论文信息 - The Modelling of Electrohydraulic Control Valves and its Influence on the Design of Electrohydraulic Drives

The Modelling of Electrohydraulic Control Valves and its Influence on the Design of Electrohydraulic Drives

The modelling of the control valve is shown to be a factor of prime importance in the design of electrohydraulic systems. The process required to model a commercially available valve is described in detail, with equal attention to the production of the experimental data and the identification of the model parameters. The quality of the decisions made in the construction of a model is shown to be most critically evaluated when derivative feedback loops are employed. A study of a system with negative transient acceleration feedback is included to illustrate the effectiveness of a third-order model. It is demonstrated that the use of a digital computer is essential for this type of system design.

A. de Pennington | J. J. ‘t Mannetje | R. Bell

[1] A. W. J. Griffin,et al. Transfer Functions from Sampled Impulse Responses , 1970 .

[2] Cecil L. Smith,et al. APPLICATION OF SIMULATION TO THE GENERALIZED OPTIMIZATION OF PROCESS CONTROL SYSTEMS. , 1969 .

[3] Transfer-Function Identification Using a Complex Curve-Fitting Technique: , 1973 .

[4] P. Payne. An improved technique for transfer function synthesis from frequency response data , 1970 .

[5] C. Ashley,et al. Frequency Response of an Electro-Hydraulic Vibrator with Inertial Load , 1966 .

[6] S. C. Tsai,et al. Detailed Analysis of a Two-Stage Four-Way Electrohydraulic Flow-Control Valve: , 1969 .

[7] C. Sanathanan,et al. Transfer function synthesis as a ratio of two complex polynomials , 1963 .

[8] R. T. Griffiths,et al. Hydraulic servo systems: analysis and design; , 1969 .

[9] E. C. Levy. Complex-curve fitting , 1959, IRE Transactions on Automatic Control.

[10] R. Bell,et al. Active Compensation of Lightly Damped Electrohydraulic Cylinder Drives Using Derivative Signals , 1969 .

[11] A. de Pennington,et al. The Improvement of the Accuracy of Electrohydraulic Cylinder Drives for NC Machine Tools by the Use of Active Feedback Compensation , 1972 .