Analysis of an electromechanical battery for rural electrification in sub-Saharan Africa

This paper presents the thermal and structural analysis of an electromechanical battery energy storage system designed to enhance rural electrification in sub-Saharan Africa. The system consists of a flywheel rotor, an electrical machine, bearings and a containment structure. The flywheel rotor was constructed from E-glass fiber, the machine from imported NdFeB magnets and commercial energy efficient bearings. With the exception of the power electronics and magnets, local materials were used for the manufacture of the flywheel system. The system was designed to operate between 8,000 rpm to 25,000 rpm with a rated storage capacity of 300Wh. Numerical stress analysis was performed during the design stage to ensure that the maximum tensile strength is not exceeded. A lumped parameter thermal model was used to estimate the temperature distribution to ensure safe operating conditions of the flywheel system and environment. The results of both analyses are presented.

[1]  Anthony Kelly,et al.  Comprehensive composite materials , 1999 .

[2]  Jacek F. Gieras,et al.  Axial Flux Permanent Magnet Brushless Machines , 2005 .

[3]  David Johnson.  Design considerations and implementation of an electromechanical battery system , 2007 .

[4]  T. Chou,et al.  Optimization of composite flywheel design , 1977 .

[5]  Yasunori Suzuki,et al.  Novel applications of the flywheel energy storage system , 2005 .

[6]  A. Andersson,et al.  Thermal analysis of a high-speed generator , 2003, 38th IAS Annual Meeting on Conference Record of the Industry Applications Conference, 2003..

[7]  J. Hanks,et al.  Spacecraft energy storage systems , 1998 .

[8]  Liping Zheng,et al.  Thermal Performance Evaluation of a High-Speed Flywheel Energy Storage System , 2007, IECON 2007 - 33rd Annual Conference of the IEEE Industrial Electronics Society.

[9]  R. F. Post,et al.  A high-efficiency electromechanical battery , 1993, Proc. IEEE.

[10]  J. E. Vrancik,et al.  Prediction of windage power loss in alternators , 1968 .

[11]  Richard M. Bird,et al.  Charging for Public Services: A New Look at an Old Idea , 1978 .

[12]  F. Sahin.  Design and development of a high-speed axial-flux permanent-magnet machine , 2001 .

[13]  J. Saari.  Thermal analysis of high-speed induction machines , 1998 .

[14]  A.J.A. Vandenput,et al.  Design, development and testing of a high-speed axial-flux permanent-magnet machine , 2001, Conference Record of the 2001 IEEE Industry Applications Conference. 36th IAS Annual Meeting (Cat. No.01CH37248).