Assessment of Bicyclist Head Injury Risk under Tangential Impact Conditions

Although cycling may be attractive for both economic and environmental reasons, cyclists are extremely vulnerable road users and subjected to falls or collisions with cars. Therefore, wearing a helmet is of crucial and vital importance considering the high percentage of head injuries in cyclists. The present research attempts to understand the degree of protection offered by a commercial bicycle helmet under realistic oblique impact conditions. Experimental research was carried out on an existing helmet to perform 2 oblique impact situations at ambient temperature. In parallel, the helmet was digitized and meshed to produce a finite element model (FEM) that was implemented under the PamCrash® crash code. Coupled to a 50th percentile Hybrid III dummy head FEM, the experimental tests were numerically reproduced in order to provide a validation of the helmet model under tangential impact conditions. Then, coupled to a detailed human head model in order to assess the head injury risk under tangential impact, results showed that even if frontal oblique impacts are more critical than lateral ones, computed injury risks are acceptable for a realistic head impact condition as extracted from bicyclist accident analysis.

[1]  U Björnstig,et al.  Pedal cycling fatalities in northern Sweden. , 1993, International journal of epidemiology.

[2]  Rémy Willinger,et al.  Improved head injury criteria based on head FE model , 2008 .

[3]  E. Eilert-Petersson,et al.  An epidemiological study of bicycle-related injuries. , 1997, Accident; analysis and prevention.

[4]  J D Langley,et al.  Injuries to pedal cyclists resulting in death and hospitalisation. , 1993, The New Zealand medical journal.

[5]  G. Rechnitzer,et al.  Head and neck responses in oblique motorcycle helmet impacts: a novel laboratory test method , 2011 .

[6]  N. J. Mills,et al.  Response of helmets in direct and oblique impacts , 1996 .

[7]  A. Gilchrist,et al.  Oblique impact testing of bicycle helmets , 2008 .

[8]  Peter Halldin,et al.  A new oblique impact test for motorcycle helmets , 2001 .

[9]  A. Gilchrist,et al.  Finite-element analysis of bicycle helmet oblique impacts , 2008 .

[10]  T. Gennarelli.  Head injury in man and experimental animals: clinical aspects. , 1983, Acta neurochirurgica. Supplementum.

[11]  N. J. Mills,et al.  Jockeys’ head injuries and skull cap performance , 1996 .

[12]  Bertil Aldman,et al.  Helmet attenuation of the head response in oblique impacts to the ground , 1978 .

[13]  Rémy Willinger,et al.  Multi-directional optimisation against biomechanical criteria of a head–helmet coupling , 2006 .

[14]  Jan Goffin,et al.  A transient finite element study reveals the importance of the bicycle helmet material properties on head protection during an impact , 2009 .

[15]  D. J. Thomas,et al.  Biomechanics of skull fracture. , 1995, Journal of neurotrauma.

[16]  Rémy Willinger,et al.  Modelling and validation of motorcyclist helmet with composite shell , 2012 .

[17]  S. Thomas,et al.  Effectiveness of bicycle helmets in preventing head injury in children: case-control study , 1994, BMJ.

[18]  Rémy Willinger,et al.  Validation of a 3D Anatomic Human Head Model and Replication of Head Impact in Motorcycle Accident by Finite Element Modeling , 1997 .

[19]  Caroline Deck,et al.  Influence of rotational acceleration on intracranial mechanical parameters under accidental circumstances , 2007 .

[20]  R Willinger,et al.  Development and validation of a bicycle helmet: assessment of head injury risk under standard impact conditions , 2012, Computer methods in biomechanics and biomedical engineering.

[21]  S. Margulies,et al.  A proposed tolerance criterion for diffuse axonal injury in man. , 1992, Journal of biomechanics.

[22]  F P Rivara,et al.  Damage to bicycle helmets involved with crashes. , 1997, Accident; analysis and prevention.

[23]  Claude Tarriere,et al.  Development of a F.E.M. of the human head according to a specific test protocol , 1992 .