New Aluminum Alloys Specifically Designed for Laser Powder Bed Fusion: A Review

Aluminum alloys are key materials in additive manufacturing (AM) technologies thanks to their low density that, coupled with the possibility to create complex geometries of these innovative processes, can be exploited for several applications in aerospace and automotive fields. The AM process of these alloys had to face many challenges because, due to their low laser absorption, high thermal conductivity and reduced powder flowability, they are characterized by poor processability. Nowadays mainly Al-Si alloys are processed, however, in recent years many efforts have been carried out in developing new compositions specifically designed for laser based powder bed AM processes. This paper reviews the state of the art of the aluminum alloys used in the laser powder bed fusion process, together with the microstructural and mechanical characterizations.

[1]  J. Schoenung,et al.  In-situ characterization of laser-powder interaction and cooling rates through high-speed imaging of powder bed fusion additive manufacturing , 2017 .

[2]  E. Brandl,et al.  Additive manufactured AlSi10Mg samples using Selective Laser Melting (SLM): Microstructure, high cycle fatigue, and fracture behavior , 2012 .

[3]  F. Calignano,et al.  A study of the microstructure and the mechanical properties of an AlSiNi alloy produced via selective laser melting , 2017 .

[4]  H. Tsai,et al.  Transport Phenomena and Keyhole Dynamics during Pulsed Laser Welding , 2006 .

[5]  Christopher J. Sutcliffe,et al.  Selective laser melting of aluminium components , 2011 .

[6]  W. Yeong,et al.  Selective Laser Melting of aluminium alloy using a uniform beam profile , 2014 .

[7]  P. Rometsch,et al.  Characterisation of a novel Sc and Zr modified Al–Mg alloy fabricated by selective laser melting , 2017 .

[8]  F. Calignano,et al.  Single scan track analyses on aluminium based powders , 2018 .

[9]  Kamran Mumtaz,et al.  AlSi12 in-situ alloy formation and residual stress reduction using anchorless selective laser melting , 2015 .

[10]  T. Lee,et al.  Microstructure and mechanical properties of Al-Si-X alloys fabricated by gas atomization and extrusion process , 2009 .

[11]  R. Poprawe,et al.  Laser additive manufacturing of metallic components: materials, processes and mechanisms , 2012 .

[12]  M. Mohammadi,et al.  Contribution of Mg2Si precipitates to the strength of direct metal laser sintered AlSi10Mg , 2019, Materials Science and Engineering: A.

[13]  D. Manfredi,et al.  A comparison of Selective Laser Melting with bulk rapid solidification of AlSi10Mg alloy , 2018 .

[14]  M. Marietta,et al.  High-Strength Aluminum P / M Alloys , 2007 .

[15]  Eleonora Atzeni,et al.  Direct Metal Laser Sintering: an additive manufacturing technology ready to produce lightweight structural parts for robotic applications , 2013 .

[16]  Muyiwa Olabode,et al.  Weldability of high strength aluminium alloys , 2015 .

[17]  Han Huang,et al.  The role of a low-energy–density re-scan in fabricating crack-free Al85Ni5Y6Co2Fe2 bulk metallic glass composites via selective laser melting , 2014 .

[18]  F. Walther,et al.  Influence of Process Parameters on the Quality of Aluminium Alloy EN AW 7075 Using Selective Laser Melting (SLM) , 2016 .

[19]  Zhiheng Hu,et al.  Selective laser melting of high strength Al–Cu–Mg alloys: Processing, microstructure and mechanical properties , 2016 .

[20]  A. Simchi,et al.  Effect of rapid solidification on the microstructure and mechanical properties of hot-pressed Al―20Si―5Fe alloys , 2009 .

[21]  William E. Frazier,et al.  Metal Additive Manufacturing: A Review , 2014, Journal of Materials Engineering and Performance.

[22]  Hu Zhang,et al.  Selective laser melting of Al–8.5Fe–1.3V–1.7Si alloy: Investigation on the resultant microstructure and hardness , 2015 .

[23]  C. Kenel,et al.  Microstructure and mechanical properties of Al-Mg-Zr alloys processed by selective laser melting , 2018, Acta Materialia.

[24]  J. Kruth,et al.  Mechanical Properties of AlSi10Mg Produced by Selective Laser Melting , 2012 .

[25]  I. Ashcroft,et al.  Selective laser melting of aluminum alloys , 2017 .

[26]  T. Sercombe,et al.  Selective laser melting of aluminium and aluminium metal matrix composites: review , 2016 .

[27]  David W. Rosen,et al.  Design for Additive Manufacturing of Cellular Structures , 2008 .

[28]  A. Inoue.  Amorphous, nanoquasicrystalline and nanocrystalline alloys in Al-based systems , 1998 .

[29]  T. Yuan,et al.  Selective laser melting of a novel Sc and Zr modified Al-6.2 Mg alloy: Processing, microstructure, and properties , 2017 .

[30]  M. Elbestawi,et al.  The Effect of Selective Laser Melting Process Parameters on the Microstructure and Mechanical Properties of Al6061 and AlSi10Mg Alloys , 2018, Materials.

[31]  Lai‐Chang Zhang,et al.  Selective laser melting of an Al86Ni6Y4.5Co2La1.5 metallic glass: Processing, microstructure evolution and mechanical properties , 2014 .

[32]  A. Huang,et al.  Multiple precipitation pathways in an Al-7Si-0.6Mg alloy fabricated by selective laser melting , 2019, Scripta Materialia.

[33]  J. Eckert,et al.  Microstructure and mechanical properties of Al-Cu alloys fabricated by selective laser melting of powder mixtures , 2018 .

[34]  I. Uslan,et al.  Effects of variables on size and characteristics of gas atomised aluminium powders , 1999 .

[35]  J. Hosson,et al.  Laser melt injection in aluminum alloys: On the role of the oxide skin , 2000 .

[36]  Flaviana Calignano,et al.  Effect of heat treatment on corrosion resistance of DMLS AlSi10Mg alloy , 2016 .

[37]  W. Wallace,et al.  Microstructural study of a high-strength stress-corrosion resistant 7075 aluminium alloy , 1982 .

[38]  D. Miracle,et al.  Strengthening mechanisms of an Al-Mg-Sc-Zr alloy , 2002 .

[39]  R. M. Ward,et al.  Selective laser melting of AlSi10Mg: Influence of post-processing on the microstructural and tensile properties development , 2016 .

[40]  Hu Zhang,et al.  Selective laser melting of Al7050 powder: Melting mode transition and comparison of the characteristics between the keyhole and conduction mode , 2017 .

[41]  M. Mohammadi,et al.  Strengthening mechanisms in direct metal laser sintered AlSi10Mg: Comparison between virgin and recycled powders , 2018, Additive Manufacturing.

[42]  J. Beuth,et al.  Rapid Solidification: Selective Laser Melting of AlSi10Mg , 2016, JOM.

[43]  N. Tawfik.  Mechanical properties of rapidly solidified ribbons of some AI–Si based alloys , 1997 .

[44]  A. Genç,et al.  Characterization investigations of a melt-spun ternary Al-8Si-5.1Cu (in wt.%) alloy , 2003 .

[45]  F. Calignano,et al.  Effect of Process and Post-Process Conditions on the Mechanical Properties of an A357 Alloy Produced via Laser Powder Bed Fusion , 2017 .

[46]  J. Eckert,et al.  Production of high strength Al85Nd8Ni5Co2 alloy by selective laser melting , 2015 .

[47]  Yan Zhou,et al.  Effect of heat treatment on CuCrZr alloy fabricated by selective laser melting: Microstructure evolution, mechanical properties and fracture mechanism , 2016, Journal of Materials Research and Technology.

[48]  N. Shamsaei,et al.  Laser powder bed fusion of Ti-6Al-4V parts: Thermal modeling and mechanical implications , 2017 .

[49]  B. McWilliams,et al.  Microstructure and tensile property of a novel AlZnMgScZr alloy additively manufactured by gas atomization and laser powder bed fusion , 2019, Scripta Materialia.

[50]  Eleonora Atzeni,et al.  Experimental Analysis of Residual Stresses on AlSi10Mg Parts Produced by Means of Selective Laser Melting (SLM) , 2017 .

[51]  Michael Schmidt,et al.  New Developments of Laser Processing Aluminium Alloys via Additive Manufacturing Technique , 2011 .

[52]  T. Pollock,et al.  3D printing of high-strength aluminium alloys , 2017, Nature.

[53]  Zhiheng Hu,et al.  Effect of Zr content on formability, microstructure and mechanical properties of selective laser melted Zr modified Al-4.24Cu-1.97Mg-0.56Mn alloys , 2018, Journal of Alloys and Compounds.

[54]  Claus Emmelmann,et al.  Process and Mechanical Properties: Applicability of a Scandium modified Al-alloy for Laser Additive Manufacturing , 2011 .

[55]  D. Gu,et al.  Parametric analysis of thermal behavior during selective laser melting additive manufacturing of aluminum alloy powder , 2014 .

[56]  J. Eckert,et al.  Microstructure and phase formation in Al–20Si–5Fe–3Cu–1Mg synthesized by selective laser melting , 2016 .

[57]  Yifu Shen,et al.  Balling phenomena during direct laser sintering of multi-component Cu-based metal powder , 2007 .

[58]  S. Pillot,et al.  STUDY OF THE SUITABILITY OF ALUMINUM ALLOYS FOR ADDITIVE MANUFACTURING BY LASER POWDER- BED FUSION , 2017 .

[59]  V. Srivastava.  A Reviev on Advances in Rapid Prototype 3D Printing of Multi-Functional Applications , 2017 .

[60]  K. An,et al.  Stress partitioning behavior of an AlSi10Mg alloy produced by selective laser melting during tensile deformation using in situ neutron diffraction , 2016 .

[61]  V. A. Korolev,et al.  Novel heat-resistant Al-Si-Ni-Fe alloy manufactured by selective laser melting , 2019, Materials Letters.

[62]  E. O. Olakanmi,et al.  A review on selective laser sintering/melting (SLS/SLM) of aluminium alloy powders: Processing, microstructure, and properties , 2015 .

[63]  Moataz M. Attallah,et al.  Microstructure and strength of selectively laser melted AlSi10Mg , 2016 .

[64]  T. Watt,et al.  Comparison of Alsi10mg and Al 6061 Processed through Dmls , 2014 .

[65]  F. Calignano,et al.  Laser Powder Bed Fusion of a High Strength Al-Si-Zn-Mg-Cu Alloy , 2018 .

[66]  Michael Schmidt,et al.  Effects of Process Conditions on the Mechanical Behavior of Aluminium Wrought Alloy EN AW-2219 (AlCu6Mn) Additively Manufactured by Laser Beam Melting in Powder Bed , 2017, Micromachines.

[67]  A. Spierings,et al.  Influence of SLM scan-speed on microstructure, precipitation of Al3Sc particles and mechanical properties in Sc- and Zr-modified Al-Mg alloys , 2018 .

[68]  Jean-Pierre Kruth,et al.  Selective laser melting of nano-TiB 2 decorated AlSi10Mg alloy with high fracture strength and ductility , 2017 .

[69]  J. Kruth,et al.  Changing the alloy composition of Al7075 for better processability by selective laser melting , 2016 .

[70]  Zhiheng Hu,et al.  Analysis of processing parameters and characteristics of selective laser melted high strength Al-Cu-Mg alloys: From single tracks to cubic samples , 2018, Journal of Materials Processing Technology.

[71]  L. Murr,et al.  Processing and characterization of crack-free aluminum 6061 using high-temperature heating in laser powder bed fusion additive manufacturing , 2018, Additive Manufacturing.

[72]  Q. Jia,et al.  Characterisation of AlScZr and AlErZr alloys processed by rapid laser melting , 2018, Scripta Materialia.

[73]  A. Spierings,et al.  Microstructure and mechanical properties of as-processed scandium-modified aluminium using selective laser melting , 2016 .

[74]  Xiang-jie Yang,et al.  Preparation of semi-solid slurry containing fine and globular particles for wrought aluminum alloy 2024 , 2007 .

[75]  C. Leinenbach,et al.  Effect of laser rescanning on the grain microstructure of a selective laser melted Al-Mg-Zr alloy , 2018, Materials Characterization.

[76]  Guido A.O. Adam,et al.  Design for Additive Manufacturing—Element transitions and aggregated structures , 2014 .

[77]  Jamshid Sabbaghzadeh,et al.  The relation between liquation and solidification cracks in pulsed laser welding of 2024 aluminium alloy , 2009 .

[78]  Chandrika Kamath,et al.  Observation of keyhole-mode laser melting in laser powder-bed fusion additive manufacturing , 2014 .

[79]  A. Rubenchik,et al.  Calculation of laser absorption by metal powders in additive manufacturing. , 2015, Applied optics.

[80]  A. Spierings,et al.  Microstructural features of Sc- and Zr-modified Al-Mg alloys processed by selective laser melting , 2017 .

[81]  Hu Zhang,et al.  Characterization of Al–Fe–V–Si heat-resistant aluminum alloy components fabricated by selective laser melting , 2015 .

[82]  Y. Leng,et al.  Tensile deformation of 2618 and AlFeSiV aluminum alloys at elevated temperatures , 1990 .

[83]  Zhiheng Hu,et al.  Effect of Zirconium addition on crack, microstructure and mechanical behavior of selective laser melted Al-Cu-Mg alloy , 2017 .

[84]  M. Tang,et al.  Oxides, porosity and fatigue performance of AlSi10Mg parts produced by selective laser melting , 2017 .

[85]  J. Eckert,et al.  Microstructure and mechanical properties of a heat-treatable Al-3.5Cu-1.5Mg-1Si alloy produced by selective laser melting , 2018 .

[86]  Francesco Trevisan,et al.  On the Selective Laser Melting (SLM) of the AlSi10Mg Alloy: Process, Microstructure, and Mechanical Properties , 2017, Materials.

[87]  I. Ashcroft,et al.  On the formation of AlSi10Mg single tracks and layers in selective laser melting: Microstructure and nano-mechanical properties , 2016 .