Design and analysis of a connected broadband multi-piezoelectric-bimorph- beam energy harvester

The rapid growth of remote, wireless, and microelectromechanical system (MEMS) devices over the past decades has motivated the development of a self-powered system that can replace traditional electrochemical batteries. Piezoelectric energy harvesters are ideal for capturing energy from mechanical vibrations in the ambient environment. Numerous studies have been made of this application of piezoelectric energy conversion; however, the narrow frequency operation band has limited its application to generate useful power. In this paper, a broadband energy harvester with an array/matrix of piezoelectric bimorphs connected by springs has been designed and analyzed based on the 1-D piezoelectric beam equations. The predicted result shows that the operational frequency band can be enlarged significantly by carefully adjusting the small end masses, length of the beam and spring stiffness. An optimal selection of the load impedance to realize the maximum power output is discussed. The results provide an important foundation for future broadband energy harvester design.

[1]  Henry A. Sodano,et al.  A review of power harvesting using piezoelectric materials (2003–2006) , 2007 .

[2]  S. Priya.  Modeling of electric energy harvesting using piezoelectric windmill , 2005 .

[3]  Ehab F. El-Saadany,et al.  A wideband vibration-based energy harvester , 2008 .

[4]  Michael J. Anderson,et al.  A resonant frequency tunable, extensional mode piezoelectric vibration harvesting mechanism , 2008 .

[5]  Yang Zhang,et al.  Toward self-tuning adaptive vibration-based microgenerators , 2005, SPIE Micro + Nano Materials, Devices, and Applications.

[6]  Huan Xue,et al.  Broadband piezoelectric energy harvesting devices using multiple bimorphs with different operating frequencies , 2008, IEEE Transactions on Ultrasonics, Ferroelectrics and Frequency Control.

[7]  Phillip J. Cornwell,et al.  Enhancing Power Harvesting using a Tuned Auxiliary Structure , 2005 .

[8]  Heath Hofmann,et al.  Damping as a result of piezoelectric energy harvesting , 2004 .

[9]  P. Wright,et al.  Resonance tuning of piezoelectric vibration energy scavenging generators using compressive axial preload , 2006 .

[10]  Huan Xue,et al.  A multi-beam piezoelectric harvesting system with both electrical and mechanical coupling among piezoelectric beams , 2009 .

[11]  Yuantai Hu,et al.  A piezoelectric power harvester with adjustable frequency through axial preloads , 2007 .

[12]  Tuna Balkan,et al.  An electromagnetic micro power generator for wideband environmental vibrations , 2008 .

[13]  S. Farritor,et al.  The use of piezoelectric ceramics for electric power generation within orthopedic implants , 2005, IEEE/ASME Transactions on Mechatronics.

[14]  S. Shahruz.  Design of Mechanical Band-Pass Filters for Energy Scavenging: Multi-Degree-of-Freedom Models , 2008 .

[15]  Norbert Schwesinger,et al.  A Novel Hydropower Harvesting Device , 2004, 2004 International Conference on MEMS, NANO and Smart Systems (ICMENS'04).

[16]  Jiashi Yang,et al.  Performance of a piezoelectric bimorph for scavenging vibration energy , 2005 .

[17]  S. Priya,et al.  Piezoelectric Windmill: A Novel Solution to Remote Sensing , 2004 .

[18]  Joseph R. Burns,et al.  The Energy Harvesting Eel: a small subsurface ocean/river power generator , 2001 .

[19]  José Luis González,et al.  Human Powered Piezoelectric Batteries to Supply Power to Wearable Electronic Devices , 2002 .

[20]  Henry A. Sodano,et al.  Amplified Piezoelectric Stack Actuators for Harvesting Electrical Energy From a Backpack , 2007 .

[21]  F. Moll,et al.  Optimum Piezoelectric Bending Beam Structures for Energy Harvesting using Shoe Inserts , 2005 .

[22]  Rajesh Kumar,et al.  Efficient solar energy harvester for wireless sensor nodes , 2010, 2010 IEEE International Conference on Communication Systems.

[23]  Henry A. Sodano,et al.  Energy harvesting through a backpack employing a mechanically amplified piezoelectric stack , 2008 .

[24]  Jiashi Yang,et al.  Connected Vibrating Piezoelectric Bimorph Beams as a Wide-band Piezoelectric Power Harvester , 2009 .

[25]  Joseph A. Paradiso,et al.  Energy Scavenging with Shoe-Mounted Piezoelectrics , 2001, IEEE Micro.

[26]  S. M. Shahruz,et al.  Design of mechanical band-pass filters with large frequency bands for energy scavenging , 2006 .

[27]  M. F. Lumentut,et al.  Analytical techniques for broadband multielectromechanical piezoelectric bimorph beams with multifrequency power harvesting , 2012, IEEE Transactions on Ultrasonics, Ferroelectrics and Frequency Control.