Biocompatible, degradable thermoplastic polyurethane based on polycaprolactone-block-polytetrahydrofuran-block-polycaprolactone copolymers for soft tissue engineering.

Biodegradable synthetic polymers have been widely used as tissue engineering scaffold materials. Even though they have shown excellent biocompatibility, they have failed to resemble the low stiffness and high elasticity of soft tissues because of the presence of massive rigid ester bonds. Herein, we synthesized a new thermoplastic polyurethane elastomer (CTC-PU(BET)) using poly ester ether triblock copolymer (polycaprolactone-block-polytetrahydrofuran-block-polycaprolactone triblock copolymer, PCTC) as the soft segment, aliphatic diisocyanate (hexamethylene diisocyanate, HDI) as the hard segment, and degradable diol (bis(2-hydroxyethyl) terephthalate, BET) as the chain extender. PCTC inhibited crystallization and reduced the melting temperature of CTC-PU(BET), and BET dramatically enhanced the thermal decomposition and hydrolytic degradation rate when compared with conventional polyester-based biodegradable TPUs. The CTC-PU(BET) synthesized in this study possessed a low tensile modulus and tensile strength of 2.2 MPa and 1.3 MPa, respectively, and an elongation-at-break over 700%. Meanwhile, it maintained a 95.3% recovery rate and 90% resilience over ten cycles of loading and unloading. In addition, the TPU could be electrospun into both random and aligned fibrous scaffolds consisting of major microfibers and nanobranches. 3T3 fibroblast cell culture confirmed that these scaffolds outperformed the conventional biodegradable TPU scaffolds in terms of substrate-cellular interactions and cell proliferation. Considering the advantages of this TPU, such as ease of synthesis, low cost, low stiffness, high elasticity, controllable degradation rate, ease of processability, and excellent biocompatibility, it has great prospects to be used as a tissue engineering scaffold material for soft tissue regeneration.

[1]  C. Laurencin,et al.  Biodegradable polymers as biomaterials , 2007 .

[2]  Liqun Zhang,et al.  Synthesis, preparation, in vitro degradation, and application of novel degradable bioelastomers—A review , 2012 .

[3]  Jyothi U. Menon,et al.  Electrospun biodegradable elastic polyurethane scaffolds with dipyridamole release for small diameter vascular grafts. , 2014, Acta biomaterialia.

[4]  N. Shelke,et al.  Guided differentiation of bone marrow stromal cells on co-cultured cartilage and bone scaffolds. , 2015, Soft matter.

[5]  P. Janmey,et al.  Tissue Cells Feel and Respond to the Stiffness of Their Substrate , 2005, Science.

[6]  Lih-Sheng Turng,et al.  Electrospun aligned poly(propylene carbonate) microfibers with chitosan nanofibers as tissue engineering scaffolds. , 2015, Carbohydrate polymers.

[7]  Abhay Pandit,et al.  Characterization of a slowly degrading biodegradable polyester-urethane for tissue engineering scaffolds. , 2007, Journal of biomedical materials research. Part A.

[8]  X. Mo,et al.  Biodegradable poly(ester urethane)urea elastomers with variable amino content for subsequent functionalization with phosphorylcholine. , 2014, Acta biomaterialia.

[9]  Michael S Sacks,et al.  Synthesis, characterization, and cytocompatibility of elastomeric, biodegradable poly(ester-urethane)ureas based on poly(caprolactone) and putrescine. , 2002, Journal of biomedical materials research.

[10]  Hu Zhou,et al.  Preparation and application of novel biodegradable polyurethane copolymer , 2016 .

[11]  Pieter Buma,et al.  Uncatalyzed synthesis, thermal and mechanical properties of polyurethanes based on poly(epsilon-caprolactone) and 1,4-butane diisocyanate with uniform hard segment. , 2005, Biomaterials.

[12]  S. Hsu,et al.  Preparation and characterization of a biodegradable polyurethane hydrogel and the hybrid gel with soy protein for 3D cell-laden bioprinting. , 2016, Journal of materials chemistry. B.

[13]  H. Gong,et al.  Degradable polyurethane based on star-shaped polyester polyols (trimethylolpropane and ɛ-caprolactone) for marine antifouling , 2015 .

[14]  Katherine D Kavlock,et al.  Synthesis and characterization of segmented poly(esterurethane urea) elastomers for bone tissue engineering. , 2007, Acta biomaterialia.

[15]  P. Ma,et al.  Biocompatible, Biodegradable, and Electroactive Polyurethane-Urea Elastomers with Tunable Hydrophilicity for Skeletal Muscle Tissue Engineering. , 2015, ACS applied materials & interfaces.

[16]  Ning Zhang,et al.  Stretchable Polymeric Multielectrode Array for Conformal Neural Interfacing , 2013, Advanced materials.

[17]  Xiangfang Peng,et al.  Characterization and properties of electrospun thermoplastic polyurethane blend fibers: Effect of solution rheological properties on fiber formation , 2013 .

[18]  P. Neuenschwander,et al.  Structural variants of biodegradable polyesterurethane in vivo evoke a cellular and angiogenic response that is dictated by architecture. , 2009, Acta biomaterialia.

[19]  J. Gosline,et al.  Elastic proteins: biological roles and mechanical properties. , 2002, Philosophical transactions of the Royal Society of London. Series B, Biological sciences.

[20]  W. Wagner,et al.  Synthesis, characterization, and paclitaxel release from a biodegradable, elastomeric, poly(ester urethane)urea bearing phosphorylcholine groups for reduced thrombogenicity. , 2012, Biomacromolecules.

[21]  H. Bergmeister,et al.  Hard‐block degradable thermoplastic urethane‐elastomers for electrospun vascular prostheses , 2012 .

[22]  X. Wen,et al.  Improving the elasticity and cytophilicity of biodegradable polyurethane by changing chain extender. , 2006, Journal of biomedical materials research. Part B, Applied biomaterials.

[23]  B. Ratner,et al.  Rapidly Biodegrading PLGA-Polyurethane Fibers for Sustained Release of Physicochemically Diverse Drugs. , 2016, ACS biomaterials science & engineering.

[24]  Molly M Stevens,et al.  Synthetic polymer scaffolds for tissue engineering. , 2009, Chemical Society reviews.

[25]  G. Abraham,et al.  Electrospun nanofibrous scaffolds of segmented polyurethanes based on PEG, PLLA and PTMC blocks: Physico-chemical properties and morphology. , 2015, Materials science & engineering. C, Materials for biological applications.

[26]  D. Dudek,et al.  Designed biomaterials to mimic the mechanical properties of muscles , 2010, Nature.

[27]  J. Sanders,et al.  Melt electrospinning of biodegradable polyurethane scaffolds. , 2011, Acta biomaterialia.

[28]  Theo H Smit,et al.  Scaffold Stiffness Influences Cell Behavior: Opportunities for Skeletal Tissue Engineering , 2008, The Open Orthopaedics Journal.

[29]  X. Loh,et al.  Poly(glycerol sebacate) biomaterial: synthesis and biomedical applications. , 2015, Journal of materials chemistry. B.

[30]  M. Sacks,et al.  Biodegradable poly(ether ester urethane)urea elastomers based on poly(ether ester) triblock copolymers and putrescine: synthesis, characterization and cytocompatibility. , 2004, Biomaterials.

[31]  D. Cohn,et al.  Designing biodegradable multiblock PCL/PLA thermoplastic elastomers. , 2005, Biomaterials.

[32]  Lih-Sheng Turng,et al.  Electrospinning of unidirectionally and orthogonally aligned thermoplastic polyurethane nanofibers: fiber orientation and cell migration. , 2015, Journal of biomedical materials research. Part A.

[33]  Xiangfang Peng,et al.  Shish-kebab-structured poly(ε-caprolactone) nanofibers hierarchically decorated with chitosan-poly(ε-caprolactone) copolymers for bone tissue engineering. , 2015, ACS applied materials & interfaces.

[34]  E. J. Chung,et al.  Advances and Applications of Biodegradable Elastomers in Regenerative Medicine , 2010 .

[35]  A. Díez-Pascual,et al.  Electrospun fibers of chitosan-grafted polycaprolactone/poly(3-hydroxybutyrate-co-3-hydroxyhexanoate) blends. , 2016, Journal of materials chemistry. B.

[36]  J C Middleton,et al.  Synthetic biodegradable polymers as orthopedic devices. , 2000, Biomaterials.

[37]  S. Oh,et al.  Creating stiffness gradient polyvinyl alcohol hydrogel using a simple gradual freezing-thawing method to investigate stem cell differentiation behaviors. , 2015, Biomaterials.

[38]  Darren J. Martin,et al.  Release of bioactive peptides from polyurethane films in vitro and in vivo: Effect of polymer composition. , 2016, Acta biomaterialia.

[39]  Timothy E. Long,et al.  Electrospinning of linear and highly branched segmented poly(urethane urea)s , 2005 .

[40]  Michael S Sacks,et al.  Preparation and characterization of highly porous, biodegradable polyurethane scaffolds for soft tissue applications. , 2005, Biomaterials.

[41]  X. Mo,et al.  Thiol click modification of cyclic disulfide containing biodegradable polyurethane urea elastomers. , 2015, Biomacromolecules.

[42]  Congju Li,et al.  Preparation and characterization of poly(ɛ-caprolactone) nonwoven mats via melt electrospinning , 2012 .

[43]  J. Lévêque,et al.  Mechanical properties and Young's modulus of human skin in vivo , 2004, Archives of Dermatological Research.

[44]  Hao Xu,et al.  Development of biodegradable crosslinked urethane-doped polyester elastomers. , 2008, Biomaterials.

[45]  P. C. Caracciolo,et al.  Effect of the hard segment chemistry and structure on the thermal and mechanical properties of novel biomedical segmented poly(esterurethanes) , 2009, Journal of materials science. Materials in medicine.

[46]  Cynthia A. Reinhart-King,et al.  Tuning three-dimensional collagen matrix stiffness independently of collagen concentration modulates endothelial cell behavior. , 2013, Acta biomaterialia.

[47]  Samuel K. Luketich,et al.  Nonthrombogenic, biodegradable elastomeric polyurethanes with variable sulfobetaine content. , 2014, ACS applied materials & interfaces.

[48]  K. Leong,et al.  The design of scaffolds for use in tissue engineering. Part I. Traditional factors. , 2001, Tissue engineering.

[49]  P. Ramesh,et al.  Electrospun biodegradable calcium containing poly(ester-urethane)urea: synthesis, fabrication, in vitro degradation, and biocompatibility evaluation. , 2013, Journal of biomedical materials research. Part A.

[50]  Johnson V. John,et al.  Influence of soft segment content and chain length on the physical properties of poly(ether ester) elastomers and fabrication of honeycomb pattern and electrospun fiber , 2013 .

[51]  F. Malherbe,et al.  Thermoplastic biodegradable polyurethanes: the effect of chain extender structure on properties and in-vitro degradation. , 2007, Biomaterials.

[52]  Young Ha Kim,et al.  Elastic biodegradable poly(glycolide-co-caprolactone) scaffold for tissue engineering. , 2003, Journal of biomedical materials research. Part A.

[53]  Kwideok Park,et al.  Bioactive cell-derived matrices combined with polymer mesh scaffold for osteogenesis and bone healing. , 2015, Biomaterials.

[54]  P. Ma,et al.  Electroactive biodegradable polyurethane significantly enhanced Schwann cells myelin gene expression and neurotrophin secretion for peripheral nerve tissue engineering. , 2016, Biomaterials.

[55]  A. Batchelor,et al.  An Introduction to Biocomposites , 2004 .

[56]  J. Kohn,et al.  Physico-mechanical properties of degradable polymers used in medical applications: a comparative study. , 1991, Biomaterials.

[57]  Valeria Chiono,et al.  Trends in the design of nerve guidance channels in peripheral nerve tissue engineering , 2015, Progress in Neurobiology.

[58]  P. Tresco,et al.  Relative importance of surface wettability and charged functional groups on NIH 3T3 fibroblast attachment, spreading, and cytoskeletal organization. , 1998, Journal of biomedical materials research.

[59]  Lisheng Zhang,et al.  Bio-based shape memory polyurethanes (Bio-SMPUs) with short side chains in the soft segment , 2014 .

[60]  J. Cauich‐Rodríguez,et al.  Degradation studies on segmented polyurethanes prepared with HMDI, PCL and different chain extenders. , 2010, Acta biomaterialia.

[61]  Alyssa Panitch,et al.  Polymeric biomaterials for tissue and organ regeneration , 2001 .

[62]  Heinrich Schima,et al.  Biodegradable, thermoplastic polyurethane grafts for small diameter vascular replacements. , 2015, Acta biomaterialia.

[63]  Yusuke Arima,et al.  Effect of wettability and surface functional groups on protein adsorption and cell adhesion using well-defined mixed self-assembled monolayers. , 2007, Biomaterials.

[64]  Eric J Beckman,et al.  Synthesis of biocompatible segmented polyurethanes from aliphatic diisocyanates and diurea diol chain extenders. , 2005, Acta biomaterialia.

[65]  Jian Yang,et al.  Biodegradable polyester elastomers in tissue engineering , 2004, Expert opinion on biological therapy.

[66]  Yadong Wang,et al.  Fast degrading elastomer enables rapid remodeling of a cell-free synthetic graft into a neo-artery , 2011, Nature Medicine.

[67]  S. Hatem,et al.  Adult cardiac myocytes survive and remain excitable during long-term culture on synthetic supports. , 2001, The Journal of thoracic and cardiovascular surgery.