Phase change material thermal storage for biofuel preheating in micro trigeneration application: A numerical study

A biofuel micro trigeneration prototype has been developed to utilise local energy crop oils as fuel in rural areas and developing countries. Straight plant oils (SPOs) only leave behind very little carbon footprint during its simply production process compared to commercial biodiesels in refineries, but the high viscosity of SPOs causes difficulties at engine cold starts, which further results in poor fuel atomisation, compromised engine performance and fast engine deterioration. In this study, a phase change material (PCM) thermal storage is designed to recover and store engine exhaust heat to preheat SPOs at cold starts. High temperature commercial paraffin is selected as the PCM to meet the optimal preheating temperature range of 70–90°C, in terms of the SPO property study. A numerical model of the PCM thermal storage is developed and validated by references. The PCM melting and solidification processes with the consideration of natural convection in liquid zone are simulated in ANSYS-FLUENT to verify the feasibility of the PCM thermal storage as a part of the self-contained biofuel micro trigeneration prototype.

[1]  E. Bilgen,et al.  Phase change process by natural convection–diffusion in rectangular enclosures , 2001 .

[2]  Adam Harvey,et al.  Micro distributed energy system driven with preheated Croton megalocarpus oil – A performance and particulate emission study , 2013 .

[3]  S. Bari,et al.  Effects of preheating of crude palm oil (CPO) on injection system, performance and emission of a diesel engine , 2002 .

[4]  Amar M. Khudhair,et al.  A review on phase change energy storage: materials and applications , 2004 .

[5]  K. Sagara,et al.  Latent Heat Storage Materials and Systems: A Review , 2005 .

[6]  Thermodynamics of heat storage in a PCM shell-and-tube heat exchanger in parallel or in series with a heat engine , 1996 .

[7]  A. Abhat.  Low temperature latent heat thermal energy storage: Heat storage materials , 1983 .

[8]  Dacheng Li,et al.  A trigeneration system based on compressed air and thermal energy storage , 2012 .

[9]  Abul Kalam Hossain,et al.  Plant oils as fuels for compression ignition engines: a technical review and life-cycle analysis , 2010 .

[10]  S. D. Sharma,et al.  Accelerated thermal cycle test of acetamide, stearic acid and paraffin wax for solar thermal latent heat storage applications , 2002 .

[11]  Satya N. Atluri,et al.  Computational heat transfer , 1986 .

[12]  V. Voller,et al.  A fixed grid numerical modelling methodology for convection-diffusion mushy region phase-change problems , 1987 .

[13]  Michele Pinelli,et al.  Solid/Liquid Phase Change in Presence of Natural Convection: A Thermal Energy Storage Case Study , 2003 .

[14]  Frank P. Incropera,et al.  Fundamentals of Heat and Mass Transfer , 1981 .

[15]  Rahman Saidur,et al.  Analysis of a thermal energy storage System for air cooling-heating application through cylindrical tube , 2013 .

[16]  A. Roskilly,et al.  Croton megalocarpus oil-fired micro-trigeneration prototype for remote and self-contained applications: experimental assessment of its performance and gaseous and particulate emissions , 2013, Interface Focus.

[17]  Chie Gau,et al.  Melting and Solidification of a Pure Metal on a Vertical Wall , 1986 .

[18]  Joanne M. Bailey.  Modelling Phase Change Material Thermal Storage Systems , 2010 .

[19]  Jinjia Wei,et al.  Study on a PCM heat storage system for rapid heat supply , 2005 .

[20]  E. Korin,et al.  Reducing cold-start emission from internal combustion engines by means of a catalytic converter embedded in a phase-change material , 1999 .

[21]  S. O. Enibe,et al.  Performance of a natural circulation solar air heating system with phase change material energy storage , 2002 .

[22]  Kibum Kim,et al.  Feasibility study on a novel cooling technique using a phase change material in an automotive engine , 2010 .

[23]  C. Muraleedharan,et al.  Use of vegetable oils as I.C. engine fuels—A review , 2004 .

[24]  M. Rosen,et al.  PHASE CHANGE MATERIAL SOLIDIFICATION IN A FINNED CYLINDRICAL SHELL THERMAL ENERGY STORAGE An approximate analytical approach , 2013 .