A new method of inverse kinematics solution for industrial 7DOF robot

A new method of inverse kinematics solution for industrial 7DOF robot is presented. The forward kinematics solution of the robot was solved by D-H method. The method was adopted by combination the separation of position and posture of robot and algebraic iterative, and transforming the inverse kinematic solution of 7DOF robot to the position redundant problem of 4DOF robot. The simulation of the joints' movement of robot was implemented by MATLAB software programming. The computational complexity of this method is relatively small, suitable for real-time control, which is suitable for application in industrial robot control.

[1]  Atsushi Konno,et al.  End effector constrained path planning for 7DOF manipulator , 2010, 2010 IEEE/SICE International Symposium on System Integration.

[2]  Ning Xi,et al.  An online motion planning algorithm for a 7DOF redundant manipulator , 2010, 2010 IEEE International Conference on Robotics and Biomimetics.

[3]  Rajiv V. Dubey,et al.  Real-time implementation of an optimization scheme for seven-degree-of-freedom redundant manipulators , 1991, IEEE Trans. Robotics Autom..

[4]  Rajiv V. Dubey,et al.  A weighted least-norm solution based scheme for avoiding joint limits for redundant manipulators , 1993, [1993] Proceedings IEEE International Conference on Robotics and Automation.

[5]  Kazuhiro Kosuge,et al.  Analytical Inverse Kinematic Computation for 7-DOF Redundant Manipulators With Joint Limits and Its Application to Redundancy Resolution , 2008, IEEE Transactions on Robotics.