Fabrication and Optimization of Bilayered Nanoporous Anodic Alumina Structures as Multi-Point Interferometric Sensing Platform

Herein, we present an innovative strategy for optimizing hierarchical structures of nanoporous anodic alumina (NAA) to advance their optical sensing performance toward multi-analyte biosensing. This approach is based on the fabrication of multilayered NAA and the formation of differential effective medium of their structure by controlling three fabrication parameters (i.e., anodization steps, anodization time, and pore widening time). The rationale of the proposed concept is that interferometric bilayered NAA (BL-NAA), which features two layers of different pore diameters, can provide distinct reflectometric interference spectroscopy (RIfS) signatures for each layer within the NAA structure and can therefore potentially be used for multi-point biosensing. This paper presents the structural fabrication of layered NAA structures, and the optimization and evaluation of their RIfS optical sensing performance through changes in the effective optical thickness (EOT) using quercetin as a model molecule. The bilayered or funnel-like NAA structures were designed with the aim of characterizing the sensitivity of both layers of quercetin molecules using RIfS and exploring the potential of these photonic structures, featuring different pore diameters, for simultaneous size-exclusion and multi-analyte optical biosensing. The sensing performance of the prepared NAA platforms was examined by real-time screening of binding reactions between human serum albumin (HSA)-modified NAA (i.e., sensing element) and quercetin (i.e., analyte). BL-NAAs display a complex optical interference spectrum, which can be resolved by fast Fourier transform (FFT) to monitor the EOT changes, where three distinctive peaks were revealed corresponding to the top, bottom, and total layer within the BL-NAA structures. The spectral shifts of these three characteristic peaks were used as sensing signals to monitor the binding events in each NAA pore in real-time upon exposure to different concentrations of quercetin. The multi-point sensing performance of BL-NAAs was determined for each pore layer, with an average sensitivity and low limit of detection of 600 nm (mg mL−1)−1 and 0.14 mg mL−1, respectively. BL-NAAs photonic structures have the capability to be used as platforms for multi-point RIfS sensing of biomolecules that can be further extended for simultaneous size-exclusion separation and multi-analyte sensing using these bilayered nanostructures.

[1]  Cheryl Suwen Law,et al.  Structural Engineering of Nanoporous Anodic Alumina Photonic Crystals by Sawtooth-like Pulse Anodization. , 2016, ACS applied materials & interfaces.

[2]  Dusan Losic,et al.  Porous alumina with shaped pore geometries and complex pore architectures fabricated by cyclic anodization. , 2009, Small.

[3]  D. Reichl,et al.  Sensing of Volatile Organic Compounds Using a Simplified Reflectometric Interference Spectroscopy Setup , 2000 .

[4]  Marco Salerno,et al.  Multifunctional substrates of thin porous alumina for cell biosensors , 2014, Journal of Materials Science: Materials in Medicine.

[5]  Liliana Jiménez,et al.  Polyphenols: food sources and bioavailability. , 2004, The American journal of clinical nutrition.

[6]  D. Losic,et al.  Assessment of Binding Affinity between Drugs and Human Serum Albumin Using Nanoporous Anodic Alumina Photonic Crystals. , 2016, Analytical chemistry.

[7]  Dusan Losic,et al.  Nanoporous anodic aluminium oxide: Advances in surface engineering and emerging applications , 2013 .

[8]  Josep Ferré-Borrull,et al.  Tuning the photonic stop bands of nanoporous anodic alumina-based distributed bragg reflectors by pore widening. , 2013, ACS applied materials & interfaces.

[9]  Michael J. Sailor,et al.  A Porous Silicon Optical Biosensor: Detection of Reversible Binding of IgG to a Protein A-Modified Surface , 1999 .

[10]  Dusan Losic,et al.  Nanoporous Anodic Alumina Platforms: Engineered Surface Chemistry and Structure for Optical Sensing Applications , 2014, Sensors.

[11]  Guenter Gauglitz,et al.  Direct optical sensors: principles and selected applications , 2005, Analytical and bioanalytical chemistry.

[12]  Joseph G. Shapter,et al.  Structural and chemical modification of porous alumina membranes , 2009 .

[13]  Josep Ferré-Borrull,et al.  Nanoporous Anodic Alumina Barcodes: Toward Smart Optical Biosensors , 2012, Advanced materials.

[14]  Günter Gauglitz,et al.  IR absorption and reflectometric interference spectroscopy (RIfS) combined to a new sensing approach for gas analytes absorbed into thin polymer films. , 2009, Spectrochimica acta. Part A, Molecular and biomolecular spectroscopy.

[15]  J. Pallarès,et al.  1-D nanoporous anodic alumina rugate filters by means of small current variations for real-time sensing applications , 2014, Nanoscale Research Letters.

[16]  Dusan Losic,et al.  Preparation of porous anodic alumina with periodically perforated pores. , 2009, Langmuir : the ACS journal of surfaces and colloids.

[17]  Josep Ferré-Borrull,et al.  Gold-coated ordered nanoporous anodic alumina bilayers for future label-free interferometric biosensors. , 2013, ACS applied materials & interfaces.

[18]  W. Oleszek,et al.  Antioxidant and antiradical activities of flavonoids. , 2001, Journal of agricultural and food chemistry.

[19]  Andreas Brecht,et al.  Recent developments in optical transducers for chemical or biochemical applications , 1997 .

[20]  G. Fei,et al.  Modulation of Transmission Spectra of Anodized Alumina Membrane Distributed Bragg Reflector by Controlling Anodization Temperature , 2009, Nanoscale research letters.

[21]  Dusan Losic,et al.  Structural and optical nanoengineering of nanoporous anodic alumina rugate filters for real-time and label-free biosensing applications. , 2014, Analytical chemistry.

[22]  Grzegorz D Sulka,et al.  Distributed Bragg reflector based on porous anodic alumina fabricated by pulse anodization , 2012, Nanotechnology.

[23]  Josep Ferré-Borrull,et al.  Structural engineering of nanoporous anodic alumina funnels with high aspect ratio , 2011 .

[24]  Enhanced the optical transmission efficiency by funnel-shaped nanopore , 2016, 2016 IEEE International Conference on Manipulation, Manufacturing and Measurement on the Nanoscale (3M-NANO).

[25]  A. Bera,et al.  Quercetin inhibits acid-sensing ion channels through a putative binding site in the central vestibular region , 2017, Neuroscience.

[26]  A. Yamaguchi,et al.  Optical waveguide sensor based on a porous anodic alumina/aluminum multilayer film. , 2009, Analytical chemistry.

[27]  Dusan Losic,et al.  Label-Free real-time quantification of enzyme levels by interferometric spectroscopy combined with gelatin-modified nanoporous anodic alumina photonic films. , 2015, Analytical chemistry.

[28]  Nicolas H Voelcker,et al.  Nanoporous alumina-based interferometric transducers ennobled. , 2011, Nanoscale.

[29]  Jing Wang,et al.  Detection of flavonoids and assay for their antioxidant activity based on enlargement of gold nanoparticles , 2007, Analytical and bioanalytical chemistry.

[30]  David J.A. Jenkins,et al.  Dietary fiber, the evolution of the human diet and coronary heart disease , 1998 .

[31]  A. Brecht,et al.  Optical probes and transducers. , 1995, Biosensors & bioelectronics.

[32]  D. Losic,et al.  Nanoporous Anodic Alumina: A Versatile Platform for Optical Biosensors , 2014, Materials.

[33]  Dusan Losic,et al.  Controlling interferometric properties of nanoporous anodic aluminium oxide , 2012, Nanoscale Research Letters.

[34]  Dusan Losic,et al.  Label-free reflectometric interference microchip biosensor based on nanoporous alumina for detection of circulating tumour cells. , 2012, Biosensors & bioelectronics.

[35]  Cheryl Suwen Law,et al.  Engineering of Surface Chemistry for Enhanced Sensitivity in Nanoporous Interferometric Sensing Platforms. , 2017, ACS applied materials & interfaces.

[36]  Dusan Losic,et al.  A nanoporous interferometric micro-sensor for biomedical detection of volatile sulphur compounds , 2011, Nanoscale research letters.

[37]  X. Sheng,et al.  Integration of Self-Assembled Porous Alumina and Distributed Bragg Reflector for Light Trapping in Si Photovoltaic Devices , 2010, IEEE Photonics Technology Letters.

[38]  Günter Gauglitz,et al.  Direct optical detection in bioanalysis: an update , 2010, Analytical and bioanalytical chemistry.

[39]  R. Niessner,et al.  Molecularly imprinted polymer films for reflectometric interference spectroscopic sensors. , 2007, Biosensors & bioelectronics.

[40]  Dusan Losic,et al.  Insitu monitored engineering of inverted nanoporous anodic alumina funnels: on the precise generation of 3D optical nanostructures. , 2014, Nanoscale.