An Experimental and Numerical Study of Pool Boiling Heat Transfer in Cu foam-enhanced Cells with Interlaced Microchannels
暂无分享,去创建一个
[1] O. el Moctar,et al. Experimental study of the influence of mesoscale surface structuring on single bubble dynamics , 2022, Ocean Engineering.
[2] H. Chu,et al. Review of Surface Modification in Pool Boiling Application: Coating Manufacturing Process and Heat Transfer Enhancement Mechanism , 2022, Applied Thermal Engineering.
[3] A. Inbaoli,et al. A review on techniques to alter the bubble dynamics in pool boiling , 2022, Applied Thermal Engineering.
[4] Leonardo Lachi Manetti,et al. Thermal efficiency of open-cell metal foams: Impact of foam thickness by comparing correlations and numerical modeling , 2022, Applied Thermal Engineering.
[5] A. Moita,et al. The Impact of Alumina Nanofluids on Pool Boiling Performance on Biphilic Surfaces for Cooling Applications , 2022, Energies.
[6] P. Cheng,et al. Boiling crisis due to bubble interactions , 2022, International Journal of Heat and Mass Transfer.
[7] Deepak Kumar Sharma,et al. Review of pool and flow boiling heat transfer enhancement through surface modification , 2021, International Journal of Heat and Mass Transfer.
[8] S. Paruya,et al. Numerical model of bubble shape and departure in nucleate pool boiling , 2021 .
[9] T. Karayiannis,et al. Pool Boiling Review: Part I- Fundamentals of Boiling and Relation to Surface Design , 2021 .
[10] Ali J. Chamkha,et al. Impact of micro-fins on a heated cylinder submerged in a nanofluid saturated medium , 2021 .
[11] A. Patil,et al. Pool Boiling Heat Transfer Enhancement Using Perforated Twisted Tape Fins , 2021, Journal of Thermal Science and Engineering Apllications.
[12] K. Fezzaa,et al. Microbubble dynamics and heat transfer in boiling droplets , 2021 .
[13] Anil Kumar,et al. Experimental study of bubble behaviors during boiling of a hydrocarbon refrigerant , 2021 .
[14] A. Moita,et al. A new pool boiling heat transfer correlation for wetting dielectric fluids on metal foams , 2021, International Journal of Heat and Mass Transfer.
[15] R. Pastuszko,et al. Pool Boiling of Water on Surfaces with Open Microchannels , 2021, Energies.
[16] R. Pastuszko,et al. Application of the Trefftz Method for Pool Boiling Heat Transfer on Open Microchannel Surfaces , 2021, Heat Transfer Engineering.
[17] A. Moita,et al. Effect of copper foam thickness on pool boiling heat transfer of HFE-7100 , 2020, International Journal of Heat and Mass Transfer.
[18] Yong Tang,et al. Pool boiling heat transfer of multi-scale composite copper powders fabricated by sintering-alloying-dealloying treatment , 2020 .
[19] Shuangfeng Wang,et al. Visualization investigation of the effects of nanocavity structure on pool boiling enhancement , 2019, International Journal of Heat and Mass Transfer.
[20] H. Sitaraman,et al. Nucleate pool boiling of R-245fa at low saturation temperatures for hydrogen precooling applications , 2019, International Journal of Heat and Mass Transfer.
[21] S. Suresh,et al. Modified surfaces using seamless graphene/carbon nanotubes based nanostructures for enhancing pool boiling heat transfer , 2018, Experimental Thermal and Fluid Science.
[22] K. K. Wong,et al. Saturated pool boiling enhancement using porous lattice structures produced by Selective Laser Melting , 2018, International Journal of Heat and Mass Transfer.
[23] Z. G. Xu,et al. Pool boiling investigation on gradient metal foams with double layers , 2018 .
[24] H. Saffari,et al. Surface structuring with inclined minichannels for pool boiling improvement , 2017 .
[25] Yong Tang,et al. Pool boiling performance and bubble dynamics on microgrooved surfaces with reentrant cavities , 2017 .
[26] Indrani Ghosh,et al. Geometric Mean of Fin Efficiency and Effectiveness: A Parameter to Determine Optimum Length of Open-Cell Metal Foam Used as Extended Heat Transfer Surface , 2017 .
[27] Yong Tang,et al. Pool boiling heat transfer of porous structures with reentrant cavities , 2016 .
[28] Seung M. You,et al. Microporous Coatings to Maximize Pool Boiling Heat Transfer of Saturated R-123 and Water , 2015 .
[29] Craig Zuhlke,et al. Enhanced pool-boiling heat transfer and critical heat flux on femtosecond laser processed stainless steel surfaces. , 2015, International journal of heat and mass transfer.
[30] Haitao Hu,et al. Influence of oil on nucleate pool boiling heat transfer of refrigerant on metal foam covers , 2011 .
[31] P. Das,et al. Some investigations on the enhancement of boiling heat transfer from planer surface embedded with continuous open tunnels , 2010 .
[32] Jungho Kim. Review of nucleate pool boiling bubble heat transfer mechanisms , 2009 .
[33] C. Ghiu,et al. Pool Boiling Using Thin Enhanced Structures Under Top-Confined Conditions , 2006 .
[34] V. Carey. MOLECULAR DYNAMICS SIMULATIONS AND LIQUID-VAPOR PHASE-CHANGE PHENOMENA , 2002 .
[35] W. Künstler,et al. Pool boiling heat transfer at finned tubes : influence of surface roughness and shape of the fins , 1997 .
[36] B. Mikic,et al. A New Correlation of Pool-Boiling Data Including the Effect of Heating Surface Characteristics , 1969 .
[37] S. Nukiyama. The Maximum and Minimum Values of the Heat Q Transmitted from Metal to Boiling Water under Atmospheric Pressure , 1966 .
[38] Y. Hsu. On the Size Range of Active Nucleation Cavities on a Heating Surface , 1962 .
[39] N. Zuber. On the Stability of Boiling Heat Transfer , 1958, Journal of Fluids Engineering.
[40] Zhen-qian Chen,et al. Wettability effect on pool boiling heat transfer using a multiscale copper foam surface , 2020 .
[41] B. Liu,et al. Experimental investigations of bubble behaviors and heat transfer performance on micro/nanostructure surfaces , 2019, International Journal of Thermal Sciences.
[42] Robert J. Moffat,et al. Describing the Uncertainties in Experimental Results , 1988 .