Application of simulation in determining suitable operating parameters for industrial scale fluidized bed dryer during drying of high impurity moist paddy

A systematic approach has been developed for selecting the suitable drying parameters to be used for drying of high moisture and high impurity paddy with an industrial fluidized bed paddy dryer (10–20 t h−1 capacity) based on targeted specific air flow rate and residence time during two typical paddy drying seasons. A mathematical model was developed by modifying an existing model and was simulated and validated with observed industrial drying data as well as data reported in the literature. Comparison between the observed and simulated results showed that the mathematical model is capable of predicting outlet paddy moisture content and air temperature well. Suitable operating parameters were determined for reducing any initial paddy moisture content (mc) down to 24–25% dry basis (db), the safe mc level after fluidized bed drying to maintain rice quality, to achieve maximum possible throughput capacity of the dryer with corresponding energy consumption. Based on these criteria, bed thickness at 10 cm, specific air flow rate of 0.05 kg kg−1 s−1 (for corresponding bed air velocity of 2.3 m s−1), air temperature of 150 °C and residence time of 1.0 min were found to be suitable drying conditions for reducing paddy mc from 30 to 24.30% (db) in one season while the maximum throughput capacity of 15.7 tonne per hour (t h−1) might be achieved. The specific electrical and thermal energy were 0.48 and 6.15 MJ kg−1 water evaporated, respectively. On the other hand, the dryer capacity was found to be limited to 7.4 t h−1 during drying paddy of higher initial mc (35% db). This approach might provide easy and comprehensive guidelines for selecting suitable sets of operating parameters for any industrial fluidized bed dryer at its possible maximum throughput capacity for drying of freshly harvested high moist paddy with a high level of impurities.

[1]  Jens Burgschweiger,et al.  From hygroscopic single particle to batch fluidized bed drying kinetics , 1999 .

[2]  W. Daud,et al.  A Cross-Flow Model for Continuous Plug Flow Fluidized-Bed Cross-Flow Dryers , 2007 .

[3]  Somchart Soponronnarit,et al.  Effect of Fluidized Bed Drying Temperature on Various Quality Attributes of Paddy , 2004 .

[4]  Guangnan Chen,et al.  Evaluation of a simulation model in predicting the drying parameters for deep-bed paddy drying , 2009 .

[5]  Thananchai Leephakpreeda,et al.  Fluidized bed paddy drying in optimal conditions via adaptive fuzzy logic control , 2006 .

[6]  Somchart Soponronnarit,et al.  Quality maintenance and economy with high-temperature paddy-drying processes , 2005 .

[7]  Weerachet Jittanit,et al.  Industrial paddy drying and energy saving options , 2010 .

[8]  A. Midilli,et al.  A NEW MODEL FOR SINGLE-LAYER DRYING , 2002 .

[9]  Somchart Soponronnarit,et al.  MANAGING MOIST PADDY BY DRYING, TEMPERING AND AMBIENT AIR VENTILATION , 1999 .

[10]  Md. Sazzat Hossain Sarker,et al.  Drying Kinetics, Energy Consumption, and Quality of Paddy (MAR-219) during Drying by the Industrial Inclined Bed Dryer with or without the Fluidized Bed Dryer , 2013 .

[11]  John R. Grace,et al.  Modelling and Simulation of Batch and Continuous Fluidized Bed Dryers , 1995 .

[12]  Somchart Soponronnarit,et al.  EFFECT OF TEMPERING ON SUBSEQUENT DRYING OF PADDY USING FLUIDISATION TECHNIQUE , 2002 .

[13]  P. Lettieri,et al.  An introduction to heat transfer , 2007 .

[14]  Athapol Noomhorm,et al.  EFFECT OF DRYING AIR TEMPERATURE AND GRAIN TEMPERATURE OF DIFFERENT TYPES OF DRYER AND OPERATION ON RICE QUALITY , 2001 .

[15]  M. Izadifar,et al.  SIMULATION OF A CROSS-FLOW CONTINUOUS FLUIDIZED BED DRYER FOR PADDY RICE , 2003 .

[16]  Experimental Validation of a Mathematical Model for the Batch Drying of Corn Grains , 1995 .

[17]  Somchart Soponronnarit,et al.  OPTIMUM STRATEGY FOR FLUIDIZED BED PADDY DRYING , 1994 .

[18]  Somchart Soponronnarit,et al.  Comparison of performances of pulsed and conventional fluidised-bed dryers , 2005 .

[19]  S. Prachayawarakorn,et al.  Investigations on head-rice yield and operating time in the fluidised-bed drying process : experiment and simulation , 2005 .

[20]  Somkiat Prachayawarakorn,et al.  Development of Cross-Flow Fluidized Bed Paddy Dryer , 1996 .

[21]  Somchart Soponronnarit,et al.  Cross-Flow Fluidized Bed Paddy Dryer: Prototype and Commercialization , 1995 .