The reflection of the fundamental torsional mode from pit clusters in pipes

Abstract Localised corrosion is a major problem in the oil and gas industry, and is difficult to detect using conventional inspection methods. This paper studies the reflection coefficient (RC) from pit clusters using the fundamental torsional guided wave. The clusters consist of a random number of pits that have developed randomly in size and depth following certain growth rules. The relationship between maximum pit depth and maximum RC is assessed for a large number clusters. Problematic cases where low maximum RCs are obtained from pit clusters with deep maximum pit depth are investigated in detail. Results show that the majority of such clusters consist of a single small and deep pit, with otherwise shallow attack only; such corrosion morphologies are unlikely to occur in practice. With more realistic pit cluster morphologies, where the pit clusters are part of a larger, wider corrosion attack, fewer cases with deep maximum pit depth result in a low maximum RC. The main findings are validated experimentally.

[1]  P. Cawley,et al.  The interaction of Lamb waves with defects , 1992, IEEE Transactions on Ultrasonics, Ferroelectrics and Frequency Control.

[2]  H. Arai,et al.  Effect of pitting corrosion on local strength of hold frames of bulk carriers (1st report) , 2004 .

[3]  Peter Cawley,et al.  The reflection of guided waves from simple supports in pipes. , 2011, The Journal of the Acoustical Society of America.

[4]  Peter W. Tse,et al.  Experimental investigation of reflection in guided wave-based inspection for the characterization of pipeline defects , 2010 .

[5]  Wenhao Zhu,et al.  An FEM Simulation for Guided Elastic Wave Generation and Reflection in Hollow Cylinders With Corrosion Defects , 2002 .

[6]  Peter Cawley,et al.  The reflection of the fundamental torsional guided wave from multiple circular holes in pipes , 2011 .

[7]  Jon Kvarekval.  Morphology Of Localised Corrosion Attacks In Sour Environments , 2007 .

[8]  Peter Cawley,et al.  THE REFLECTION OF GUIDED WAVES FROM NOTCHES IN PIPES: A GUIDE FOR INTERPRETING CORROSION MEASUREMENTS , 2004 .

[9]  Joseph L. Rose,et al.  A Baseline and Vision of Ultrasonic Guided Wave Inspection Potential , 2002 .

[10]  M. Kermani,et al.  Carbon Dioxide Corrosion in Oil and Gas Production—A Compendium , 2003 .

[11]  Kip Sprague,et al.  A Review of Monitoring and Inspection Techniques for CO2 and H2S Corrosion in Oil & Gas Production Facilities: Location, Location, Location , 2006 .

[12]  H. Strehblow,et al.  THE DETERMINATION OF THE SHAPE OF DEVELOPING CORROSION PITS , 1994 .

[13]  Robert E. Melchers,et al.  Pitting Corrosion of Mild Steel in Marine Immersion Environment—Part 1: Maximum Pit Depth , 2004 .

[14]  A. G. Roosenbrand,et al.  The variation of the reflection coefficient of extensional guided waves in pipes from defects as a function of defect depth, axial extent, circumferential extent and frequency , 2002 .

[15]  M. Lowe,et al.  Scattering of the fundamental shear horizontal guided wave by a part-thickness crack in an isotropic plate. , 2008, The Journal of the Acoustical Society of America.

[16]  A. G. Roosenbrand,et al.  The reflection of the fundamental torsional mode from cracks and notches in pipes. , 2003, The Journal of the Acoustical Society of America.

[17]  David G. Reid,et al.  A Case History , 1997 .

[18]  M J S Lowe,et al.  Scattering of the fundamental torsional mode at an axial crack in a pipe. , 2010, The Journal of the Acoustical Society of America.

[19]  Rolf Nyborg.  Initiation and Growth of Mesa Corrosion Attack During CO2 Corrosion of Carbon Steel , 1998 .

[20]  J. Ditri.  Utilization of guided elastic waves for the characterization of circumferential cracks in hollow cylinders , 1994 .

[21]  A. L. Horovistiz,et al.  An image processing method for morphology characterization and pitting corrosion evaluation , 2002 .

[22]  Eytan Domany,et al.  Multiple scattering formalism: Application to scattering by two spheres , 1984 .

[23]  P Cawley,et al.  The scattering of the fundamental torsional mode from axi-symmetric defects with varying depth profile in pipes. , 2010, The Journal of the Acoustical Society of America.

[24]  Robert E. Melchers,et al.  Extreme value statistics and long-term marine pitting corrosion of steel , 2008 .

[25]  N. Popplewell,et al.  Scattering of Guided Waves by Circumferential Cracks in Steel Pipes , 2001 .

[26]  Frank J. Rizzo,et al.  Elastic scatterer interaction via generalized Born series and far-field approximations , 1993 .

[27]  T. Grahn.  Lamb wave scattering from a circular partly through-thickness hole in a plate , 2003 .

[28]  Peter Cawley,et al.  The choice of torsional or longitudinal excitation in guided wave pipe inspection , 2009 .

[29]  M. Lowe,et al.  Defect detection in pipes using guided waves , 1998 .

[30]  P Cawley,et al.  Low-frequency pulse echo reflection of the fundamental shear horizontal mode from part-thickness elliptical defects in plates. , 2010, The Journal of the Acoustical Society of America.

[31]  Christophe Bacon,et al.  Finite element modeling of torsional wave modes along pipes with absorbing materials , 2006 .

[32]  M. Drozdz.  Efficient finite element modelling of ultrasound waves in elastic media , 2008 .

[33]  R. Revie,et al.  Model to Predict Internal Pitting Corrosion of Oil and Gas Pipelines , 2010 .

[34]  Peter Cawley,et al.  The excitation of Lamb waves in pipes using dry-coupled piezoelectric transducers , 1996 .

[35]  F. Caleyo,et al.  Stochastic modeling of pitting corrosion: A new model for initiation and growth of multiple corrosion pits , 2007 .

[36]  Robert E. Melchers,et al.  Probabilistic Models for Corrosion in Structural Reliability Assessment—Part 2: Models Based on Mechanics , 2003 .