Reactive magnetron sputtering of uniform yttria-stabilized zirconia coatings in an industrial setup

[1]  P. Brault,et al.  Yttria - stabilized zirconia thin films deposited by pulsed-laser deposition and magnetron sputtering , 2011 .

[2]  M. Ferraris,et al.  Yttria-stabilized zirconia thin film electrolyte produced by RF sputtering for solid oxide fuel cell applications , 2010 .

[3]  Michael C. Tucker,et al.  Progress in metal-supported solid oxide fuel cells: A review , 2010 .

[4]  N. Pryds,et al.  Effects of dopant concentration and impurities on the conductivity of magnetron-sputtered nanocrystalline yttria-stabilized zirconia , 2010 .

[5]  N. Pryds,et al.  Low‐Temperature Superionic Conductivity in Strained Yttria‐Stabilized Zirconia , 2010 .

[6]  T. Kubart,et al.  ERD analysis and modification of TiO2 thin films with heavy ions , 2010 .

[7]  N. Bonanos,et al.  Ionic conductivity and thermal stability of magnetron-sputtered nanocrystalline yttria-stabilized zirconia , 2009 .

[8]  J. Hertz,et al.  Opportunities and Challenges in Materials Development for Thin Film Solid Oxide Fuel Cells , 2008 .

[9]  L. Gauckler,et al.  Thin films for micro solid oxide fuel cells , 2007 .

[10]  Fritz B. Prinz,et al.  Atomic layer deposition of yttria-stabilized zirconia for solid oxide fuel cells , 2007 .

[11]  D. Depla,et al.  Biaxial alignment in sputter deposited thin films , 2006 .

[12]  S. Ramanathan,et al.  High temperature conductivity studies on nanoscale yttria-doped zirconia thin films and size effects , 2006 .

[13]  P. Briois,et al.  A comparison of electrical properties of sputter-deposited electrolyte coatings dedicated to intermediate temperature solid oxide fuel cells , 2006 .

[14]  Xiao-Dong Zhou,et al.  Application of vacuum deposition methods to solid oxide fuel cells , 2006 .

[15]  D. J. Christie,et al.  Control of reactive sputtering processes , 2005 .

[16]  E. A. Payzant,et al.  Processing of YSZ thin films on dense and porous substrates , 2005 .

[17]  O. Lebedev,et al.  Influence of the Ar/O2 ratio on the growth and biaxial alignment of yttria stabilized zirconia layers during reactive unbalanced magnetron sputtering , 2005 .

[18]  O. Lebedev,et al.  Mechanism of preferential orientation in sputter deposited titanium nitride and yttria-stabilized zirconia layers , 2005 .

[19]  Christopher M. Rouleau,et al.  Nanoscale effects on the ionic conductivity in highly textured YSZ thin films , 2005 .

[20]  Lars Hultman,et al.  Microstructural evolution during film growth , 2003 .

[21]  F. Tietz,et al.  DC Sputtering of yttria-stabilised zirconia films for solid oxide fuel cell applications , 2001 .

[22]  Carsten Korte,et al.  Electrochemical blackening of yttria-stabilized zirconia – morphological instability of the moving reaction front , 1999 .

[23]  C. Petersson,et al.  Quantitative mass and energy dispersive elastic recoil spectrometry: Resolution and efficiency considerations , 1987 .