Kinetostatic design and development of a non-fully symmetric parallel Delta robot with one structural simplified kinematic linkage
暂无分享,去创建一个
Ju Li | Guanglei Wu | Qingmei Meng | Huiping Shen | Jiaming Deng | Huiping Shen | Qingmei Meng | Jiaming Deng | Ju Li | Guanglei Wu
[1] Guanglei Wu,et al. Parallel PnP Robots , 2021 .
[2] Clément Gosselin,et al. Parametric Stiffness Analysis of the Orthoglide , 2004, ArXiv.
[3] Sébastien Briot,et al. Optimal technology-oriented design of parallel robots for high-speed machining applications , 2010, 2010 IEEE International Conference on Robotics and Automation.
[4] Xin-Jun Liu,et al. A New Approach to the Design of a DELTA Robot with a Desired Workspace , 2004, J. Intell. Robotic Syst..
[5] Jean-Pierre Merlet,et al. Designing a Parallel Manipulator for a Specific Workspace , 1997, Int. J. Robotics Res..
[6] Jorge Angeles,et al. Optimum structural design of a two-limb Schönflies motion generator , 2014 .
[7] Han Sung Kim,et al. Design Optimization of a Cartesian Parallel Manipulator , 2003 .
[8] Qinchuan Li,et al. Elastostatic stiffness modeling of overconstrained parallel manipulators , 2018 .
[9] Xiaolin Hu,et al. Design, analysis, and stiffness optimization of a three degree of freedom parallel manipulator , 2009, Robotica.
[10] Damien Chablat,et al. Architecture optimization of a 3-DOF translational parallel mechanism for machining applications, the orthoglide , 2003, IEEE Trans. Robotics Autom..
[11] Bijan Shirinzadeh,et al. Enhanced stiffness modeling, identification and characterization for robot manipulators , 2005, IEEE Transactions on Robotics.
[12] Kalyanmoy Deb,et al. A fast and elitist multiobjective genetic algorithm: NSGA-II , 2002, IEEE Trans. Evol. Comput..
[13] Meng Li,et al. Optimal kinematic design of 2-DOF parallel manipulators with well-shaped workspace bounded by a specified conditioning index , 2004, IEEE Transactions on Robotics and Automation.
[14] Stéphane Caro,et al. Dynamic modeling and design optimization of a 3-DOF spherical parallel manipulator , 2014, Robotics Auton. Syst..
[15] Tian Huang,et al. Dimensional synthesis of the Delta robot using transmission angle constraintsDimensional synthesis of the Delta robot using transmission angle constraints , 2012, Robotica.
[16] S. Bai. Optimum design of spherical parallel manipulators for a prescribed workspace , 2010 .
[17] Guanglei Wu,et al. Stiffness Analysis and Optimization of a Co-axial Spherical Parallel Manipulator , 2014 .
[18] Imin Kao,et al. Conservative Congruence Transformation for Joint and Cartesian Stiffness Matrices of Robotic Hands and Fingers , 2000, Int. J. Robotics Res..
[19] Alessandro Cammarata. Optimized design of a large-workspace 2-DOF parallel robot for solar tracking systems , 2015 .
[20] Shaoping Bai,et al. Architecture optimization of a parallel Schönflies-motion robot for pick-and-place applications in a predefined workspace , 2016 .
[21] Yixi Wang,et al. Stiffness Analysis of a Semi-symmetrical Three-Translation Delta-CU Parallel Robot , 2019, Robotics and Mechatronics.
[22] Alon Wolf,et al. Investigation of Singularities and Self-Motions of the 3-UPU Robot , 2002 .
[23] Jorge Angeles,et al. Fundamentals of Robotic Mechanical Systems , 2008 .
[24] M. López,et al. Delta robot: Inverse, direct, and intermediate Jacobians , 2006 .
[25] Med Amine Laribi,et al. Analysis and dimensional synthesis of the DELTA robot for a prescribed workspace , 2007 .
[26] Jiayu Li,et al. A Delta-CU - Kinematic Analysis and Dimension Design , 2017, ICIRA.
[27] Huiping Shen,et al. A four-limb parallel Schönflies motion generator with full-circle end-effector rotation , 2020 .
[28] Damien Chablat,et al. Multiobjective Design Optimization of 3–PRR Planar Parallel Manipulators , 2011 .
[29] Sébastien Briot,et al. Self-Motions of General 3- RPR Planar Parallel Robots , 2008, Int. J. Robotics Res..
[30] Guanglei Wu,et al. Mobile platform center shift in spherical parallel manipulators with flexible limbs , 2014 .
[31] Justus Laurens Herder,et al. Dynamic Balancing of Clavel’s Delta Robot , 2009 .
[32] Clément Gosselin,et al. A Global Performance Index for the Kinematic Optimization of Robotic Manipulators , 1991 .
[33] Sébastien Briot,et al. Enlarging parallel robot workspace through Type-2 singularity crossing , 2015 .
[34] Jorge Angeles,et al. Multiobjective Optimum Design of a Symmetric Parallel Schönflies-Motion Generator , 2009 .
[35] Damien Chablat,et al. Stiffness Analysis of Overconstrained Parallel Manipulators , 2009, ArXiv.
[36] Rajnikant V. Patel,et al. The mechanical design of a seven-axes manipulator with kinematic isotropy , 1995, J. Intell. Robotic Syst..
[37] J. Angeles,et al. Optimization of a Test Trajectory for SCARA Systems , 2008 .
[38] Yimin Song,et al. Elastodynamic Optimization of a 5-DoF Parallel Kinematic Machine Considering Parameter Uncertainty , 2019, IEEE/ASME Transactions on Mechatronics.
[39] François Pierrot,et al. DELTA: a simple and efficient parallel robot , 1990, Robotica.
[40] K. Miller,et al. Optimal kinematic design of spatial parallel manipulators: Application to Linear Delta robot , 2003 .
[41] Ridha Kelaiaia,et al. Multiobjective optimization of a linear Delta parallel robot , 2012 .
[42] Clément Gosselin,et al. Stiffness mapping for parallel manipulators , 1990, IEEE Trans. Robotics Autom..
[43] Cammarata Alessandro,et al. Elastodynamic optimization of a 3T1R parallel manipulator , 2014 .