al.  BUCKLING OF A THIN-WALLED CYLINDRICAL SHELL WITH FOAM CORE UNDER AXIAL COMPRESSION , 2011 .

[15]  Azam Tafreshi,et al.  Buckling and post-buckling analysis of composite cylindrical shells with cutouts subjected to internal pressure and axial compression loads , 2002 .

[16]  D. Dinkler,et al.  EVALUATION OF THE PERTURBATION SENSITIVITY OF COMPOSITE LAMINATED SHELLS , 2010 .

[17]  Farid Taheri,et al.  Numerical and experimental investigations of the response of aluminum cylinders with a cutout subject to axial compression , 2006 .

[18]  Jianjie Cheng,et al.  Analytical research on dynamic buckling of thin cylindrical shells with thickness variation under axial pressure , 2016 .

[19]  S. Stankovich,et al.  Graphene-based composite materials , 2006, Nature.

[20]  S. Bose,et al.  Recent advances in graphene based polymer composites , 2010 .

[21]  Wojciech Pietraszkiewicz,et al.  Junctions in shell structures: A review , 2015 .

[22]  A. C. Eringen,et al.  STRESS DISTRIBUTION AT TWO NORMALLY INTERSECTING CYLINDRICAL SHELLS , 1965 .

[23]  Huaiwei Huang,et al.  Inelastic Buckling of FGM Cylindrical Shells Subjected to Combined Axial and Torsional Loads , 2017 .

[24]  N. Koratkar,et al.  Enhanced mechanical properties of nanocomposites at low graphene content. , 2009, ACS nano.

[25]  L. Drzal,et al.  Mechanical properties and thermal conductivity of graphene nanoplatelet/epoxy composites , 2015, Journal of Materials Science.

[26]  Ashkan Vaziri,et al.  On the buckling of cracked composite cylindrical shells under axial compression , 2007 .

[27]  W. Schneider,et al.  NUMERICAL BUCKLING STRENGTH VERIFICATION OF CYLINDRICAL STEEL SHELL STRUCTURES SUBJECT TO COMBINED LOADING , 2007 .

[28]  Jie Yang,et al.  Thermoelastic analysis of functionally graded graphene reinforced rectangular plates based on 3D elasticity , 2017 .

[29]  Yong-Wei Zhang,et al.  A molecular dynamics study of the mechanical properties of hydrogen functionalized graphene , 2010 .

[30]  J. Reddy,et al.  BUCKLING AND POSTBUCKLING ANALYSIS OF LAMINATED CYLINDRICAL SHELLS USING THE THIRD-ORDER SHEAR DEFORMATION THEORY , 2004 .

[31]  Yan Wang,et al.  Molecular‐Level Dispersion of Graphene into Poly(vinyl alcohol) and Effective Reinforcement of their Nanocomposites , 2009 .

[32]  M. D. Xue,et al.  Theoretical stress analysis of intersecting cylindrical shells subjected to external loads transmitted through branch pipes , 2005 .

[33]  Mark W. Hilburger,et al.  Response of composite shells with cutouts to internal pressure and compression loads , 1999 .

[34]  J. C. H. Affdl,et al.  The Halpin-Tsai Equations: A Review , 1976 .

[35]  Isaac M Daniel,et al.  Mechanical characterization of graphite/epoxy nanocomposites by multi-scale analysis , 2007 .

[36]  N. Pugno,et al.  Nanoscale Mechanics of Graphene and Graphene Oxide in Composites: A Scientific and Technological Perspective , 2016, Advanced materials.

[37]  Hua Zhang,et al.  A BRIEF REVIEW ON GRAPHENE-NANOPARTICLE COMPOSITES , 2010 .

[38]  S. K. Panda,et al.  PARAMETRIC INSTABILITY OF LAMINATED COMPOSITE CYLINDRICAL PANELS SUBJECTED TO PERIODIC NON-UNIFORM IN-PLANE LOADS , 2011 .

[39]  Stresses at the intersection of two cylindrical shells , 1995 .

[40]  S. K. Sahu,et al.  Dynamic Stability of Woven Fiber Laminated Composite Shallow Shells in Hygrothermal Environment , 2017 .

[41]  Stelios Kyriakides,et al.  Plastic buckling of circular tubes under axial compression—part II: Analysis , 2006 .

[42]  Richard Degenhardt,et al.  Investigation of Buckling Behavior of Composite Shell Structures with Cutouts , 2015, Applied Composite Materials.

[43]  J. Kysar,et al.  Measurement of the Elastic Properties and Intrinsic Strength of Monolayer Graphene , 2008, Science.