Low-temperature superplasticity of cryorolled Ti-6Al-4V titanium alloy sheets

[1]  P. Li,et al.  Microstructure evolution and mechanical properties of severely deformed TA15 alloy by multi‐directional forging and annealing , 2022 .

[2]  Ge Zhou,et al.  Modelling of cavity growth during the superplastic flow of a fine-grained Ti–6Al–4V titanium alloy processed by direct rolling , 2022, Philosophical Magazine Letters.

[3]  F. Yu,et al.  Microstructure and mechanical properties of Ti–6Al–4V alloy sheets via room-temperature rolling and cryorolling , 2022, Materials Science and Engineering: A.

[4]  S. Rahimi,et al.  Effect of texture and mechanical anisotropy on flow behaviour in Ti–6Al–4V alloy under superplastic forming conditions , 2021, Materials Science and Engineering: A.

[5]  M. Wan,et al.  Superplastic deformation mechanical behavior and constitutive modelling of a near-α titanium alloy TNW700 sheet , 2021 .

[6]  Qingjiang Wang,et al.  Vacuum superplastic deformation behavior of a near-α titanium alloy TA32 sheet , 2021 .

[7]  Wenjing Zhang,et al.  Superplastic deformation mechanism of the friction stir processed fully lamellar Ti-6Al-4V alloy , 2020 .

[8]  Y. Lin,et al.  Hot tensile properties, microstructure evolution and fracture mechanisms of Ti-6Al-4V alloy with initial coarse equiaxed phases , 2020 .

[9]  F. Mohamed.  Creep and Superplasticity: Evolution and Rationalization , 2020, Advanced Engineering Materials.

[10]  A. Chokshi.  Grain Boundary Processes in Strengthening, Weakening, and Superplasticity , 2019, Advanced Engineering Materials.

[11]  Gang Liu,et al.  Microstructure analysis on enhancing mechanical properties at 750 °C and room temperature of Ti-22Al-24Nb-0.5Mo alloy tubes fabricated by hot gas forming , 2019, Journal of Alloys and Compounds.

[12]  Chao Yang,et al.  A Review on High‐Strength Titanium Alloys: Microstructure, Strengthening, and Properties , 2019, Advanced Engineering Materials.

[13]  Ahmed O. Mosleh,et al.  Superplasticity of Ti-6Al-4V Titanium Alloy: Microstructure Evolution and Constitutive Modelling , 2019, Materials.

[14]  B. Xiao,et al.  Superplastic deformation behavior of lamellar microstructure in a hydrogenated friction stir welded Ti-6Al-4V joint , 2019, Journal of Alloys and Compounds.

[15]  V. Velay,et al.  Superplasticity of metastable ultrafine-grained Ti 6242S alloy: Mechanical flow behavior and microstructural evolution , 2019, Materials Science and Engineering: A.

[16]  Xiang-jie Yang,et al.  Superplastic Deformation Behavior of Multi‐Pass Warm Rolled Ti–6Al–4V Titanium Alloy at Low Temperature and High Strain Rate , 2018 .

[17]  Jae-Keun Hong,et al.  Enhancing Superplasticity of Ultrafine‐Grained Ti–6Al–4V without Imposing Severe Plastic Deformation , 2018, Advanced Engineering Materials.

[18]  Wenjing Yang,et al.  Ultra-grain refinement and enhanced low-temperature superplasticity in a friction stir-processed Ti-6Al-4V alloy , 2018, Materials Science and Engineering: A.

[19]  Shu-zhi Zhang,et al.  Strain rate sensitivity of Ti-22Al-25Nb (at%) alloy during high temperature deformation , 2018 .

[20]  D. L. Chen,et al.  Hot deformation behavior of Ti-6Al-4V alloy: Effect of initial microstructure , 2017 .

[21]  Fei Gao,et al.  Rheological law and constitutive model for superplastic deformation of Ti-6Al-4V , 2017 .

[22]  B. Xiao,et al.  Achieving superior low-temperature superplasticity for lamellar microstructure in nugget of a friction stir welded Ti-6Al-4V joint , 2016 .

[23]  T. Pollock,et al.  Alloy design for aircraft engines. , 2016, Nature materials.

[24]  Roger C. Reed,et al.  On the mechanisms of superplasticity in Ti–6Al–4V , 2016 .

[25]  R. Reed,et al.  Superplasticity in Ti–6Al–4V: Characterisation, modelling and applications , 2015 .

[26]  Tao Zhao,et al.  Superplastic forming and diffusion bonding of Ti–22Al–24Nb alloy , 2015 .

[27]  J. Gago,et al.  Technical and industrial approaches for super plastic forming and diffusion bonding (SPF/DB) titanium alloy leading edge manufacturing , 2014 .

[28]  Zhi-feng Shi,et al.  Study on the hot deformation behavior of TC4-DT alloy with equiaxed α+β starting structure based on processing map , 2014 .

[29]  Xuesong Yang,et al.  An experimental study of deformation mechanism and microstructure evolution during hot deformation of Ti–6Al–2Zr–1Mo–1V alloy , 2013 .

[30]  Yu Sun,et al.  Optimization of hot process parameters of Ti–6.7Al–2Sn–2.2Zr–2.1Mo–1W–0.2Si alloy with lamellar starting microstructure based on the processing map , 2012 .

[31]  W. Zeng,et al.  High-temperature deformation behavior of Ti60 titanium alloy , 2011 .

[32]  S. Leen,et al.  Failure prediction for Titanium alloys using a superplastic forming limit diagram approach , 2008 .

[33]  R. Kaibyshev,et al.  High strain rate superplasticity in a commercial Al–Mg–Sc alloy , 2004 .