Design Tools for Zero-Net Mass-Flux Separation Control Devices

Abstract : This report discusses the fundamental dynamics of zero-net mass flux (ZNMF) actuators commonly used in active flow-control applications. The present work addresses unresolved technical issues by providing a clear physical understanding of how these devices behave in a quiescent medium and interact with an external boundary layer by developing and validating reduced-order models. The results are expected to ultimately aid in the analysis and development of design tools for ZNMF actuators in flow-control applications.

[1]  Lyle N. Long,et al.  DIRECT AEROACOUSTIC AND AERODYNAMIC SIMULATION OF MULTI-HOLE ENGINE LINERS , 1998 .

[2]  H. Sung,et al.  Effect of local forcing on a turbulent boundary layer , 2001 .

[3]  Andrew M. Honohan.  The interaction of synthetic jets with cross flow and the modification of aerodynamic surfaces , 2003 .

[4]  Ray Kirby,et al.  The impedance of perforated plates subjected to grazing gas flow and backed by porous media , 1998 .

[5]  A. Cain,et al.  NUMERICAL SIMULATION OF SYNTHETIC JET ACTUATORS , 1997 .

[6]  Louis N. Cattafesta,et al.  Scaling of Vorticity Flux and Entrance Length Effects in Zero-Net Mass-Flux Devices , 2005 .

[7]  Vincent Pagneux,et al.  Acoustic impedance measurement with grazing flow , 2001 .

[8]  Jean-Christophe Béra,et al.  Control of boundary layer separation by jet oscillation , 1998 .

[9]  David B. Goldstein,et al.  DNS of micro jets for turbulent boundary layer control , 2001 .

[10]  P. Spalart.  A One-Equation Turbulence Model for Aerodynamic Flows , 1992 .

[11]  Louis N. Cattafesta,et al.  Interaction of Adjacent Synthetic Jets in an Airfoil Separation Control Application , 2003 .

[12]  W. E. Zorumski,et al.  Flow resistance of perforated plates in tangential flow , 1971 .

[13]  J. R. Guarino,et al.  Characterization of laminar jet impingement cooling in portable computer application , 2001, Seventeenth Annual IEEE Semiconductor Thermal Measurement and Management Symposium (Cat. No.01CH37189).

[14]  A. Glezer.  The formation of vortex rings , 1988 .

[15]  R. Eldredge,et al.  Active Control of a Separating Boundary Layer with Steady Vortex Generating Jets - Detailed Flow Measurements , 2004 .

[16]  Edward J. Rice.  Model for the Acoustic Impedance of a Perforated Plate Liner with Multiple Frequency Excitation , 1972 .

[17]  A. Glezer,et al.  Enhanced mixing in a simulated combustor using synthetic jet actuators , 1999 .

[18]  A. Glezer,et al.  The formation and evolution of synthetic jets , 1998 .

[19]  Andrew J. Kurdila,et al.  Reduced Order Nonlinear Navier-Stokes Models for Synthetic Jets , 2002 .

[20]  Willie R. Watson,et al.  Comparison of Acoustic Impedance Eduction Techniques for Locally-Reacting Liners , 2003 .

[21]  L. Sirovich.  Turbulence and the dynamics of coherent structures. I. Coherent structures , 1987 .

[22]  D. Smith,et al.  The Influence of Orifice Orientation on the Interaction of a Synthetic Jet with a Turbulent Boundary Layer , 2001 .

[23]  T. Douglas Mast,et al.  Describing‐function theory for flow excitation of resonators , 1995 .

[24]  G. W. Swift,et al.  A comparison between synthetic jets and continuous jets , 2003 .

[25]  P. Nelson,et al.  Fluid dynamics of a flow excited resonance, part I: Experiment , 1981 .

[27]  J. Bons,et al.  Control of Low-Pressure Turbine Separation Using Vortex-Generator Jets , 2002 .

[28]  B. Morton,et al.  The generation and decay of vorticity , 1984 .

[29]  H. Fernholz,et al.  Flow-induced acoustic resonators for separation control , 2002 .

[30]  U. Ingard,et al.  Acoustic Circulation Effects and the Nonlinear Impedance of Orifices , 1950 .

[31]  A. Crook,et al.  The development and implementation of synthetic jets for the control of separated flow , 1999 .

[32]  E. J. Rice,et al.  A theoretical study of the acoustic impedance of orifices in the presence of a steady grazing flow , 1976 .

[33]  On a non-linear differential equation modelling Helmholtz resonator response , 1989 .

[34]  Michael Amitay,et al.  The dynamics of flow reattachment over a thick airfoil controlled by synthetic jet actuators , 1999 .

[35]  Barton L Smith,et al.  Power dissipation and time-averaged pressure in oscillating flow through a sudden area change. , 2003, The Journal of the Acoustical Society of America.

[36]  Alan S. Hersh,et al.  Effect of grazing flow on the acoustic impedance of Helmholtz resonators consisting of single and clustered orifices , 1978 .

[37]  Michael Amitay,et al.  Control of Internal Flow Separation using Synthetic Jet Actuators , 2000 .

[38]  Q. Gallas,et al.  Low Dimensional Modeling of Zero-Net Mass-Flux Actuators , 2004 .

[39]  Douglas R. Smith.  A Study of the Formation and Scaling of a Synthetic Jet , 2004 .

[40]  Avi Seifert,et al.  Active flow control of a delta wing at high incidence using segmented piezoelectric actuators , 2002 .

[41]  R. Mittal,et al.  Sensitivity of Synthetic Jets to the Design of the Jet Cavity , 2002 .

[42]  A. Sadri,et al.  Control of turbulent flow separation by synthetic jets , 2000 .

[43]  Michael Amitay,et al.  Aerodynamic Flow Control Using Synthetic Jet Technology , 1998 .

[44]  S. A. Elder.  Self‐excited depth‐mode resonance for a wall‐mounted cavity in turbulent flow , 1978 .

[45]  W. Z. Black,et al.  Thermal management of a laptop computer with synthetic air microjets , 1998, ITherm'98. Sixth Intersociety Conference on Thermal and Thermomechanical Phenomena in Electronic Systems (Cat. No.98CH36208).

[46]  U. Ingard,et al.  Acoustic Nonlinearity of an Orifice , 1967 .

[47]  R. Holman,et al.  A Jet Formation Criterion for Synthetic Jet Actuators , 2003 .

[48]  T. Lund,et al.  A Non-Body Conformal Grid Method for Simulation of Compressible Flows with Complex Immersed Boundaries , 2004 .

[49]  M. Michard,et al.  Flow analysis of two-dimensional pulsed jets by particle image velocimetry , 2001 .

[50]  M. S. Howe.  On the theory of unsteady shearing flow over a slot , 1981, Philosophical Transactions of the Royal Society of London. Series A, Mathematical and Physical Sciences.

[51]  Andrew B. Bauer,et al.  Impedance Theory and Measurements on Porous Acoustic Liners , 1977 .

[52]  Seifert Avi,et al.  Sweep and Compressibility Effects on Active Separation Control at High Reynolds Numbers , 2000 .

[53]  Ari Glezer,et al.  Mixing control of fuel jets using synthetic jet technology - Velocity field measurements , 1999 .

[54]  Avi Seifert,et al.  Periodic excitation for jet vectoring and enhanced spreading , 1999 .

[55]  A. Glezer,et al.  Vectoring and small-scale motions effected in free shear flows using synthetic jet actuators , 1997 .

[56]  M. Amitay,et al.  Aspects of low- and high-frequency actuation for aerodynamic flow control , 2005 .

[57]  M. Amitay,et al.  SYNTHETIC JETS , 2001 .

[58]  J. W. Sullivan.  A method for modeling perforated tube muffler components. I. Theory , 1979 .

[59]  R. Mittal,et al.  Interaction of a Synthetic Jet with a Flat Plate Boundary Layer , 2001 .

[60]  Ari Glezer,et al.  Jet vectoring using synthetic jets , 2002, Journal of Fluid Mechanics.

[61]  Israel J Wygnanski,et al.  Boundary layer and flow control by periodic addition of momentum , 1997 .

[62]  U. Ingard.  On the Theory and Design of Acoustic Resonators , 1953 .

[63]  Willie R. Watson,et al.  Optimization Method for Educing Variable-Impedance Liner Properties , 1998 .

[64]  Artur J. Jaworski,et al.  Contribution to the Understanding of Flow Interactions Between Multiple Synthetic Jets , 2003 .

[65]  P. Nelson,et al.  Fluid dynamics of a flow excited resonance, Part II: Flow acoustic interaction , 1983 .

[66]  R. E. Kraft,et al.  Design and performance of duct acoustic treatment , 1991 .

[67]  Juan Fernando Betts.  Experiments and Impedance Modeling of Liners Including The Effect of Bias Flow , 2000 .

[68]  Michael Amitay,et al.  Aerodynamic control using synthetic jets , 2000 .

[69]  Mirosław Meissner,et al.  Excitation of Helmholtz resonator by grazing air flow , 2002 .

[70]  J. Edwards,et al.  Computational study of micro fluid mechanics of duct acoustic treatment , 1999 .

[71]  Michael Amitay,et al.  Modification of the Aerodynamic Characteristics of Bluff Bodies Using Fluidic Actuators , 1997 .

[72]  Avi Seifert,et al.  Boundary Condition Effects on Oscillatory Momentum Generator , 2003 .

[73]  R. Mittal,et al.  On the virtual aeroshaping effect of synthetic jets , 2002 .

[74]  D. C. McCormick,et al.  BOUNDARY LAYER SEPARATION CONTROL WITH DIRECTED SYNTHETIC JETS , 2000 .

[75]  J. Seitzman,et al.  Controlled fuel-air mixing using a synthetic jet array , 2000 .

[76]  A. Glezer,et al.  Controlled interactions of adjacent synthetic jets , 1999 .

[77]  David A. Peters,et al.  Parametric and dynamic modeling for synthetic jet control of a post-stall airfoil , 2001 .

[78]  N. Didden.  On the formation of vortex rings: Rolling-up and production of circulation , 1979 .

[79]  A. Crook,et al.  Measurements and visualisations of synthetic jets , 2001 .

[80]  Rajat Mittal,et al.  Simulations of Complex Flows and Fluid-Structure Interaction Problems on Fixed Cartesian Grids , 2003 .

[81]  L. Homyak,et al.  Experimental evaluation of a spinning-mode acoustic-treatment design concept for aircraft inlets. [suppression of YF-102 engine fan noise] , 1980 .

[82]  Avi Seifert,et al.  Separation Control at Flight Reynolds Numbers: Lessons Learned and Future Directions , 2000 .

[83]  Michael Amitay,et al.  MODIFICATION OF LIFTING BODY AERODYNAMICS USING SYNTHETIC JET ACTUATORS , 1998 .