Porous Membranes of Montmorillonite/Poly(vinylidene fluoride-trifluorethylene) for Li-Ion Battery Separators

This work is funded by FEDER funds through the "Programa Operacional Factores de Competitividade-COMPETE" and by the national funds FCT-Fundacao para a Ciencia e a Tecnologia, Projects PTDC/CTM/69316/2006, Pest-C/QUI/UIO686/2011 and PTDC/CTM-NAN/112574/2009, and Grants SFRH/BD/66930/2009 (J.N.P.), SFRH/BD/62507/2009 (A. C. L.) and SFRH/BD/68499/2010 (C.M.C).

[1]  J. G. Rocha,et al.  Effect of degree of porosity on the properties of poly(vinylidene fluoride-trifluorethylene) for Li-ion battery separators , 2012 .

[2]  S. Lanceros‐Méndez,et al.  Effect of the microsctructure and lithium-ion content in poly[(vinylidene fluoride)-co-trifluoroethylene]/lithium perchlorate trihydrate composite membranes for battery applications , 2012 .

[3]  S. Lanceros‐Méndez,et al.  Electroactive Poly(Vinylidene Fluoride-Trifluorethylene) (PVDF-TrFE) Microporous Membranes for Lithium-Ion Battery Applications , 2012 .

[4]  F. Alloin,et al.  Poly(vinylidene fluoride)-based macroporous separators for supercapacitors , 2011 .

[5]  S. Lanceros‐Méndez,et al.  Tailoring porous structure of ferroelectric poly(vinylidene fluoride-trifluoroethylene) by controlling solvent/polymer ratio and solvent evaporation rate , 2011 .

[6]  Azadeh Sheidaei,et al.  Mechanical behavior of a battery separator in electrolyte solutions , 2011 .

[7]  Claus Daniel,et al.  Handbook of Battery Materials: DANIEL:HBK BATTERY MAT E2 O-BK , 2011 .

[8]  Li-ping Zhu,et al.  Preparation and properties of poly(ethylene oxide) gel filled polypropylene separators and their corresponding gel polymer electrolytes for Li-ion batteries , 2011 .

[9]  Ashok Kumar,et al.  Electrical and electrochemical studies of poly(vinylidene fluoride)–clay nanocomposite gel polymer electrolytes for Li-ion batteries , 2011 .

[10]  Ann Marie Sastry,et al.  A review of conduction phenomena in Li-ion batteries , 2010 .

[11]  S. Lanceros‐Méndez,et al.  Influence of processing parameters on the polymer phase, microstructure and macroscopic properties of poly(vinilidene fluoride)/Pb(Zr0.53Ti0.47)O3 composites , 2010 .

[12]  J-M Tarascon,et al.  Key challenges in future Li-battery research , 2010, Philosophical Transactions of the Royal Society A: Mathematical, Physical and Engineering Sciences.

[13]  H. Hwang,et al.  Preparation and Characterization of Porous PVdF-HFP/clay Nanocomposite Membranes , 2010 .

[14]  S. Lanceros‐Méndez,et al.  Poly[(vinylidene fluoride)-co-trifluoroethylene] Membranes Obtained by Isothermal Crystallization from Solution , 2010 .

[15]  J. C. Pinto,et al.  Morphology, thermal and mechanical properties of PVC/MMT nanocomposites prepared by solution blending and solution blending + melt compounding , 2010 .

[16]  Jiandong Gao,et al.  Preparation and characterization of a special structural poly(acrylonitrile)-based microporous membrane for lithium-ion batteries , 2010 .

[17]  Y. Chen-Yang,et al.  Effect of the addition of hydrophobic clay on the electrochemical property of polyacrylonitrile/LiClO4 polymer electrolytes for lithium battery , 2009 .

[18]  Jen-Ming Yang,et al.  Direct methanol fuel cell (DMFC) based on PVA/MMT composite polymer membranes , 2009 .

[19]  Sébastien Martinet,et al.  Macroporous poly(vinylidene fluoride) membrane as a separator for lithium-ion batteries with high charge rate capacity , 2009 .

[20]  Constantine D. Papaspyrides,et al.  A review on polymer–layered silicate nanocomposites , 2008 .

[21]  Y. Xiong,et al.  Effect of functionalized montmorillonite addition on the thermal properties and ionic conductivity of PVDF-PEG polymer electrolyte , 2008 .

[22]  Soojin Park,et al.  Ionic conductivity of polymeric nanocomposite electrolytes based on poly(ethylene oxide) and organo-clay materials , 2008 .

[23]  S. Dong,et al.  Enhanced electrochemical properties of nanocomposite polymer electrolyte based on copolymer with exfoliated clays , 2007 .

[24]  Tetsuo Sakai,et al.  Electrochemical Performances of Polyacrylonitrile Nanofiber-Based Nonwoven Separator for Lithium-Ion Battery , 2007 .

[25]  Elvira Fortunato,et al.  Studies of solid state electrochromic devices based on PEO/siliceous hybrids doped with lithium perchlorate , 2007 .

[26]  J. Mano,et al.  Thermal characterization of a vinylidene fluoride-trifluorethylene (75–25) (%mol) copolymer film , 2006 .

[27]  Xiangming He,et al.  Preparation of poly(acrylonitrile–butyl acrylate) gel electrolyte for lithium-ion batteries , 2006 .

[28]  Kee Suk Nahm,et al.  Poly(vinylidene fluoride-hexafluoropropylene) (PVdF-HFP) based composite electrolytes for lithium batteries , 2006 .

[29]  K. Kim,et al.  Infrared spectroscopic studies on crystallization and Curie transition behavior of ultrathin films of P(VDF/TrFE) (72/28) , 2006 .

[30]  B. Scrosati,et al.  A study on PVdF-based SiO2-containing composite gel-type polymer electrolytes for lithium batteries , 2004 .

[31]  Kang Xu,et al.  Nonaqueous liquid electrolytes for lithium-based rechargeable batteries. , 2004, Chemical reviews.

[32]  M. Whittingham,et al.  Lithium batteries and cathode materials. , 2004, Chemical reviews.

[33]  C. Wan,et al.  Preparation of porous, chemically cross-linked, PVdF-based gel polymer electrolytes for rechargeable lithium batteries , 2004 .

[34]  John R. Miller,et al.  Batteries, 1977 to 2002 , 2004 .

[35]  F. Chang,et al.  Ionic conductivity enhancement of the plasticized PMMA/LiClO4 polymer nanocomposite electrolyte containing clay , 2002 .

[36]  B. Scrosati,et al.  Poly(ethylene oxide)-Based, Nanocomposite Electrolytes as Improved Separators for Rechargeable Lithium Polymer Batteries The Li / LiMn 3 O 6 Case , 2002 .

[37]  M. Armand,et al.  Issues and challenges facing rechargeable lithium batteries , 2001, Nature.

[38]  Jung-Ki Park,et al.  Electrochemical performances of lithium-ion cells prepared with polyethylene oxide-coated separators , 2001 .

[39]  Anant Kumar Singh,et al.  Thermal characterization of organically modified montmorillonite , 2001 .

[40]  C. Vincent.  Lithium batteries : a 50-year perspective, 1959-2009 , 2000 .

[41]  Ce Wang,et al.  Poly(ethylene oxide)–silica hybrid materials for lithium battery application , 1999 .

[42]  Chi Ma,et al.  Cation Exchange Capacity of Kaolinite , 1999 .

[43]  D. Macfarlane,et al.  Lithium ion mobility in poly(vinyl alcohol) based polymer electrolytes as determined by 7Li NMR spectroscopy , 1998 .

[44]  Hari Singh Nalwa,et al.  Ferroelectric Polymers : Chemistry: Physics, and Applications , 1995 .

[45]  Avelino Corma,et al.  Inorganic Solid Acids and Their Use in Acid-Catalyzed Hydrocarbon Reactions , 1995 .

[46]  Doron Aurbach,et al.  The electrochemistry of noble metal electrodes in aprotic organic solvents containing lithium salts , 1991 .

[47]  Ian D. Raistrick,et al.  Application of Impedance Spectroscopy to Materials Science , 1986 .

[48]  B. Steele,et al.  Effects of inert fillers on the mechanical and electrochemical properties of lithium salt-poly(ethylene oxide) polymer electrolytes , 1982 .

[49]  K. Cole,et al.  Dispersion and Absorption in Dielectrics I. Alternating Current Characteristics , 1941 .

[50]  A. Stephan,et al.  Review on gel polymer electrolytes for lithium batteries , 2006 .

[51]  G. Lu,et al.  Mechanical Properties of Porous Materials , 1999 .

[52]  K. Norrish,et al.  The swelling of montmorillonite , 1954 .