Electron Beam Curing of Composite Positive Electrode for Li-Ion Battery

[1]  Shi Xue Dou,et al.  The effect of different binders on electrochemical properties of LiNi1/3Mn1/3Co1/3O2 cathode material in lithium ion batteries , 2013 .

[2]  Stefano Passerini,et al.  Performance of LiNi1/3Mn1/3Co1/3O2/graphite batteries based on aqueous binder , 2014 .

[3]  J. C. Burns,et al.  Introducing Symmetric Li-Ion Cells as a Tool to Study Cell Degradation Mechanisms , 2011 .

[4]  Claus Daniel,et al.  Prospects for reducing the processing cost of lithium ion batteries , 2015 .

[5]  S. Passerini,et al.  Investigations on cellulose-based high voltage composite cathodes for lithium ion batteries , 2011 .

[6]  Seong-Jin An,et al.  Evaluation Residual Moisture in Lithium-Ion Battery Electrodes and Its Effect on Electrode Performance , 2016 .

[7]  Young-Min Choi,et al.  Aqueous processing of natural graphite particulates for lithium-ion battery anodes and their electrochemical performance , 2005 .

[8]  Jae Hyun Kim,et al.  Electron beam modification of anode materials for high-rate lithium ion batteries , 2015 .

[9]  Koji Sekai,et al.  Surface treatment of carbon electrodes by electron beam irradiation , 2001 .

[10]  D. Guyomard,et al.  Design of Aqueous Processed Thick LiFePO4 Composite Electrodes for High-Energy Lithium Battery , 2009 .

[11]  Young-Min Choi,et al.  Effect of poly(acrylic acid) on adhesion strength and electrochemical performance of natural graphite negative electrode for lithium-ion batteries , 2006 .

[12]  L. Lei,et al.  Battery Recycling Technologies: Recycling Waste Lithium Ion Batteries with the Impact on the Environment In-View , 2013 .

[13]  Vincent A. Hackley,et al.  Effect of Carboxymethyl Cellulose on Aqueous Processing of Natural Graphite Negative Electrodes and their Electrochemical Performance for Lithium Batteries , 2005 .

[14]  Dichen Li,et al.  Low-energy electron beam cured tape placement for out-of-autoclave fabrication of advanced polymer composites , 2014 .

[15]  P. Moreau,et al.  Is LiFePO4 Stable in Water? Toward Greener Li–Ion Batteries , 2008 .

[16]  C. Decker,et al.  UV-Radiation curing of waterborne acrylate coatings , 2004 .

[17]  Claus Daniel,et al.  Materials processing for lithium-ion batteries , 2011 .

[18]  S. Passerini,et al.  Polyurethane Binder for Aqueous Processing of Li-Ion Battery Electrodes , 2015 .

[19]  Claus Daniel,et al.  Optimization of LiFePO4 nanoparticle suspensions with polyethyleneimine for aqueous processing. , 2012, Langmuir : the ACS journal of surfaces and colloids.