Effect of through-plane polytetrafluoroethylene distribution in a gas diffusion layer on a polymer electrolyte unitized reversible fuel cell

Abstract The relationship between through-plan polytetrafluoroethylene (PTFE) distribution on a gas diffusion layer (GDL) and unitized reversible fuel cell (URFC) performance was investigated. Titanium (Ti) - felt was used for the oxygen-side GDL and treated with 10wt.% PTFE dispersion to enhance hydrophobicity. The dependence of PTFE distribution on the PTFE drying conditions was examined using scanning electron microscopy (SEM)-based energy dispersive X-ray spectroscopy (EDS) imaging. The EDS image maps revealed that the PTFE distribution strongly depended on the drying condition of the PTFE; drying under atmospheric pressure yielded a highly non-uniform PTFE distribution in the through-plane direction, whereas drying under vacuum pressure yielded a relatively uniform PTFE distribution. The cell performance of URFCs was then evaluated based on measured current–voltage characteristics during both electrolysis and fuel cell operation modes. Results verified that compared with non-uniform PTFE distribution, a uniform distribution in the Ti-felt GDL improved the fuel cell performance under the fully wet condition (relative humidity = 100%). By applying the Ti-felt GDL with uniform PTFE distribution in the through-plane direction, the current density at the cell voltage of 0.6 V was increased by a factor of about 1.9 compared with the Ti-felt with non-uniform PTFE distribution.

[1]  Katsuya Abe,et al.  Effect of through-plane distribution of polytetrafluoroethylene in carbon paper on in-plane gas permeability , 2014 .

[2]  N. Islam,et al.  Improving the Performance of a PEMFC with Ketjenblack EC-600JD Carbon Black as the Material of the Microporous Layer , 2005 .

[3]  Jiujun Zhang,et al.  A review of water flooding issues in the proton exchange membrane fuel cell , 2008 .

[4]  Zhigang Qi,et al.  Improvement of water management by a microporous sublayer for PEM fuel cells , 2002 .

[5]  Pierre Millet,et al.  Optimization of porous current collectors for PEM water electrolysers , 2009 .

[6]  Toshiaki Konomi,et al.  Microporous layer coated gas diffusion layers for enhanced performance of polymer electrolyte fuel cells , 2010 .

[7]  Emin Caglan Kumbur,et al.  Investigation of macro- and micro-porous layer interaction in polymer electrolyte fuel cells , 2008 .

[8]  Tsutomu Ioroi,et al.  Influence of PTFE coating on gas diffusion backing for unitized regenerative polymer electrolyte fuel cells , 2003 .

[9]  K. Karan,et al.  Experimental investigation of the role of a microporous layer on the water transport and performance of a PEM fuel cell , 2007 .

[10]  Effect of spatial variation of gas diffusion layer wetting characteristics on through-plane water distribution in a polymer electrolyte fuel cell , 2012 .

[11]  Z. Fishman,et al.  Microscale Tomography Investigations of Heterogeneous Porosity Distributions of PEMFC GDLs , 2010 .

[12]  Chang-Soo Kim,et al.  Effect of PTFE contents in the gas diffusion media on the performance of PEMFC , 2004 .

[13]  Chao-Yang Wang,et al.  Effects of hydrophobic polymer content in GDL on power performance of a PEM fuel cell , 2004 .

[14]  A. Shukla,et al.  Effect of diffusion-layer morphology on the performance of polymer electrolyte fuel cells operating at atmospheric pressure , 2000 .

[15]  Yasuo Hasegawa,et al.  Influence of properties of gas diffusion layers on the performance of polymer electrolyte-based unit , 2011 .

[16]  Chi-Chuan Wang,et al.  Water permeation analysis on gas diffusion layers of proton exchange membrane fuel cells for Teflon-coating annotation , 2010 .

[17]  Trung Van Nguyen,et al.  Effect of Thickness and Hydrophobic Polymer Content of the Gas Diffusion Layer on Electrode Flooding Level in a PEMFC , 2005 .

[18]  Thomas W. Tighe,et al.  Water Transport Mechanisms in PEMFC Gas Diffusion Layers , 2010 .

[19]  Jianlu Zhang,et al.  A bi-functional micro-porous layer with composite carbon black for PEM fuel cells , 2006 .

[20]  Tetsuya Yoshida,et al.  Effect of titanium powder loading in gas diffusion layer of a polymer electrolyte unitized reversible fuel cell , 2012 .

[21]  B. Popov,et al.  Effect of carbon loading in microporous layer on PEM fuel cell performance , 2006 .

[22]  P. Cañizares,et al.  Influence of the Teflon loading in the gas diffusion layer of PBI-based PEM fuel cells , 2008 .

[23]  Yosuke Matsukuma,et al.  Understanding mechanism of PTFE distribution in fibrous porous media , 2013 .

[24]  B. Yi,et al.  Facilitating mass transport in gas diffusion layer of PEMFC by fabricating micro-porous layer with dry layer preparation , 2008 .

[25]  V. Radhakrishnan,et al.  Enhanced mechanical and electrochemical durability of multistage PTFE treated gas diffusion layers for proton exchange membrane fuel cells , 2012 .

[26]  J. S. Ellis,et al.  Heterogeneous through-plane distributions of polytetrafluoroethylene in polymer electrolyte membrane fuel cell gas diffusion layers , 2012 .

[27]  B. Popov,et al.  Effect of cathode GDL characteristics on mass transport in PEM fuel cells , 2009 .

[28]  Aimy Bazylak,et al.  Unstructured Pore Network Modeling with Heterogeneous PEMFC GDL Porosity Distributions , 2010 .

[29]  Z. Fishman,et al.  Heterogeneous Through-Plane Porosity Distributions for Treated PEMFC GDLs I. PTFE Effect , 2011 .

[30]  David Harrison,et al.  A review of the latest developments in electrodes for unitised regenerative polymer electrolyte fuel cells , 2006 .