Cure behaviour and void development within rapidly cured out-of-autoclave composites

[1]  Prepreg, tape and fabric technology for advanced composites , 1983 .

[2]  J. L. Kardos,et al.  Void growth and resin transport during processing of thermosetting — Matrix composites , 1986 .

[3]  Peter R. Ciriscioli,et al.  Cure Kinetics and Viscosity of Fiberite 976 Resin , 1987 .

[4]  S. W. Lye,et al.  Void reduction in autoclave processing of thermoset composites. I - High pressure effects on void reduction. II - Void reduction in a microwave curing process , 1992 .

[5]  Philippe Olivier,et al.  Effects of cure cycle pressure and voids on some mechanical properties of carbon/epoxy laminates , 1995 .

[6]  F. C. Campbell,et al.  Porosity in carbon fiber composites an overview of causes , 1995 .

[7]  R. Boswell,et al.  Degree of Cure, Heat of Reaction, and Viscosity of 8552 and 977-3 HM Epoxy Resin , 2000 .

[8]  Sanjay Mazumdar,et al.  Composites Manufacturing: Materials, Product, and Process Engineering , 2001, The Aeronautical Journal (1968).

[9]  Measurement of the degree of cure of glass fiber–epoxy composites using dielectrometry , 2001 .

[10]  R. Day,et al.  Flexural and interlaminar shear strength properties of carbon fibre/epoxy composites cured thermally and with microwave radiation , 2002 .

[11]  Liangfeng Sun.  Thermal rheological analysis of cure process of epoxy prepreg , 2002 .

[12]  Effect of cure pressure on the behaviour of woven carbon/epoxy composite materials , 2003 .

[13]  Boming Zhang,et al.  Effects of cure cycles on void content and mechanical properties of composite laminates , 2006 .

[14]  Leon W. Davies,et al.  Effect of cure cycle heat transfer rates on the physical and mechanical properties of an epoxy matrix composite , 2007 .

[15]  Interface design of polymer matrix composites : mechanics, chemistry, modelling and manufacturing : proceedings of the 28th Risø International Symposium on Materials Science, 3-6 September 2007 , 2007 .

[16]  Jue Cheng,et al.  Synthesis and characterization of novel multifunctional epoxy resin , 2007 .

[17]  Mohamed Kheireddine Aroua,et al.  Curing of polymeric composites using microwave resin transfer moulding (RTM) , 2007 .

[18]  R. Day,et al.  Comparison of the mechanical and physical properties of a carbon fibre epoxy composite manufactured by resin transfer moulding using conventional and microwave heating , 2008 .

[19]  Z. Stachurski,et al.  Effect of low frequency vibrations on void content in composite materials , 2009 .

[20]  S. Murugavel,et al.  Spectral, thermal, and photoreactivity studies on epoxy resin containing benzylidene units in the main chain , 2009 .

[21]  J. Kyono,et al.  Influence of prepreg conditions on the void occurrence and tensile properties of woven glass fiber-reinforced polyimide composites , 2009 .

[22]  S. Agius,et al.  Fracture behaviour of a rapidly cured polyethersulfone toughened carbon fibre/epoxy composite , 2010 .

[23]  S. Nutt,et al.  Void formation in composite prepregs – Effect of dissolved moisture , 2010 .

[24]  Z. Stachurski,et al.  On the void reduction mechanisms in vibration assisted consolidation of fibre reinforced polymer composites , 2011 .