Effect of Reinforced Fiber Length on the Damping Performance of Thermoplastic Composites

Discontinuous fiber reinforced thermoplastic materials are being used in many engineering applications. To widen their structural and antivibration application, there is a need to understand damping performance and its associated mechanisms. In this work, unreinforced, 20% short glass fiber reinforced and 20% long glass fiber reinforced polypropylene (PP) materials have been considered. Test materials were subjected to deformation to identify energy absorbing mechanisms and to quantify damping. Test specimens were also subjected to free and forced vibration to quantify structural damping characteristics, namely, damping factor and phase lag between excitation force and material response. Unreinforced material exhibited higher damping performance than reinforced composite material. Short fiber reinforced PP exhibited superior damping behavior than long fiber reinforced PP due to its high fiber end density and weak fiber matrix interface.

[1]  J. Åberg,et al.  Uniaxial material damping measurements using a fiber optic lattice: a discussion of its performance envelope , 2004 .

[2]  Edoardo Mazza,et al.  A new method for measuring damping in flexural vibration of thin fibers , 2005 .

[3]  J. N. Ashton,et al.  An investigation of the influence of anisotropy and frequency on damping in short glass fibre reinforced polypropylene , 1990 .

[4]  Robiah Yunus,et al.  Effect of fiber length on thermomechanical properties of short carbon fiber reinforced polypropylene composites , 2009 .

[5]  G. Genta.  Vibration of structures and machines , 1993 .

[6]  J. N. Ashton,et al.  Measurement and theoretical modelling of the damping properties of a uni-directional glass/epoxy composite , 1996 .

[7]  S. Chaturvedi,et al.  The influence of fiber length and fiber orientation on damping and stiffness of polymer composite materials , 1986 .

[8]  B. Harris,et al.  Study of carbon fibre surface treatments by dynamic mechanical analysis , 1993 .

[9]  R. K. Mittal,et al.  Energy absorbing mechanisms in short-glass-fibre-reinforced polypropylene , 1990 .

[10]  Kshitij Gupta,et al.  Damping studies in fiber-reinforced composites : a review , 1999 .

[11]  J. Hancock,et al.  Interfacial slip and damping in fibre reinforced composites , 1978 .

[12]  Robert D. Adams,et al.  Damping in advanced polymer–matrix composites , 2003 .

[13]  Andrzej K. Bledzki,et al.  Possibilities to Improve the Properties of Natural Fiber Reinforced Plastics by Fiber Modification – Jute Polypropylene Composites – , 2000 .

[14]  M. Marchetti,et al.  Elasto-plastic behavior of thermoplastic composite laminates under cyclic loading , 1995 .

[15]  P. Steerenberg,et al.  Targeting pathophysiological rhythms: prednisone chronotherapy shows sustained efficacy in rheumatoid arthritis. , 2010, Annals of the rheumatic diseases.

[16]  I. B. Eryurek,et al.  Fatigue behavior of calcium carbonate filled polypropylene under high frequency loading , 2007 .

[17]  A. Castellani,et al.  Experimental Tests for Damping Measurements on Several Short Glass Fiber Composites , 1989 .

[18]  K. Menard.  Dynamic Mechanical Analysis: A Practical Introduction , 1997 .

[19]  W. Lorenzi,et al.  Mechanical Properties and Dynamic Mechanical Analysis of Thermoplastic-Natural Fiber/Glass Reinforced Composites , 2009 .

[20]  J. Thomason,et al.  The influence of fibre length and concentration on the properties of glass fibre reinforced polypropylene: 2. Thermal properties , 1996 .

[21]  In Lee,et al.  Dynamic characteristics of thermoplastic composite laminates , 1994 .