Room and elevated temperature tensile and fatigue behaviour of additively manufactured Hastelloy X

[1]  T. Niendorf,et al.  Fatigue crack growth in additively manufactured Hastelloy X - Influences of crack orientation and post-fabrication treatments , 2022, Materials Science and Engineering: A.

[2]  M. Badrossamay,et al.  Investigation of microstructure-tensile behavior relationship in Hastelloy X Ni-based superalloy processed by laser powder-bed fusion: Insights into the elevated temperature ductility loss , 2021, Materials Science and Engineering: A.

[3]  E. Toyserkani,et al.  On the effect of laser powder-bed fusion process parameters on quasi-static and fatigue behaviour of Hastelloy X: A microstructure/defect interaction study , 2021 .

[4]  A. Huang,et al.  Microstructure, mechanical behaviour and strengthening mechanisms in Hastelloy X manufactured by electron beam and laser beam powder bed fusion , 2020 .

[5]  André J. Souza,et al.  Effect of cutting conditions on surface roughness in finish turning Hastelloy® X superalloy , 2020 .

[6]  M. E. Kassner,et al.  High-temperature tensile and high cycle fatigue properties of inconel 625 alloy manufactured by laser powder bed fusion , 2020 .

[7]  S. Dryepondt,et al.  High temperature air oxidation behavior of Hastelloy X processed by Electron Beam Melting (EBM) and Selective Laser Melting (SLM) , 2020 .

[8]  M. Terner,et al.  Heat treatments design for superior high-temperature tensile properties of Alloy 625 produced by selective laser melting , 2020, Materials Science and Engineering: A.

[9]  P. Withers,et al.  The effect of manufacturing defects on the fatigue life of selective laser melted Ti-6Al-4V structures , 2020 .

[10]  M. Brochu,et al.  Microstructure and mechanical properties at room and elevated temperature of crack-free Hastelloy X fabricated by laser powder bed fusion , 2020 .

[11]  J. Kruth,et al.  Effect of temperature on the microstructure and tensile properties of micro-crack free hastelloy X produced by selective laser melting , 2020, Additive Manufacturing.

[12]  S. Turenne,et al.  Microstructure and mechanical properties of laser powder bed-fused IN625 alloy , 2019 .

[13]  R. Setchi,et al.  Additive manufacturing of high-strength crack-free Ni-based Hastelloy X superalloy , 2019, Additive Manufacturing.

[14]  D. Kong,et al.  Effect of Process Parameters on the Mechanical Properties of Hastelloy X Alloy Fabricated by Selective Laser Melting , 2019, Journal of Materials Engineering and Performance.

[15]  J. Moverare,et al.  Microstructure tailoring in Electron Beam Powder Bed Fusion additive manufacturing and its potential consequences , 2019, Results in Materials.

[16]  J. Humbeeck,et al.  Microstructure and mechanical properties of Hastelloy X produced by HP-SLM (high power selective laser melting) , 2019, Materials & Design (1980-2015).

[17]  S. Biamino,et al.  Microstructural Evolution of Post-Processed Hastelloy X Alloy Fabricated by Laser Powder Bed Fusion , 2019, Materials.

[18]  H. Miura,et al.  Disappearance of Strengthened Micro Texture of Modified 9Cr-1Mo Steel Caused by Stress-Induced Acceleration of Atomic Diffusion at Elevated Temperatures , 2018, Volume 9: Mechanics of Solids, Structures, and Fluids.

[19]  R. Setchi,et al.  Laser powder bed fusion of Hastelloy X: Effects of hot isostatic pressing and the hot cracking mechanism , 2018, Materials Science and Engineering: A.

[20]  M. Brochu,et al.  Fabrication of Crack-Free Nickel-Based Superalloy Considered Non-Weldable during Laser Powder Bed Fusion , 2018, Materials.

[21]  P. Rometsch,et al.  Columnar to equiaxed transition in Al-Mg(-Sc)-Zr alloys produced by selective laser melting , 2018 .

[22]  S. Biamino,et al.  Study of the Microstructure and Cracking Mechanisms of Hastelloy X Produced by Laser Powder Bed Fusion , 2018, Materials.

[23]  Frank Walther,et al.  Comparison of Microstructure and Mechanical Properties of Scalmalloy® Produced by Selective Laser Melting and Laser Metal Deposition , 2017, Materials.

[24]  W. Xiong,et al.  Grain Structure Control of Additively Manufactured Metallic Materials , 2017, Materials.

[25]  P. Prangnell,et al.  The Influence of Porosity on Fatigue Crack Initiation in Additively Manufactured Titanium Components , 2017, Scientific Reports.

[26]  D. Tomus,et al.  Effect of minor alloying elements on crack-formation characteristics of Hastelloy-X manufactured by selective laser melting , 2017 .

[27]  M. Jahazi,et al.  Structure, Texture and Phases in 3D Printed IN718 Alloy Subjected to Homogenization and HIP Treatments , 2017 .

[28]  Yali Li,et al.  Effects of Hot Isostatic Pressing on Microstructure and Mechanical Properties of Hastelloy X Samples Produced by Selective Laser Melting , 2017 .

[29]  Andrey Koptyug,et al.  Additive manufacturing of ITER first wall panel parts by two approaches: Selective laser melting and electron beam melting , 2017 .

[30]  Ryan R. Dehoff,et al.  Strategy for Texture Management in Metals Additive Manufacturing , 2017 .

[31]  E. V. Borisov,et al.  Functionally graded Inconel 718 processed by additive manufacturing: Crystallographic texture, anisotropy of microstructure and mechanical properties , 2017 .

[32]  A. Chiba,et al.  Effects of post-processing on cyclic fatigue response of a titanium alloy additively manufactured by electron beam melting , 2017 .

[33]  Robert F. Singer,et al.  Grain structure evolution in Inconel 718 during selective electron beam melting , 2016 .

[34]  Xinhua Wu,et al.  Influence of post heat treatments on anisotropy of mechanical behaviour and microstructure of Hastelloy-X parts produced by selective laser melting , 2016 .

[35]  N. Raghavan,et al.  Microstructure Development in Electron Beam-Melted Inconel 718 and Associated Tensile Properties , 2016 .

[36]  A. Andrade-Campos,et al.  Modelling the Portevin-Le Chatelier effects in aluminium alloys: a review , 2015 .

[37]  I. Todd,et al.  Reduction of micro-cracking in nickel superalloys processed by Selective Laser Melting: A fundamental alloy design approach , 2015 .

[38]  E. Sugawara,et al.  Properties of AdeABC and AdeIJK Efflux Systems of Acinetobacter baumannii Compared with Those of the AcrAB-TolC System of Escherichia coli , 2014, Antimicrobial Agents and Chemotherapy.

[39]  J. Sieniawski,et al.  Modeling of Directional Solidification of Columnar Grain Structure in CMSX-4 Nickel-Based Superalloy Castings , 2014, Journal of Materials Engineering and Performance.

[40]  J. Moverare,et al.  Crystallographic Orientation Influence on the Serrated Yielding Behavior of a Single-Crystal Superalloy , 2013, Materials.

[41]  Xishan Xie,et al.  Influence of thermal exposure on the precipitates and mechanical properties of a newly developed Ni–21Cr–17Mo alloy , 2013 .

[42]  H. Fu,et al.  Effect of thermal exposure on the stability of carbides in Ni–Cr–W based superalloy , 2011 .

[43]  Vojislav Petrovic,et al.  Additive layered manufacturing: sectors of industrial application shown through case studies , 2011 .

[44]  X. H. Wu,et al.  On direct laser deposited Hastelloy X: dimension, surface finish, microstructure and mechanical properties , 2011 .

[45]  K. B. S. Rao,et al.  On dual-slope linear cyclic hardening of Hastelloy X , 2010 .

[46]  J. Kruth,et al.  A study of the microstructural evolution during selective laser melting of Ti–6Al–4V , 2010 .

[47]  I. Kim,et al.  Effects of temperature and strain range on fatigue cracking behavior in Hastelloy X , 2008 .

[48]  A. Todoroki,et al.  Ultra-high-cycle fatigue properties and fracture mechanism of modified 2.25Cr-1Mo steel at elevated temperatures , 2006 .

[49]  T. Pollock,et al.  Nickel-Based Superalloys for Advanced Turbine Engines: Chemistry, Microstructure and Properties , 2006 .

[50]  N. Hansen,et al.  Hall–Petch relation and boundary strengthening , 2004 .

[51]  V. Ravikumar,et al.  Phase precipitation and time–temperature-transformation diagram of Hastelloy X , 2000 .

[52]  Z. M. Wang,et al.  The machinability of nickel-based alloys: a review , 1999 .

[53]  U. F. Kocks,et al.  New observations on the mechanisms of dynamic strain aging and of jerky flow , 1979 .

[54]  M. E. Shank,et al.  The development of columnar grain and single crystal high temperature materials through directional solidification , 1970 .

[55]  R. Singer,et al.  Metal injection molding (MIM) of nickel-base superalloys , 2019, Handbook of Metal Injection Molding.

[56]  Xiao-feng Sun,et al.  Effects of grain size on the high-cycle fatigue behavior of IN792 superalloy , 2015 .

[57]  Robert F. Singer,et al.  Tailoring the grain structure of IN718 during selective electron beam melting , 2014 .

[58]  J. Moverare,et al.  DEFORMATION AND DAMAGE MECHANISMS DURING THERMOMECHANICAL FATIGUE OF A SINGLE-CRYSTAL SUPERALLOY IN THE < 001 > AND < 011 > DIRECTIONS , 2012 .

[59]  Fude Wang.  Mechanical property study on rapid additive layer manufacture Hastelloy® X alloy by selective laser melting technology , 2012 .

[60]  S. Özbilen.  Satellite formation mechanism in gas atomised powders , 1999 .

[61]  A. Huang,et al.  Effect of solution heat treatment and hot isostatic pressing on the microstructure and mechanical properties of Hastelloy X manufactured by electron beam powder bed fusion , 2022 .