A behavioural sensor for fish stress

Abstract Due to water turbidity, fish stress might be difficult to observe. Evaluation of fish stress by blood sampling requires removing a fish from the water, which is in itself a stressful event. Therefore, we designed and built a sensor to detect fish behaviour that reflects stress. The electronic sensor detected early signs of fish stress by scoring the fish's inactivity. LEDs and detectors are embedded on a steel wand that is held underwater by an operator. In this preliminary (feasibility) study, the new sensor was validated for Tilapia ( Cichlidae ) and Hybrid Striped Bass (Morone) . We induced stressful situations in the fish tanks by manipulating oxygen and temperature levels. Results Lowering the temperature and oxygen levels both significantly increased the average number of signals identified by the sensor, which indicate stress. The effect of reducing water temperature from 24 °C to 15 °C was three times stronger than was the effect of lowering the oxygen saturation level from 85% to 50%. The difference in the number of signals between the good and stressful conditions was statistically significant, amounting to approximately eight sensor signals, 10.57 compared to 2.49 respectively. Lowering the temperature increased the mean number of signals by 5.85 and 6.06 at 85% and 50% oxygen saturation respectively, whereas lowering oxygen levels increased the mean number of signals by 2.02 and 2.23 at 24 °C and 15 °C, respectively. The results indicate that the stress status of cultured fish can be evaluated using the proposed behavioural sensor. The new sensor may provide an earlier indication of a problem in a fish tank or pond than was heretofore possible. This early warning can enable the fish farmer to take action before many fish are harmed.