Issues in Numerical Modeling of Phase Transformations in Welded Joint

Abstract This work concerns issues of mathematical modelling of phase transformations in steels during a high-speed high-power heat source welding processes. The analysis of the influence of thermal cycle parameters such as: heating rate, cooling rate and the maximal heating temperature on the kinetics of phase transformations during heating and cooling is performed. The verification of classical mathematical and numerical models of phase transformations is presented in relation to advanced welding methods using a high-speed high-power heat source on the basis of data found in the literature and experimental research.

[1]  J. Słania.  Influence of phase transformations in the temperature rangers of 1250-1000C and 650-350C on the ferrite content in austenitic welds made with T 23 12 LRM3 tubular eletrode , 2005 .

[2]  Milan Sága,et al.  Contribution to Modal and Spectral Interval Finite Element Analysis , 2011 .

[3]  Tomasz Domański,et al.  Numerical Analysis of Deformations in Sheets Made of X5CRNI18-10 Steel Welded by a Hybrid Laser-arc Heat Source☆ , 2016 .

[4]  P. Papanikos,et al.  Numerical simulation of the laser welding process in butt-joint specimens , 2003 .

[5]  P. Maropoulos,et al.  Effects of welding speed, energy input and heat source distribution on temperature variations in butt joint welding , 2005 .

[6]  Wiesława Piekarska,et al.  Modelling of laser beam heat source based on experimental research of Yb:YAG laser power distribution , 2015 .

[7]  Milan Sága,et al.  Chosen Numerical Algorithms for Interval Finite Element Analysis , 2014 .

[8]  Tomasz Domański,et al.  Determination of the Final Microstructure during Processing Carbon Steel Hardening , 2016 .

[9]  Marián Handrik,et al.  Fatigue Resistance of Reinforcing Steel Bars , 2016 .

[10]  D. P. Koistinen,et al.  A general equation prescribing the extent of the austenite-martensite transformation in pure iron-carbon alloys and plain carbon steels , 1959 .

[11]  Hirohata Mikihito,et al.  Welding Distortion and Residual Stress Generated by Laser Beam Welding and Laser-Arc Hybrid Welding for High Strength Steel , 2012 .

[12]  Petr Ferfecki,et al.  Identification of material damping of a carbon composite bar and study of its effect on attenuation of its transient lateral vibrations , 2015 .

[13]  Milan Sága,et al.  Design and Application of Multi-software Platform for Solving of Mechanical Multi-body System Problems , 2011 .