Effect of SiC whiskers on the mechanical and ablation performances of Cu modified C/C composite

[1]  Wei Sun,et al.  Novel nitrogen-doped hafnium carbides for advanced ablation resistance up to 3273 K , 2021 .

[2]  Wei Sun,et al.  Thermoablative behaviors of designable hafnium carbonitride integrated with lattice of tungsten upon 3273K , 2021 .

[3]  Zhongya Zhang,et al.  Ablative properties of laminated ZrB2-SiC ceramic modified by SiC whisker in oxyacetylene environment , 2021 .

[4]  L. K. Foong,et al.  Effect of SiC whisker on densification and mechanical properties of hot-pressed TiC-based composites , 2020 .

[5]  Lei Liu,et al.  Particle erosion of C/C-SiC composites with different Al addition in reactive melt infiltrated Si , 2020, Journal of Central South University.

[6]  Yang Haotian,et al.  Microstructure and mechanical property of SiC whisker coating modified C/C composite/Ti2AlNb alloy dissimilar joints prepared by transient liquid phase diffusion bonding , 2020 .

[7]  Gerbrand Ceder,et al.  A map of the inorganic ternary metal nitrides , 2018, Nature Materials.

[8]  Xiaohui Wang,et al.  Mullite-bonded SiC-whisker-reinforced SiC matrix composites: Preparation, characterization, and toughening mechanisms , 2018, Journal of the European Ceramic Society.

[9]  Jinyong Zhang,et al.  High-entropy carbide: A novel class of multicomponent ceramics , 2018, Ceramics International.

[10]  M. Naderi,et al.  Ablation mechanism of ZrB2-SiC coating for SiC-coated graphite under an oxyacetylene flame , 2018, Surface and Coatings Technology.

[11]  Gan Huang,et al.  Experimental investigation of self-pumping internal transpiration cooling , 2018, International Journal of Heat and Mass Transfer.

[12]  Lai-fei Cheng,et al.  Improved fracture toughness of laminated ZrB2-SiC-MoSi2 ceramics using SiC whisker , 2018, Ceramics International.

[13]  M. Naderi,et al.  The ablation behavior of ZrB2-SiC coating prepared by shrouded plasma spray on SiC-coated graphite , 2018 .

[14]  Ling-jun Guo,et al.  Microstructure and ablation mechanism of SiC-ZrC-Al2O3 coating for SiC coated C/C composites under oxyacetylene torch test , 2018 .

[15]  K. Zangeneh-madar,et al.  Transpiration cooling during ultra-high temperature erosion , 2018 .

[16]  Hejun Li,et al.  Ablation resistance of supersonic-atmosphere-plasma-spraying ZrC coating doped with ZrO2 for SiC-coated carbon/carbon composites , 2017 .

[17]  Jianfeng Huang,et al.  Microstructures and ablation properties of Cf/C-SiC-MoSi2 composites: Influence of the SiC:MoSi2 mass ratio , 2016 .

[18]  Yu Xiaoyu,et al.  Thermal cycling behavior and oxidation resistance of SiC whisker-toughened-mullite/SiC coated carbon/carbon composites in burner rig tests , 2016 .

[19]  G. Hilmas,et al.  Effect of a weak fiber interface coating in ZrB2 reinforced with long SiC fibers , 2015 .

[20]  Axel van de Walle,et al.  Prediction of the material with highest known melting point from ab initio molecular dynamics calculations , 2015 .

[21]  S. Ghosh,et al.  Role of SiC nanowire coating on oxidation behavior of carbon fibers: Kinetic and thermodynamic study , 2014 .

[22]  Qizhong Huang,et al.  Ablation behavior of ZrC–SiC coated C/C–ZrC–SiC composites prepared by precursor infiltration pyrolysis combined with reactive melt infiltration , 2014 .

[23]  Qizhong Huang,et al.  Microstructure and ablation behavior of SiC coated C/C–SiC–ZrC composites prepared by a hybrid infiltration process , 2013 .

[24]  Xiaohong Shi,et al.  Effect of Cu particles on the ablation properties of C/C composites , 2013 .

[25]  Hejun Li,et al.  Microstructures and ablation properties of C/C−SiC−ZrC composites prepared using C/C skeletons with various densities , 2013 .

[26]  Xiaohong Shi,et al.  Ablation in different heat fluxes of C/C composites modified by ZrB2–ZrC and ZrB2–ZrC–SiC particles , 2013 .

[27]  Honghe Ma,et al.  Oxidation of Cu(II)-EDTA in supercritical water—Experimental results and modeling , 2013 .

[28]  Yumin Zhang,et al.  Fabrication and characterization of SiC whisker reinforced reaction bonded SiC composite , 2013 .

[29]  R. Savino,et al.  Dynamic oxidation of ultra-high temperature ZrB2–SiC under high enthalpy supersonic flows , 2011 .

[30]  Jiecai Han,et al.  Preparation and thermal ablation behavior of titanium diboride/(copper, nickel) C4 material , 2007 .

[31]  G. Thollet,et al.  Influence of SiC whisker morphology and nature of SiC/Al2O3 interface on thermomechanical properties of SiC reinforced Al2O3 composites , 2005 .

[32]  Ö. Gülder,et al.  The flame preheating effect on numerical modelling of soot formation in a two-dimensional laminar ethylene–air diffusion flame , 2002 .

[33]  H. H. Lee,et al.  Capillary Force Lithography , 2001 .

[34]  B. Hopkins,et al.  Oxidation mechanisms of niobium, tantalum, molybdenum and tungsten , 1960 .