Experimental investigation on the cracking behavior of 3D printed kinked fissure

[1]  Yan Shi,et al.  Detection of sputum by interpreting the time-frequency distribution of respiratory sound signal using image processing techniques , 2017, Bioinform..

[2]  Yan Shi,et al.  An aviation oxygen supply system based on a mechanical ventilation model , 2017 .

[3]  L. F. Fan,et al.  Experimental investigation of thermal effects on dynamic behavior of granite , 2017 .

[4]  Guowei Ma,et al.  Simulation of two-phase flow in horizontal fracture networks with numerical manifold method , 2017 .

[5]  L. Fan,et al.  Effects of Microfracture on Wave Propagation through Rock Mass , 2017 .

[6]  G. Ma,et al.  Micro-mechanical modeling of the macro-mechanical response and fracture behavior of rock using the numerical manifold method , 2017 .

[7]  Sahil Garg,et al.  Numerical simulation of adiabatic and isothermal cracks in functionally graded materials using optimized element-free Galerkin method , 2017 .

[8]  S. Garg,et al.  Numerical simulation of thermal fracture in functionally graded materials using element-free Galerkin method , 2017 .

[9]  Jian Zhu,et al.  Study on air flow dynamic characteristic of mechanical ventilation of a lung simulator , 2017 .

[10]  Sheng-Qi Yang,et al.  An experimental investigation on strength, deformation and crack evolution behavior of sandstone containing two oval flaws under uniaxial compression , 2017 .

[11]  Mohit Pant,et al.  Fatigue Crack Growth Analysis of Functionally Graded Materials by EFGM and XFEM , 2017 .

[12]  G. Zhao,et al.  A Preliminary Study of 3D Printing on Rock Mechanics , 2015, Rock Mechanics and Rock Engineering.

[13]  Yang Ju,et al.  Visualization of the complex structure and stress field inside rock by means of 3D printing technology , 2014 .

[14]  Guowei Ma,et al.  Numerical manifold method (NMM) simulation of stress wave propagation through fractured rock mass , 2013 .

[15]  Bijay K. Mishra,et al.  A novel enrichment criterion for modeling kinked cracks using element free Galerkin method , 2013 .

[16]  Bijay K. Mishra,et al.  Evaluation of mixed mode stress intensity factors for interface cracks using EFGM , 2011 .

[17]  Sheng-Qi Yang,et al.  Strength failure and crack coalescence behavior of brittle sandstone samples containing a single fissure under uniaxial compression , 2011 .

[18]  Seokwon Jeon,et al.  An experimental and numerical study of fracture coalescence in pre-cracked specimens under uniaxial compression , 2011 .

[19]  L. Wong,et al.  Crack Coalescence in Molded Gypsum and Carrara Marble: Part 1. Macroscopic Observations and Interpretation , 2009 .

[20]  Sheng-Qi Yang,et al.  Experimental Investigation on Strength and Failure Behavior of Pre-cracked Marble Under Conventional Triaxial Compression , 2008 .

[21]  A. Carpinteri,et al.  Influence of the crack morphology on the fatigue crack growth rate: A continuously-kinked crack model based on fractals , 2008 .

[22]  Eisaku Umezaki,et al.  Digitally whole-field analysis of isoclinic parameter in photoelasticity by four-step color phase-shifting technique , 2007 .

[23]  Antonio Baldi,et al.  A temporal phase unwrapping algorithm for photoelastic stress analysis , 2007 .

[24]  Luiz Fernando Martha,et al.  Stress intensity factor equations for branched crack growth , 2005 .

[25]  K. T. Ramesh,et al.  Towards effective phase unwrapping in digital photoelasticity , 2004 .

[26]  T. Belytschko,et al.  A method for growing multiple cracks without remeshing and its application to fatigue crack growth , 2004 .

[27]  David A. Dillard,et al.  Crack path selection in adhesively bonded joints: the roles of external loads and speciment geometry , 2002 .

[28]  B. Zuccarello,et al.  Limitation of fourier transform photoelasticity: Influence of isoclinics , 2000 .

[29]  Leslie George Tham,et al.  Numerical studies of the influence of microstructure on rock failure in uniaxial compression — Part I: effect of heterogeneity , 2000 .

[30]  K. T. Ramesh,et al.  Improved determination of retardation in digital photoelasticity by load stepping , 2000 .

[31]  Antonio Bobet,et al.  Modeling of Crack Initiation, Propagation and Coalescence in Uniaxial Compression , 2000 .

[32]  Y. Z. Chen,et al.  Stress intensity factors for curved and kinked cracks in plane extension , 1999 .

[33]  Herbert H. Einstein,et al.  Numerical modeling of fracture coalescence in a model rock material , 1998 .

[34]  David P. Towers,et al.  New approaches to the full-field analysis of photoelastic stress patterns , 1996 .

[35]  H. Noguchi,et al.  Stress intensity factors at tips of branched cracks under various loadings , 1992 .

[36]  John A. Nairn,et al.  The Strain Energy Release Rate of Composite Microcracking: A Variational Approach , 1989 .

[37]  S. Nemat-Nasser,et al.  Compression‐induced nonplanar crack extension with application to splitting, exfoliation, and rockburst , 1982 .

[38]  Robert J. Sanford,et al.  Application of the least-squares method to photoelastic analysis , 1980 .

[39]  Chien H. Wu.  Elasticity problems of a slender Z-crack , 1978 .

[40]  R. Nuismer.  An energy release rate criterion for mixed mode fracture , 1975 .

[41]  B. Cotterell.  Brittle fracture in compression , 1972 .

[42]  W. F. Brace,et al.  A note on brittle crack growth in compression , 1963 .

[43]  Huang Run-qiu.  Mechanism of fracture mechanics and physical model test of rocks crack expanding under tension-shear stress , 2011 .

[44]  Gao Huajian,et al.  Slightly curved or kinked cracks in anisotropic elastic solids , 1992 .