Energy Harvesting from Train-Induced Response in Bridges

The integration of large infrastructure with energy-harvesting systems is a growing field with potentially new and important applications. The possibility of energy harvesting from ambient vibratio ...

[1]  Ann Marie Sastry,et al.  Powering MEMS portable devices—a review of non-regenerative and regenerative power supply systems with special emphasis on piezoelectric energy harvesting systems , 2008 .

[2]  Adnan Harb,et al.  Energy harvesting: State-of-the-art , 2011 .

[3]  Aleksandra M. Vinogradov,et al.  Electro-mechanical properties of the piezoelectric polymer PVDF , 1999 .

[4]  S. Beeby,et al.  Energy harvesting vibration sources for microsystems applications , 2006 .

[5]  Carlos E. Ventura,et al.  Why Output Only Modal Analysis is a Desirable Tool for a Wide Range of Practical Applications , 2003 .

[6]  Rune Brincker,et al.  Vibration Based Inspection of Civil Engineering Structures , 1993 .

[7]  Jiangpeng Shu,et al.  The application of a damage detection method using Artificial Neural Network and train-induced vibrations on a simplified railway bridge model , 2013 .

[8]  F. Waldron,et al.  CMOS compatible low-frequency aluminium nitride MEMS piezoelectric energy harvesting device , 2013, Microtechnologies for the New Millennium.

[9]  Gangbing Song,et al.  Concrete structural health monitoring using embedded piezoceramic transducers , 2007 .

[10]  Ahmadreza Tabesh,et al.  A Low-Power Stand-Alone Adaptive Circuit for Harvesting Energy From a Piezoelectric Micropower Generator , 2010, IEEE Transactions on Industrial Electronics.

[11]  Alison B. Flatau,et al.  Review Paper: Health Monitoring of Civil Infrastructure , 2003 .

[12]  Mamoru TANAKA,et al.  Evaluation of advantages of high-speed EMUs in the case of series 700 Shinkansen high-speed train with IGBT applied traction systems , 2001 .

[13]  Lei Zuo,et al.  Enhanced vibration energy harvesting using dual-mass systems , 2011 .

[14]  Rune Brincker,et al.  An Overview of Operational Modal Analysis: Major Development and Issues , 2005 .

[15]  M. A. McCarthy,et al.  Progressive damage analysis of multi-bolt composite joints with variable bolt–hole clearances , 2005 .

[16]  Victor Giurgiutiu,et al.  Modeling and testing of PZT and PVDF piezoelectric wafer active sensors , 2006 .

[17]  Chan Ghee Koh,et al.  Output‐only structural identification in time domain: Numerical and experimental studies , 2008 .

[18]  Rosemary O'Keeffe,et al.  Practical wireless sensor networks power consumption metrics for building energy management applications , 2011 .

[19]  Eugene J. O'Brien,et al.  Effect of Vehicle Velocity on the Dynamic Amplification of a Vehicle Crossing a Simply Supported Bridge , 2006 .

[20]  Mustafa Gul,et al.  Damage assessment using flexibility and flexibility-based curvature for structural health monitoring , 2008 .

[21]  Nathan Jackson,et al.  Influence of aluminum nitride crystal orientation on MEMS energy harvesting device performance , 2013 .

[22]  Rune Brincker,et al.  Why Output-Only Modal Testing is a Desirable Tool for a Wide Range of Practical Applications , 2002 .

[23]  Alper Erturk,et al.  Piezoelectric energy harvesting for civil infrastructure system applications: Moving loads and surface strain fluctuations , 2011 .

[24]  Michael I. Friswell,et al.  Analysis of energy harvesters for highway bridges , 2011 .

[25]  Saibal Roy,et al.  Self-powered autonomous wireless sensor node using vibration energy harvesting , 2008 .

[26]  Vikram Pakrashi,et al.  Structural damage detection and calibration using a wavelet-kurtosis technique , 2007 .

[27]  Giorgio Monti,et al.  REINFORCED CONCRETE FIBER BEAM ELEMENT WITH BOND-SLIP , 2000 .

[28]  Biswajit Basu,et al.  A Bridge-Vehicle Interaction Based Experimental Investigation of Damage Evolution , 2010 .

[29]  Vikram Pakrashi,et al.  Monitoring and repair of an impact damaged prestressed bridge , 2013 .

[30]  Song-Yul Choe,et al.  Modeling and analysis of a bimorph piezoelectric cantilever beam for voltage generation , 2007 .

[31]  Nam Seo Goo,et al.  Identification of failure mechanisms in a smart composite actuator with a thin sandwiched PZT plate based on waveform and primary frequency analyses , 2007 .

[32]  J. Sirohi,et al.  Fundamental Understanding of Piezoelectric Strain Sensors , 1999, Smart Structures.

[33]  Eugene J. OBrien,et al.  The Effect of Vehicle Velocity on the Dynamic Amplification of Two Vehicles crossing a Simply Supported Bridge , 2017 .

[34]  Michael I. Friswell,et al.  Piezoelectric energy harvesting with parametric uncertainty , 2010 .

[35]  D. Inman,et al.  On Mechanical Modeling of Cantilevered Piezoelectric Vibration Energy Harvesters , 2008 .

[36]  Chi-Chang Lin,et al.  Vibration suppression for high-speed railway bridges using tuned mass dampers , 2003 .

[37]  P. Pillay,et al.  Self-Powered Sensors for Monitoring of Highway Bridges , 2009, IEEE Sensors Journal.

[38]  M. Langlois,et al.  Society of Photo-Optical Instrumentation Engineers , 2005 .

[39]  Raid Karoumi,et al.  Monitoring traffic loads and dynamic effects using an instrumented railway bridge , 2005 .

[40]  Shelley D Minteer,et al.  Self-powered sensors , 2011, Analytical and bioanalytical chemistry.

[41]  Roger Carter,et al.  4 – Computer software , 1993 .

[42]  Matthew J. Whelan,et al.  Wireless Monitoring of a Multispan Bridge Superstructure for Diagnostic Load Testing and System Identification , 2011, Comput. Aided Civ. Infrastructure Eng..

[43]  Henry A. Sodano,et al.  A review of power harvesting using piezoelectric materials (2003–2006) , 2007 .

[44]  Jason Dowling,et al.  Characteristic dynamic traffic load effects in bridges , 2009 .

[45]  Louis Lorieux.  Analysis of train ‐ induced vibrations on a single ‐ span composite bridge , 2008 .

[46]  Raid Karoumi,et al.  Twim: A MATLAB toolbox for real-time evaluation and monitoring of traffic loads on railway bridges , 2009 .

[47]  Gyuhae Park,et al.  Sensing Network Paradigms for Structural Health Monitoring , 2006 .

[48]  Eugene J. O'Brien,et al.  Using Weigh-in-Motion Data to Determine Aggressiveness of Traffic for Bridge Loading , 2013 .

[49]  D. Inman,et al.  A Review of Power Harvesting from Vibration using Piezoelectric Materials , 2004 .

[50]  Raid Karoumi,et al.  Implementing bridge weigh-in-motion for railway traffic , 2007 .

[51]  François M. Hemez,et al.  Uncertainty and Sensitivity Analysis of Damage Identification Results Obtained Using Finite Element Model Updating , 2009, Comput. Aided Civ. Infrastructure Eng..

[52]  K. Thoma,et al.  Spall experiments for the measurement of the tensile strength and fracture energy of concrete at high strain rates , 2006 .

[53]  Elias Siores,et al.  An investigation of energy harvesting from renewable sources with PVDF and PZT , 2011 .

[54]  Jerome P. Lynch,et al.  A summary review of wireless sensors and sensor networks for structural health monitoring , 2006 .

[55]  Michele Magno,et al.  Combination of hybrid energy harvesters with MEMS piezoelectric and nano-Watt radio wake up to extend lifetime of system for wireless sensor nodes , 2013, ARCS Workshops.

[56]  He Xia,et al.  Structural damage identification for railway bridges based on train-induced bridge responses and sensitivity analysis , 2011 .

[57]  D. H. Wang,et al.  Wireless Monitoring of Cable Tension of Cable-Stayed Bridges Using PVDF Piezoelectric Films , 2001 .

[58]  Dan Frangopol.  Output-Only Structural Identification , 2010 .

[59]  L Frýba,et al.  A rough assessment of railway bridges for high speed trains , 2001 .

[60]  Masayoshi Nakashima,et al.  Instability and complete failure of steel columns subjected to cyclic loading , 2005 .

[61]  T. Hsu,et al.  Cyclic Stress–Strain Curves of Concrete and Steel Bars in Membrane Elements , 2001 .