Gas sensing properties of hydrogen-terminated diamond

Abstract Hydrogen-terminated diamond (HD) samples possess a p-type surface conductivity (SC) which is caused by transfer doping to an adsorbed liquid electrolyte layer. We report on gas sensing experiments on such samples and show that these selectively respond to analyte gases that can undergo electrolytic dissociation in the surface electrolyte layer. These gas sensing interactions occur at room temperature and are far more selective than sensing interactions at heated metal oxide layers. Successive substitution of surface hydrogen atoms by oxygen atoms causes the sensor baseline resistance and the gas-induced resistance changes to increase. This latter observation suggests that a small number of O-termination sites may have a catalytic effect on the gas sensing interactions. Increased temperature, O 3 and UV light exposure all reduce the sensor recovery time constants. Heating beyond the water evaporation threshold (∼200 °C) causes the surface electrolyte layer to disappear and the gas sensing effect to vanish. Re-adsorption of the surface electrolyte layer re-establishes both the sensor baseline resistance and the gas sensing effect. A model for the dissociative gas response is proposed that accounts for the observed experimental facts.

[1]  K. Ihokura,et al.  The Stannic Oxide Gas SensorPrinciples and Applications , 1994 .

[2]  Anna Vilà,et al.  Analysis of the catalytic activity and electrical characteristics of different modified SnO2 layers for gas sensors , 2002 .

[3]  Yoshiyuki Sakaguchi,et al.  Hydrogenating Effect of Single-Crystal Diamond Surface , 1992 .

[4]  K. V. Ravi,et al.  Hydrogen passivation of electrically active defects in diamond , 1989 .

[5]  Giorgio Sberveglieri,et al.  Gas response times of nano-scale SnO2 gas sensors as determined by the moving gas outlet technique , 2007 .

[6]  Wolfgang Göpel,et al.  SnO2 sensors: current status and future prospects☆ , 1995 .

[7]  J. Goschnick,et al.  Gradient gas sensor microarrays for on-line process control — a new dynamic classification model for fast and reliable air quality assessment , 2000 .

[8]  T. Becker,et al.  Air pollution monitoring using tin-oxide-based microreactor systems , 2000 .

[9]  G. Swain,et al.  CVD diamond anisotropic film as electrode for electrochemical sensing , 2003 .

[10]  Elisabetta Comini,et al.  UV light activation of tin oxide thin films for NO2 sensing at low temperatures , 2001 .

[11]  P. Moseley,et al.  Solid state gas sensors , 1997 .

[12]  Yang Li,et al.  Fast response thin film SnO2 gas sensors operating at room temperature , 2006 .

[13]  N. Barsan,et al.  Fundamental and practical aspects in the design of nanoscaled SnO2 gas sensors: a status report , 1999 .

[14]  J W Gardner and P N Bartlett,et al.  Electronic Noses: Principles and Applications , 1999 .

[15]  Riedel,et al.  Origin of surface conductivity in diamond , 2000, Physical review letters.

[16]  G. Sberveglieri,et al.  Dissociative Gas Sensing at Metal Oxide Surfaces , 2007, IEEE Sensors Journal.

[17]  L. Ley,et al.  Electrochemical Surface Transfer Doping The Mechanism Behind the Surface Conductivity of Hydrogen-Terminated Diamond , 2004 .

[18]  D. Kohl.  Surface processes in the detection of reducing gases with SnO2-based devices , 1989 .

[19]  I. Eisele,et al.  Light enhanced NO2 gas sensing with tin oxide at room temperature: conductance and work function measurements , 2003 .

[20]  N. Bârsan,et al.  Conduction Model of Metal Oxide Gas Sensors , 2001 .

[21]  W. Beyer,et al.  Influence of adsorbates on the surface conductivity of chemical vapor deposition diamond , 2000 .

[22]  Koji Kajimura,et al.  Study of the effect of hydrogen on transport properties in chemical vapor deposited diamond films by Hall measurements , 1996 .

[23]  Hong-Ming Lin,et al.  UV enhancement of the gas sensing properties of nano-TiO2 , 2003 .

[24]  Shih-Chia Chang.  Oxygen chemisorption on tin oxide: Correlation between electrical conductivity and EPR measurements , 1980 .

[25]  Florian Maier,et al.  Electron affinity of plasma-hydrogenated and chemically oxidized diamond (100) surfaces , 2001 .

[26]  T. Doll,et al.  A rate equation approach to the gas sensitivity of thin film metal oxide materials , 2005 .

[27]  T. Doll.  Advanced Gas Sensing - The Electroadsorptive Effect and Related Techniques , 2003 .

[28]  Weng Poo Kang,et al.  Diamond microelectronic gas sensor for detection of benzene and toluene , 2004 .

[29]  Hiroshi Kawarada,et al.  Enhancement/Depletion Surface Channel Field Effect Transistors of Diamond and Their Logic Circuits , 1997 .

[30]  W. Kang,et al.  A New Hydrogen Sensor Using a Polycrystalline Diamond‐Based Schottky Diode , 1994 .

[31]  R. Cattrall.  Chemical Sensors , 1997 .

[32]  Shan Gao,et al.  Alcohols and acetone sensing properties of SnO2 thin films deposited by dip-coating , 2006 .

[33]  M. Stutzmann,et al.  pH sensors based on hydrogenated diamond surfaces , 2005 .

[34]  G. Sberveglieri,et al.  Gas Sensing Properties of Hydrogenated Amorphous Silicon Films , 2007, IEEE Sensors Journal.

[35]  Jingbiao Cui,et al.  DEHYDROGENATION AND THE SURFACE PHASE TRANSITION ON DIAMOND (111) : KINETICS AND ELECTRONIC STRUCTURE , 1999 .

[36]  H. V. Shurmer,et al.  The application of discrimination technique to alcohols and tobaccos using tin-oxide sensors , 1989 .

[37]  O. Weidemann,et al.  Gas Sensing Interactions at Hydrogenated Diamond Surfaces , 2007, IEEE Sensors Journal.