Effect of Cenosphere Fly Ash on the Thermal, Mechanical, and Morphological Properties of Rigid PVC Foam Composites

Cenosphere fly ash is a byproduct of coal combustion processes of power plants. It is composed of hollow, hard shelled, minute spheres, which are made up of silica, iron, and alumina. In this study, cenosphere fly ash is incorporated into rigid PVC foam to improve thermal and mechanical properties of their composites. Microstructural, physical, mechanical, and thermal properties of rigid PVC foam extruded with different loadings of cenosphere fly ash (6, 12, 18phr) are characterized. The measured density of the extruded PVC foam composites increased with cenosphere content, indicating a hindrance to the foaming process. Tensile and flexural mechanical properties improved at higher cenosphere content, while the impact strength decreased at initial loading of 6 phr of cenosphere particles and remained steady at higher loadings. Thermal characterization of the extruded samples showed that glass transition temperature remained almost unaffected, while TGA analysis revealed no change in the initial degradation temperature and significant improvement in the final degradation temperature. Thermo-mechanical properties measured by DMA revealed a remarkable improvement in the viscoelastic properties of the composites reinforced with cenosphere particles. SEM analysis of the composites microstructure confirmed that the cenosphere particles were mechanically interlocked with good interfacial interaction in the PVC matrix.

[1]  S. Gunashekar,et al.  Comparative Analysis of Rigid PVC Foam Reinforced with Class C and Class F Fly Ash , 2014 .

[2]  Kishore,et al.  Dielectric Impedance Studies of Poly(vinyl butyral)-Cenosphere Composite Films , 2014 .

[3]  N. Gupta,et al.  Mechanical and thermal properties of fly ash/vinyl ester syntactic foams , 2014 .

[4]  V. Bambole,et al.  Effect of particle size of fly ash cenospheres on the properties of acrylonitrile butadiene styrene-filled composites , 2014 .

[5]  A. Senapati,et al.  An Extensive Literature Review on the Usage of Fly Ash as a Reinforcing Agent for Different Matrices , 2014 .

[6]  S. Chauhan,et al.  Study on mechanical and tribological behavior of cenosphere filled vinylester composites - A Taguchi method , 2013 .

[7]  S. Mhaske,et al.  Studies in Effect of Low Concentration of Cenosphere on Mechanical, Thermal, Electrical, Crystallinity, Colorimetric and Morphological Properties of Epoxy Cured with Triethylenetetramine , 2013 .

[8]  K. Haridas,et al.  Studies on Cenospheres as Fillers for PVC Compounds for Applications in Electrical Cables , 2013 .

[9]  B. S. Bueno,et al.  Thermo-gravimetric analysis (TGA) after different exposures of high density polyethylene (HDPE) and poly vinyl chloride (PVC) geomembranes , 2012 .

[10]  S. Chauhan,et al.  Effect of Micro Size Cenosphere Particles Reinforcement on Tribological Characteristics of Vinylester Composites under Dry Sliding Conditions , 2012 .

[11]  S. Mhaske,et al.  Effect of Cenosphere Concentration on the Mechanical, Thermal, Rheological and Morphological Properties of Nylon 6 , 2012 .

[12]  N. Usta Investigation of fire behavior of rigid polyurethane foams containing fly ash and intumescent flame retardant by using a cone calorimeter , 2012 .

[13]  G. Deák,et al.  Preparation and characterization of poly(vinyl chloride)–continuous carbon fiber composites , 2012 .

[14]  N. Chand,et al.  Effect of cenosphere on dielectric properties of low density polyethylene. , 2012 .

[15]  M. K. Pandit,et al.  Study the Impact Property of Laminated Bamboo-Fibre Composite Filled with Cenosphere , 2012 .

[16]  Bhabani K. Satapathy,et al.  Structural, thermal, mechanical and dynamic mechanical properties of cenosphere filled polypropylene composites , 2011 .

[17]  N. Chand,et al.  Abrasive Wear Behavior of LDPE Filled with Silane Treated Flyash Cenospheres , 2011 .

[18]  M. Tavares,et al.  Preparation and Characterization of PVC/Natural Filler Composites , 2011 .

[19]  S. Nemat-Nasser,et al.  Dynamic Mechanical Analysis of Fly Ash Filled Polyurea Elastomer , 2011 .

[20]  N. Chand,et al.  Correlation of mechanical and tribological properties of organosilane modified cenosphere filled high density polyethylene , 2010 .

[21]  M. V. Deepthi,et al.  Mechanical and thermal characteristics of high density polyethylene-fly ash Cenospheres composites , 2010 .

[22]  V. Bambole,et al.  Effect of Particle Size and Concentration of Flyash on Properties of Polyester Thermoplastic Elastomer Composites , 2009 .

[23]  N. Gupta,et al.  Compressive and ultrasonic properties of polyester/fly ash composites , 2009 .

[24]  F. Chuang,et al.  Recycling and Application Characteristics of Fly Ash from Municipal Solid Waste Incinerator Blended with Polyurethane Foam , 2008 .

[25]  I. V. Pikulin,et al.  Functional Materials on the Basis of Cenospheres , 2005 .

[26]  P. Mensah,et al.  Compression properties of syntactic foams: effect of cenosphere radius ratio and specimen aspect ratio , 2003 .

[27]  P. Rohatgi,et al.  Crystallinity and selected properties of fly ash particles , 2002 .

[28]  E. Rabinovitch,et al.  Effect of extrusion conditions on rigid PVC foam , 1997 .

[29]  E. Case,et al.  Characterization of fly ash from coal-fired power plants , 1990 .