A Comparison of Robot Wrist Implementations for the iCub Humanoid

This article provides a detailed comparative analysis of five orientational, two degrees of freedom (DOF) mechanisms whose envisioned application is the wrist of the iCub humanoid robot. Firstly, the current iCub mk.2 wrist implementation is presented, and the desired design objectives are proposed. Prominent architectures from literature such as the spherical five-bar linkage and spherical six-bar linkage, the OmniWrist-III and the Quaternion joint mechanisms are modeled and analyzed for the said application. Finally, a detailed comparison of their workspace features is presented. The Quaternion joint mechanism emerges as a promising candidate from this study.

[1]  Hongzhao Liu,et al.  Type synthesis of 2T2R, 1T2R and 2R parallel mechanisms , 2013 .

[2]  Giorgio Metta,et al.  Comparison of Workspace Analysis for Different Spherical Parallel Mechanisms , 2018 .

[3]  Xin-Jun Liu,et al.  Type Synthesis of Parallel Mechanisms , 2014 .

[4]  Giorgio Metta,et al.  A new cost effective robot hand for the iCub humanoid , 2015, 2015 IEEE-RAS 15th International Conference on Humanoid Robots (Humanoids).

[5]  Marco Carricato,et al.  Synthesis and Singularity Analysis of N-UU Parallel Wrists: A Symmetric Space Approach , 2017 .

[6]  Lia Dolga,et al.  The structural synthesis of the parallel robots , 2011 .

[7]  Neil M. Bajaj,et al.  State of the Art in Artificial Wrists: A Review of Prosthetic and Robotic Wrist Design , 2019, IEEE Transactions on Robotics.

[8]  Nikolaos G. Tsagarakis,et al.  The Design of the iCub humanoid Robot , 2012, Int. J. Humanoid Robotics.

[9]  J. Sofka,et al.  Omni-Wrist III - a new generation of pointing devices. Part I. Laser beam steering devices - mathematical modeling , 2006, IEEE Transactions on Aerospace and Electronic Systems.

[10]  C. Gosselin,et al.  Advantages of the modified Euler angles in the design and control of PKMs , 2002 .

[11]  Giorgio Metta,et al.  An Evolutionary Approach for the Optimal Design of the iCub mk.3 Parallel Wrist , 2018, 2018 IEEE-RAS 18th International Conference on Humanoid Robots (Humanoids).

[12]  K. Farhang,et al.  Design of spherical 4R mechanisms : Function generation for the entire motion cycle , 1999 .

[13]  Giorgio Metta,et al.  Workspace Analysis and the Effect of Geometric Parameters for Parallel Mechanisms of the N-UU Class , 2018 .

[14]  Marco Carricato,et al.  Symmetric Subspace Motion Generators , 2018, IEEE Transactions on Robotics.

[15]  K. H. Hunt.  Constant-Velocity Shaft Couplings: A General Theory , 1973 .

[16]  Zexiang Li,et al.  Inversion Symmetry of the Euclidean Group: Theory and Application to Robot Kinematics , 2016, IEEE Transactions on Robotics.

[17]  Frank Kirchner,et al.  AILA - design of an autonomous mobile dual-arm robot , 2011, 2011 IEEE International Conference on Robotics and Automation.

[18]  Yong-Jae Kim,et al.  Anthropomorphic Low-Inertia High-Stiffness Manipulator for High-Speed Safe Interaction , 2017, IEEE Transactions on Robotics.

[19]  Albert Wang,et al.  Actuator design for high force proprioceptive control in fast legged locomotion , 2012, 2012 IEEE/RSJ International Conference on Intelligent Robots and Systems.

[20]  Daniel C. H. Yang,et al.  A New Zero-Dimension Robot Wrist: Design and Accessibility Analysis , 2001, Int. J. Robotics Res..

[21]  Hiroaki Ishida,et al.  Design of Large Motion Range and Heavy Duty 2-DOF Spherical Parallel Wrist Mechanism , 2013, J. Robotics Mechatronics.

[22]  Anne Kuefer.  Robot Evolution The Development Of Anthrobotics , 2016 .

[23]  Robert J. Wood,et al.  Design and control of a parallel linkage wrist for robotic microsurgery , 2015, 2015 IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS).

[24]  Shigeo Hirose,et al.  Study on ankle mechanism for walking robots: development of 2 d.o.f. coupled drive ankle mechanism with wide motion range , 2004, 2004 IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS) (IEEE Cat. No.04CH37566).

[25]  Jong-In Kim,et al.  Quaternion Joint: Dexterous 3-DOF Joint Representing Quaternion Motion for High-Speed Safe Interaction , 2018, 2018 IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS).

[26]  Jiyoung Kim,et al.  RoboRay hand: A highly backdrivable robotic hand with sensorless contact force measurements , 2014, 2014 IEEE International Conference on Robotics and Automation (ICRA).

[27]  Michael M. Stanisic,et al.  Symmetrically actuated double pointing systems: the basis of singularity-free robot wrists , 1990, IEEE Trans. Robotics Autom..

[28]  J. Kenneth Salisbury,et al.  Mechanical Design for Whole-Arm Manipulation , 1993 .

[29]  Atsuo Takanishi,et al.  New shank mechanism for humanoid robot mimicking human-like walking in horizontal and frontal plane , 2013, 2013 IEEE International Conference on Robotics and Automation.

[30]  Richard P. Paul,et al.  The Hamilton wrist: a four-revolute-joint spherical wrist without singularities , 1989, Proceedings, 1989 International Conference on Robotics and Automation.

[31]  Giorgio Metta,et al.  A parallel kinematic mechanism for the torso of a humanoid robot: Design, construction and validation , 2017, 2017 IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS).

[32]  M. Carricato.  Decoupled and Homokinetic Transmission of Rotational Motion via Constant-Velocity Joints in Closed-Chain Orientational Manipulators , 2009 .