Ultrasonically assisted friction stir welding of aluminium alloy 6061

Abstract Ultrasonically assisted friction stir welding (UAFSW) was explored. Metallographic structures and material flow prepared by UAFSW were compared with those prepared by conventional FSW. Hardness curves, tensile strength, and elongation of welds fabricated at different ultrasonic powers were characterised. Experimental results showed that hardness curves, tensile strength of welds increased with increased ultrasonic power when it was less than 50%. The elongations decreased with ultrasonic energy output increased. Scanning electron microscopy photographs in different positions of fracture by UAFSW show fracture pattern and origin.

[1]  R. Shiue,et al.  Microstructural evolution of brazing Ti–6Al–4V and TZM using silver-based braze alloy , 2004 .

[2]  Yansong Zhang,et al.  Effect of welding energy on interface zone of Al–Cu ultrasonic welded joint , 2013 .

[3]  Kwanghyun Park,et al.  Development and Analysis of Ultrasonic Assisted Friction Stir Welding Process. , 2009 .

[4]  V. Patel,et al.  Microstructure and mechanical properties of dissimilar welded Mg–Al joints by ultrasonic spot welding technique , 2012 .

[5]  R. Mishraa,et al.  Friction Stir Welding And Processing , 2005 .

[6]  Hahn Choo,et al.  Softening behaviour of friction stir welded Al 6061-T6 and Mg AZ31B alloys , 2011 .

[7]  L. Murr,et al.  Intercalation vortices and related microstructural features in the friction-stir welding of dissimilar metals , 1998 .

[8]  J. Campbell,et al.  Effects of vibration during solidification , 1981 .

[9]  G. Sheng,et al.  Reinforcement of Mg/Ti joints using ultrasonic assisted tungsten inert gas welding–brazing technology , 2014 .

[10]  Z. Y. Wang,et al.  Effect of Ultrasonic Vibration Solidification Treatment on the Corrosion Behavior of AZ80 Magnesium Alloy , 2013 .

[11]  V. Patel,et al.  Improving weld strength of magnesium to aluminium dissimilar joints via tin interlayer during ultrasonic spot welding , 2012 .

[12]  L. Murr,et al.  Friction-stir welding: microstructural characterization , 1998 .

[13]  Zhipeng Ma,et al.  Interfacial reaction of intermetallic compounds of ultrasonic-assisted brazed joints between dissimilar alloys of Ti6Al4V and Al4Cu1Mg. , 2011, Ultrasonics sonochemistry.

[14]  D. Kim,et al.  Microstructures and properties of friction stir welded 409L stainless steel using a Si3N4 tool , 2012 .

[15]  K. Shinozaki,et al.  Experimental investigation of material flow during friction stir spot welding , 2010 .

[16]  L. Murr,et al.  Solid-state flow visualization in the friction-stir welding of 2024 Al to 6061 Al , 1999 .

[17]  Jiuchun Yan,et al.  Behaviors of oxide film at the ultrasonic aided interaction interface of Zn–Al alloy and Al2O3p/6061Al composites in air , 2006 .

[18]  M. Pozuelo,et al.  Details of Mg–Zn reactions in AZ31 to galvanised mild steel ultrasonic spot welds , 2012 .

[19]  A. Reynolds,et al.  Relationships between weld parameters, hardness distribution and temperature history in alloy 7050 friction stir welds , 2005 .

[20]  Christophe Desrayaud,et al.  Correlation between microstructure and microhardness in a friction stir welded 2024 aluminium alloy , 2005 .

[21]  W. M. Thomas,et al.  Friction Stir Butt Welding , 1991 .

[22]  L. Murr,et al.  Flow visualization and residual microstructures associated with the friction-stir welding of 2024 aluminum to 6061 aluminum , 1999 .

[23]  A. Olufemi,et al.  Effects of Melt Vibration During Solidification on the Mechanical Property of Mg-Al-Zn Alloy , 2012 .

[24]  Massimiliano Annoni,et al.  Ultrasonic metal welding of AA 6022‐T4 lap joints: Part I – Technological characterisation and static mechanical behaviour , 2011 .