Key Performance Indicators of Tubes Used as Energy Absorbers

Based on our extensive studies on the experimental, theoretical and numerical results on various tubes under axial compression/impact in the last few years, we propose a set of Key Performance Indicators (KPIs) to assess and compare the energy absorbing performance of tubular structures with various configurations, so as to guide the design of energy absorbers whilst to archive a certain degree of optimization. The KPIs have five factors: Effective stroke ratio (ESR), Non-dimensional Load-carrying capacity (NLC), Effectiveness of energy absorption (EEA), Specific energy absorption capacity (SEA), Stableness of load-carrying capacity (SLC).The paper presents a series of diagrams to compare the energy absorbing performance of various tubes in terms of the four KPIs as described above. The work is valuable to engineering designs and applications, as well as to the further studies of the topic.

[1]  Tongxi Yu,et al.  Energy Absorption of Structures and Materials , 2003 .

[2]  Ronald Gronsky,et al.  Quasi-static axial crush response of a thin-wall, stainless steel box component , 2004 .

[3]  Mustafa Güden,et al.  The strengthening effect of polystyrene foam filling in aluminum thin-walled cylindrical tubes , 2005 .

[4]  Javad Marzbanrad,et al.  Analytical and experimental studies on quasi-static axial crush behavior of thin-walled tailor-made aluminum tubes , 2012 .

[5]  A. A. Singace,et al.  Further experimental investigation on the eccentricity factor in the progressive crushing of tubes , 1996 .

[6]  Norman Jones,et al.  Dynamic progressive buckling of circular and square tubes , 1986 .

[7]  Abdulmalik A. Alghamdi,et al.  Collapsible impact energy absorbers: an overview , 2001 .

[8]  A. G Mamalis,et al.  The quasi-static crumpling of thin-walled circular cylinders and frusta under axial compression , 1983 .

[9]  O. Hopperstad,et al.  Static and dynamic crushing of square aluminium extrusions with aluminium foam filler , 2000 .

[10]  G. Lu,et al.  Quasi-static axial compression of thin-walled circular aluminium tubes , 2001 .

[11]  P. Cochat,et al.  Et al , 2008, Archives de pediatrie : organe officiel de la Societe francaise de pediatrie.

[12]  F. Rammerstorfer,et al.  Experimental studies on the quasi-static axial crushing of steel columns filled with aluminium foam , 2000 .

[13]  J. M. Alexander.  AN APPROXIMATE ANALYSIS OF THE COLLAPSE OF THIN CYLINDRICAL SHELLS UNDER AXIAL LOADING , 1960 .

[14]  Norman Jones,et al.  Energy-absorbing effectiveness factor , 2010 .