Tertiary and Quaternary Ammonium-Phosphate Ionic Liquids as Lubricant Additives

[1]  C. Drummond,et al.  Protic Ionic Liquids: Evolving Structure-Property Relationships and Expanding Applications. , 2015, Chemical reviews.

[2]  Bassem A. Kheireddin,et al.  Tribological Bench and Engine Dynamometer Tests of a Low Viscosity SAE 0W-16 Engine Oil Using a Combination of Ionic Liquid and ZDDP as Anti-Wear Additives , 2015, Front. Mech. Eng..

[3]  Bassem A. Kheireddin,et al.  Synergistic Effects Between Phosphonium‐Alkylphosphate Ionic Liquids and Zinc Dialkyldithiophosphate (ZDDP) as Lubricant Additives , 2015, Advanced materials.

[4]  S. Wartzack,et al.  Halide-Free Synthesis and Tribological Performance of Oil-Miscible Ammonium and Phosphonium-Based Ionic Liquids , 2015 .

[5]  Richard P Matthews,et al.  Hydrogen bonding in ionic liquids. , 2015, Chemical Society reviews.

[6]  Miaofang Chi,et al.  Phosphonium-organophosphate ionic liquids as lubricant additives: effects of cation structure on physicochemical and tribological characteristics. , 2014, ACS applied materials & interfaces.

[7]  Miaofang Chi,et al.  Comparison of an oil-miscible ionic liquid and ZDDP as a lubricant anti-wear additive , 2014 .

[8]  T. Espinosa,et al.  Protic ammonium carboxylate ionic liquid lubricants of OFHC copper , 2013 .

[9]  W. Holweger.  Fundamentals of Lubricants and Lubrication , 2013 .

[10]  T. Espinosa,et al.  Surface interactions, corrosion processes and lubricating performance of protic and aprotic ionic liquids with OFHC copper , 2013 .

[11]  T. Espinosa,et al.  Ultra-Low Friction with a Protic Ionic Liquid Boundary Film at the Water-Lubricated Sapphire–Stainless Steel Interface , 2013, Tribology Letters.

[12]  J. M. Martín,et al.  A multi-technique approach to the characterization of iron phosphide tribofilm , 2012 .

[13]  Wei-min Liu,et al.  Tribological Behavior of Protic Ionic Liquids with Dodecylamine Salts of Dialkyldithiocarbamate as Additives in Lithium Complex Grease , 2012, Tribology Letters.

[14]  P. Blau,et al.  Antiwear performance and mechanism of an oil-miscible ionic liquid as a lubricant additive. , 2012, ACS applied materials & interfaces.

[15]  M. Watanabe,et al.  Hydrogen bonds in protic ionic liquids and their correlation with physicochemical properties. , 2011, Chemical communications.

[16]  Usman Ali Rana,et al.  Protic ionic liquids based on phosphonium cations: comparison with ammonium analogues. , 2011, Chemical communications.

[17]  Thierry Robert.  Ionic Liquids: Past, Present and Future , 2011 .

[18]  S. Pang,et al.  Density, viscosity and electrical conductivity of protic alkanolammonium ionic liquids. , 2011, Physical chemistry chemical physics : PCCP.

[19]  B. Keppler,et al.  Quaternary Ammonium and Phosphonium Ionic Liquids in Chemical and Environmental Engineering , 2011 .

[20]  Nicholas M. K. Tse,et al.  Nanostructured protic ionic liquids retain nanoscale features in aqueous solution while precursor Brønsted acids and bases exhibit different behavior. , 2011, The journal of physical chemistry. B.

[21]  Bharat Bhushan,et al.  A Review of Ionic Liquids for Green Molecular Lubrication in Nanotechnology , 2010 .

[22]  R. González,et al.  Lubrication of TiN, CrN and DLC PVD Coatings with 1-Butyl-1-Methylpyrrolidinium tris(pentafluoroethyl)trifluorophosphate , 2010 .

[23]  C. Tomastik,et al.  Capacity of selected ionic liquids as alternative EP/AW additive , 2010 .

[24]  周峰,et al.  Imidazolium Ionic Liquids As Antiwear and Antioxidant Additive in Poly(ethylene glycol) for Steel/Steel Contacts , 2010 .

[25]  Jeremy J. Michalek,et al.  Structural Analysis of Vehicle Design Responses to Corporate Average Fuel Economy Policy , 2009 .

[26]  María-Dolores Bermúdez,et al.  Ionic Liquids as Advanced Lubricant Fluids , 2009, Molecules.

[27]  Ichiro Minami,et al.  Ionic Liquids in Tribology , 2009, Molecules.

[28]  Jun Qu,et al.  Ionic Liquids as Novel Lubricants and Additives for Diesel Engine Applications , 2009 .

[29]  M. Priest,et al.  Lubrication of an electroplated nickel matrix silicon carbide coated eutectic aluminium—silicon alloy automotive cylinder bore with an ionic liquid as a lubricant additive , 2009 .

[30]  Feng Zhou,et al.  Bisimidazolium ionic liquids as the high-performance antiwear additives in poly(ethylene glycol) for steel-steel contacts. , 2009, ACS applied materials & interfaces.

[31]  Jian Zhang,et al.  The tribological performance of BCN films under ionic liquids lubrication , 2009 .

[32]  M. Bermúdez,et al.  Imidazolium ionic liquids as additives of the synthetic ester propylene glycol dioleate in aluminium–steel lubrication , 2008 .

[33]  H. Kondo.  Protic Ionic Liquids with Ammonium Salts as Lubricants for Magnetic Thin Film Media , 2008 .

[34]  Tamar L Greaves,et al.  Protic ionic liquids: properties and applications. , 2008, Chemical reviews.

[35]  John J. Truhan,et al.  Ionic liquids with ammonium cations as lubricants or additives , 2006 .

[36]  F. J. Carrión,et al.  1-N-alkyl -3-methylimidazolium ionic liquids as neat lubricants and lubricant additives in steel–aluminium contacts , 2006 .

[37]  Wei-min Liu,et al.  Functional Room‐Temperature Ionic Liquids as Lubricants for an Aluminum‐on‐Steel System. , 2004 .

[38]  J. Zabinski,et al.  Ionic Liquid Lubrication Effects on Ceramics in a Water Environment , 2004 .

[39]  Peng Wang,et al.  Tribological Performance of Room-Temperature Ionic Liquids as Lubricant , 2002 .

[40]  Laigui Yu,et al.  Room-temperature ionic liquids: a novel versatile lubricant. , 2001, Chemical communications.

[41]  Ichiro Minami,et al.  Anti-wear and friction reducing additives composed of ortho-phenylene phosphate-amine salts for polyether type base stocks , 1998 .

[42]  V. Ivanov,et al.  Use of esters of acids of phosphorus as lubricity additives for high-temperature synthetic lubricating oils (a review) , 1976 .

[43]  E. S. Forbes,et al.  The effect of chemical structure on the load-carrying properties of amine phosphates , 1971 .