Experiment investigation of laser shock peening on TC6 titanium alloy to improve high cycle fatigue performance

Abstract Laser shock peening (LSP) is an innovative surface treatment technique, and can significantly improve the fatigue performance of metallic components. In this paper, the objective of this work was to improve the fatigue resistance of TC6 titanium alloy by laser shock peening. Firstly, the effects on the microstructure and mechanical properties with different LSP impacts were investigated, which were observed and measured by X-ray diffraction (XRD), transmission electron microscope (TEM), residual stress tester and microhardness tester. Specially, nanostructure was detected in the laser-peened surface layer with multiple LSP impacts. Whereafter, a better parameter was chosen to be applied on the standard vibration fatigue specimens. Via the high-cycle vibration fatigue tests, the high cycle fatigue limits of the specimens without and with LSP were obtained and compared. The fatigue results demonstrate that LSP can effectively improve the fatigue limit of TC6 titanium alloy. The strengthening mechanism was indicated by analyzing the effects on the microstructure and mechanical properties comprehensively.

[1]  Carlos Molpeceres,et al.  Experimental assessment of the influence of irradiation parameters on , 2004 .

[2]  Liucheng Zhou,et al.  Deforming TC6 titanium alloys at ultrahigh strain rates during multiple laser shock peening , 2013 .

[3]  S. Fouvry,et al.  Comparison of Shot Peening and Nitriding Surface Treatments under Complex Fretting Loadings , 2006 .

[4]  Zhang Yongkang,et al.  Investigation of the surface qualities of laser shock-processed zones and the effect on fatigue life of aluminum alloy , 1997 .

[5]  Jed Lyons,et al.  Laser and shot peening effects on fatigue crack growth in friction stir welded 7075-T7351 aluminum alloy joints , 2007 .

[6]  A. Vadiraj,et al.  Effect of surface treatments on fretting fatigue damage of biomedical titanium alloys , 2007 .

[7]  K. Kurtz,et al.  Laser surface treatment to improve mechanical properties of cast titanium. , 2009, Dental materials : official publication of the Academy of Dental Materials.

[8]  Patrick J. Golden,et al.  Effect of surface treatments on fretting fatigue of Ti–6Al–4V , 2007 .

[9]  Sangho Kim,et al.  Effects of microstructural morphology on quasi-static and dynamic deformation behavior of Ti-6Al-4V alloy , 2001 .

[10]  J. Ocaña,et al.  Effect of laser shock processing on fatigue crack growth and fracture toughness of 6061-T6 aluminum alloy , 2004 .

[11]  M. François,et al.  Laser shock peening of Ti-17 titanium alloy: Influence of process parameters , 2012 .

[12]  Y. Mai,et al.  Laser shock processing and its effects on microstructure and properties of metal alloys: a review , 2002 .

[13]  Lai‐Chang Zhang,et al.  Grain refinement mechanism of multiple laser shock processing impacts on ANSI 304 stainless steel , 2010 .

[14]  K. Luo,et al.  Grain refinement of LY2 aluminum alloy induced by ultra-high plastic strain during multiple laser shock processing impacts , 2010 .

[15]  David F. Lahrman,et al.  Laser Shock Processing as a Surface Enhancement Process , 2001 .

[16]  X. Nie,et al.  Experiment investigation on microstructure and mechanical properties of TC17 titanium alloy treated by laser shock peening with different laser fluence , 2013 .

[17]  Berthold Scholtes,et al.  On the influence of mechanical surface treatments—deep rolling and laser shock peening—on the fatigue behavior of Ti–6Al–4V at ambient and elevated temperatures , 2003 .

[18]  Naruhiko Mukai,et al.  Retardation of crack initiation and growth in austenitic stainless steels by laser peening without protective coating , 2006 .