Effect of a weak fiber interface coating in ZrB2 reinforced with long SiC fibers

[1]  Junlei Li,et al.  Toughening effect of short carbon fibers in the ZrB2–ZrSi2 ceramic composites , 2015 .

[2]  C. Leslie,et al.  Development and Characterization of Continuous SiC Fiber-Reinforced HfB2-Based UHTC Matrix Composites Using Polymer Impregnation and Slurry Infiltration Techniques , 2015 .

[3]  D. Sciti,et al.  Tyranno SA3 fiber–ZrB2 composites. Part II: Mechanical properties , 2015 .

[4]  V. Medri,et al.  From random chopped to oriented continuous SiC fibers–ZrB2 composites , 2014 .

[5]  Bala Vaidhyanathan,et al.  UHTC composites for hypersonic applications , 2014 .

[6]  William G. Fahrenholtz,et al.  Ultra-high temperature ceramics : materials for extreme environment applications , 2014 .

[7]  D. Sciti,et al.  Are short Hi-Nicalon SiC fibers a secondary or a toughening phase for ultra-high temperature ceramics? , 2014 .

[8]  I. Low.  Advances in ceramic matrix composites , 2014 .

[9]  B. Lai.  Processing and properties of ZrB2-ZrSi2 matrix composites reinforced with continuous SiC fiber , 2013 .

[10]  D. Sciti,et al.  Processing, sintering and oxidation behavior of SiC fibers reinforced ZrB2 composites , 2012 .

[11]  A. Jankowiak,et al.  Potential and Perspectives for Oxide/Oxide Composites. , 2011 .

[12]  R. Ritchie.  The conflicts between strength and toughness. , 2011, Nature materials.

[13]  D. Sciti,et al.  Oxidation of ZrB2 Ceramics Containing SiC as Particles, Whiskers, or Short Fibers , 2011 .

[14]  Bjørn Clausen,et al.  Measurement of thermal residual stresses in ZrB2–SiC composites , 2011 .

[15]  H. Inui,et al.  Anisotropic elastic constants and thermal expansivities in monocrystal CrB2, TiB2, and ZrB2 , 2010 .

[16]  Dipankar Ghosh,et al.  Measurement of scratch-induced residual stress within SiC grains in ZrB2–SiC composite using micro-Raman spectroscopy , 2008 .

[17]  William G. Fahrenholtz,et al.  Refractory Diborides of Zirconium and Hafnium , 2007 .

[18]  E. Opila,et al.  UHTCs: Ultra-High Temperature Ceramic Materials for Extreme Environment Applications , 2007 .

[19]  T. Ishikawa.  Advances in inorganic fibers , 2005 .

[20]  D. Van Wie,et al.  The hypersonic environment: Required operating conditions and design challenges , 2004 .

[21]  C. Labrugère,et al.  Characterization of nearly stoichiometric SiC ceramic fibres , 2001 .

[22]  T. Langdon,et al.  The toughening and strengthening of ceramic materials through discontinuous reinforcement , 1994 .

[23]  M. Taya,et al.  Toughening of a particulate-reinforced/ceramic-matrix composite. Technical report , 1989 .

[24]  D. Munz,et al.  Fracture toughness calculation from maximum load in four point bend tests of chevron notch specimens , 1980 .

[25]  A. Atkins.  Intermittent bonding for high toughness/ high strength composites , 1975 .

[26]  A. Kelly,et al.  Tensile properties of fibre-reinforced metals: Copper/tungsten and copper/molybdenum , 1965 .

[27]  J. E. Gordon,et al.  A mechanism for the control of crack propagation in all-brittle systems , 1964, Proceedings of the Royal Society of London. Series A. Mathematical and Physical Sciences.