论文信息 - Sliding Mode Methods in Electric Vehicle Stability Control

Sliding Mode Methods in Electric Vehicle Stability Control

This work is dedicated to brake-based stability control system for electric vehicles. The aim of the research is to compare four control methods: first-order sliding mode (FOSM), second-order sliding mode (SOSM), integral sliding mode (ISM), and variable-structure PI (VSPI). For this purpose, an evaluation methodology based on the weighted control performance index (WCPI) was developed. The comparative analysis is conducted with an experimentally validated vehicle model in IPG CarMaker® and MATLAB/Simulink co-simulation environment including high-fidelity vehicle subsystems' models.

[1] I. Boiko,et al. Variable-structure PI controller for tank level process , 2008, 2008 American Control Conference.

[2] Halim Alwi,et al. Fault Tolerant Control Schemes Using Integral Sliding Modes , 2016 .

[3] Aldo Sorniotti,et al. Enhancing vehicle cornering limit through sideslip and yaw rate control , 2016 .

[4] Uwe Kiencke,et al. Detection of Critical Driving Situations using Phase Plane Method for Vehicle Lateral Dynamics Control by Rear Wheel Steering , 2008 .

[5] Antonella Ferrara,et al. Sliding mode control algorithms for wheel slip control of road vehicles , 2017, 2017 American Control Conference (ACC).

[6] Antonella Ferrara,et al. Integral Sliding Mode for the Torque-Vectoring Control of Fully Electric Vehicles: Theoretical Design and Experimental Assessment , 2015, IEEE Transactions on Vehicular Technology.

[7] Antonella Ferrara. Sliding Mode Control of Vehicle Dynamics , 2017 .

[8] Uwe Kiencke,et al. Automotive Control Systems , 2005 .

[9] Patrick Gruber,et al. Comparison of Feedback Control Techniques for Torque-Vectoring Control of Fully Electric Vehicles , 2014, IEEE Transactions on Vehicular Technology.