Optimum number of cascaded cells for high-power medium-voltage multilevel converters

When power electronic systems are connected to the medium-voltage grid, often multilevel topologies consisting of a number of cascaded converter cells are considered. For a given grid voltage level, either few cells featuring semiconductors with high blocking voltage capability or many cells using low-voltage semiconductors can be employed. This paper proposes efficiency/power density (η-ρ) Pareto analysis to comprehensively identify the optimum number of cascaded cells. Recent advances in silicon carbide (SiC) semiconductor technology point towards devices with blocking voltages exceeding 15kV. The switching characteristics that hypothetical SiC devices would have to provide in order to realize a simple single-stage full-bridge converter competitive to a multilevel solution are derived and found to be impracticably fast. Furthermore, it is shown that reliability concerns arising with increasing number of cascaded cells can be mitigated by means of redundancy.

[1]  M. Steiner,et al.  Medium frequency topology in railway applications , 2007, 2007 European Conference on Power Electronics and Applications.

[2]  J. Rabkowski,et al.  Silicon Carbide Power Transistors: A New Era in Power Electronics Is Initiated , 2012, IEEE Industrial Electronics Magazine.

[3]  U. Drofenik,et al.  A General Scheme for Calculating Switching- and Conduction-Losses of Power Semiconductors in Numerical Circuit Simulations of Power Electronic Systems; International Power Electronics Conference; ; IPEC-Niigata 2005 , 2005 .

[4]  Drazen Dujic,et al.  Power electronic traction transformer technology , 2012, Proceedings of The 7th International Power Electronics and Motion Control Conference.

[5]  J. Kolar,et al.  Theoretical Converter Power Density Limits for Forced Convection Cooling , 2005 .

[6]  Fang Zheng Peng,et al.  Multilevel inverters: a survey of topologies, controls, and applications , 2002, IEEE Trans. Ind. Electron..

[7]  Prasad Enjeti,et al.  Analysis and design of electronic transformers for electric power distribution system , 1997 .

[8]  大熊康浩,et al.  Electric power converter , 2011 .

[9]  Subhashish Bhattacharya,et al.  Transformer less Intelligent Power Substation design with 15kV SiC IGBT for grid interconnection , 2011, 2011 IEEE Energy Conversion Congress and Exposition.

[10]  S. Bernet,et al.  Power loss-oriented evaluation of high voltage IGBTs and multilevel converters in transformerless traction applications , 2005, IEEE Transactions on Power Electronics.

[11]  Boon-Teck Ooi,et al.  Microprocessor implemented SPWM for multiconverters with phase-shifted triangle carriers , 1997, IAS '97. Conference Record of the 1997 IEEE Industry Applications Conference Thirty-Second IAS Annual Meeting.

[12]  Jun Wang,et al.  Smart grid technologies , 2009, IEEE Industrial Electronics Magazine.

[13]  A. Agarwal,et al.  SiC Power Devices for Microgrids , 2010, IEEE Transactions on Power Electronics.

[14]  Bin Wu,et al.  Multilevel Voltage-Source-Converter Topologies for Industrial Medium-Voltage Drives , 2007, IEEE Transactions on Industrial Electronics.

[15]  Nando Kaminski,et al.  State of the art and the future of wide band-gap devices , 2009, 2009 13th European Conference on Power Electronics and Applications.

[16]  Michael Weiss,et al.  Design, implementation and performance of a modular power electronic transformer (PET) for railway application , 2011, Proceedings of the 2011 14th European Conference on Power Electronics and Applications.

[17]  H. Akagi,et al.  Active-Power Control of Individual Converter Cells for a Battery Energy Storage System Based on a Multilevel Cascade PWM Converter , 2012, IEEE Transactions on Power Electronics.

[18]  S. D. Sudhoff,et al.  A Power Electronic-Based Distribution Transformer , 2002, IEEE Power Engineering Review.

[19]  Yusuke Hayashi,et al.  Study on High Power Density Integration of Multilevel Converters , 2006 .

[20]  Jun Wang,et al.  270 kVA Solid State Transformer Based on 10 kV SiC Power Devices , 2007, 2007 IEEE Electric Ship Technologies Symposium.

[21]  L. Heinemann,et al.  The universal power electronics based distribution transformer, an unified approach , 2001, 2001 IEEE 32nd Annual Power Electronics Specialists Conference (IEEE Cat. No.01CH37230).

[22]  H. A. Nienhaus,et al.  A solid state transformer , 1980, 1980 IEEE Power Electronics Specialists Conference.

[23]  A. I. Maswood,et al.  Silicon carbide based inverters for energy efficiency , 2012, 2012 IEEE Transportation Electrification Conference and Expo (ITEC).

[24]  A. Agarwal,et al.  High performance, ultra high voltage 4H-SiC IGBTs , 2012, 2012 IEEE Energy Conversion Congress and Exposition (ECCE).

[25]  D. Peftitsis,et al.  High-Power Modular Multilevel Converters With SiC JFETs , 2010, IEEE Transactions on Power Electronics.

[26]  F.Z. Peng,et al.  A 24-pulse rectifier cascaded multilevel inverter with minimum number of transformer windings , 2005, Fourtieth IAS Annual Meeting. Conference Record of the 2005 Industry Applications Conference, 2005..

[27]  A. Birolini.  Quality and reliability of technical systems , 1994 .

[28]  Hirofumi Akagi,et al.  A New Neutral-Point-Clamped PWM Inverter , 1981, IEEE Transactions on Industry Applications.

[29]  Giri Venkataramanan,et al.  Power electronic transformers for utility applications , 2000, Conference Record of the 2000 IEEE Industry Applications Conference. Thirty-Fifth IAS Annual Meeting and World Conference on Industrial Applications of Electrical Energy (Cat. No.00CH37129).

[30]  Fei Wang,et al.  Review of solid state transformer in the distribution system: From components to field application , 2012, 2012 IEEE Energy Conversion Congress and Exposition (ECCE).

[31]  S. Waffler,et al.  Performance trends and limitations of power electronic systems , 2010, 2010 6th International Conference on Integrated Power Electronics Systems.

[32]  Eisuke Masada,et al.  The Connection of converters instead of semiconductor Power Devices - a High Performance Solution for the MVA Range of Power Comverters , 1995, J. Circuits Syst. Comput..

[33]  T.A. Meynard,et al.  Multi-level conversion: high voltage choppers and voltage-source inverters , 1992, PESC '92 Record. 23rd Annual IEEE Power Electronics Specialists Conference.

[34]  J. W. Kolar,et al.  Medium frequency transformers for solid-state-transformer applications — Design and experimental verification , 2013, 2013 IEEE 10th International Conference on Power Electronics and Drive Systems (PEDS).

[35]  Rik W. De Doncker,et al.  Development of a modular high-power converter system for battery energy storage systems , 2011, Proceedings of the 2011 14th European Conference on Power Electronics and Applications.

[36]  Alex Q. Huang,et al.  Comparisons of 6.5kV 25A Si IGBT and 10-kV SiC MOSFET in Solid-State Transformer application , 2010, 2010 IEEE Energy Conversion Congress and Exposition.

[37]  C. Keller,et al.  Are paralleled IGBT modules or paralleled IGBT inverters the better choice , 2002 .

[38]  J. Rodriguez,et al.  Switching loss analysis of modulation methods used in cascaded H-bridge multilevel converters , 2008, 2008 IEEE Power Electronics Specialists Conference.

[39]  J. Cooper,et al.  High-Voltage n-Channel IGBTs on Free-Standing 4H-SiC Epilayers , 2010, IEEE Transactions on Electron Devices.

[40]  J. W. Kolar,et al.  η-ρ Pareto optimization of bidirectional half-cycle discontinuous-conduction-mode series-resonant DC/DC converter with fixed voltage transfer ratio , 2013, 2013 Twenty-Eighth Annual IEEE Applied Power Electronics Conference and Exposition (APEC).

[41]  Bin Wu,et al.  Switching loss analysis of modulation methods used in neutral point clamped converters , 2009, 2009 IEEE Energy Conversion Congress and Exposition.