Research on harmonic compensation for flux and current of permanent magnet synchronous motor

High order harmonic flux and current of permanent magnet synchronous motor (PMSM) are generated by the distortion of air-gap magnetic field and the nonlinear characteristics of inverter, resulting in the ripple of electromagnetic torque. In this paper, a novel harmonic compensation algorithm was proposed to solve this problem. Based on the harmonic model of the PMSM, harmonic voltage is injected to reduce harmonic components of the motor flux and current. By extraction of harmonic flux/current and injection of harmonic voltage in real-time, high-order harmonics of flux generated by the distortion of air-gap magnetic field and the nonlinear characteristics of inverter is counteracted. Thereby, distortion of motor current is reduced. The effectiveness of the algorithm is validated by simulation and experimentation.

[1]  K. Uezato,et al.  An adaptive dead-time compensation strategy for voltage source inverter fed motor drives , 2005, IEEE Transactions on Power Electronics.

[2]  Yong-Kai Lin,et al.  Dead-Time Elimination of PWM-Controlled Inverter/Converter Without Separate Power Sources for Current Polarity Detection Circuit , 2009, IEEE Transactions on Industrial Electronics.

[3]  G. A. Putrus,et al.  Analysis of harmonic transfer in an AC excited generator including speed ripple , 2002, IEEE 2002 28th Annual Conference of the Industrial Electronics Society. IECON 02.

[4]  Wang Jiang.  ADAPTIVE VARIABLE STRUCTURE CONTROL OF PMSM SYSTEM BASED ON INVERTER DEAD-TIME , 2001 .

[5]  D. Schlegel,et al.  Effects of parasitics on the control of voltage source inverters , 2003 .

[6]  Nanyang Avenue,et al.  Analysis of Flux Distribution and Core Losses in Interior Permanent Magnet Motor , 1999 .

[7]  Nguyen Xuan Bac,et al.  A sliding mode controller for induction motor fed with three -level inverter , 2009, 2009 International Conference on Information and Automation.

[8]  Geun-Ho Lee,et al.  Torque Ripple Reduction of Interior Permanent Magnet Synchronous Motor Using Harmonic Injected Current , 2008, IEEE Transactions on Magnetics.

[9]  Wootaik Lee,et al.  Effective Dead-Time Compensation Using a Simple Vectorial Disturbance Estimator in PMSM Drives , 2010, IEEE Transactions on Industrial Electronics.

[10]  Liao Yong.  Model of Permanent Magnet Synchronous Motor Considering Saturation and Rotor Flux Harmonics , 2011 .

[11]  Meng Ming.  μ-MODIFICATION VARIABLE STRUCTURE CONTROL OF PMSM SYSTEM BASED ON INVERTER DEAD-TIME , 2003 .

[12]  Yen-Shin Lai,et al.  Dead-time elimination of pwm-controlled inverter/converter without separate power sources for current polarity detection circuit , 2008, 2008 IEEE International Conference on Sustainable Energy Technologies.

[13]  T.M. Jahns,et al.  Torque Ripple Reduction in Interior Permanent Magnet Synchronous Machines Using the Principle of Mutual Harmonics Exclusion , 2007, 2007 IEEE Industry Applications Annual Meeting.

[14]  Xi Xiao,et al.  Reduction of Torque Ripple Due to Demagnetization in PMSM Using Current Compensation , 2010, IEEE Transactions on Applied Superconductivity.

[15]  Thomas M. Jahns,et al.  Analysis of Rotor Core Eddy-Current Losses in Interior Permanent Magnet Synchronous Machines , 2008, 2008 IEEE Industry Applications Society Annual Meeting.

[16]  T. Lipo,et al.  Core Loss in Buried Magnet Permanent Magnet Synchronous Motors , 1989, IEEE Power Engineering Review.