Stacking sequence and shape optimization of laminated composite plates via a level-set method

[1]  Qiao Xiang,et al.  SFP , 2018, Proceedings of the ACM SIGCOMM 2018 Conference on Posters and Demos.

[2]  Marcel Abendroth,et al.  Theory Of Plates , 2016 .

[3]  Erik Lund,et al.  Robust buckling optimization of laminated composite structures using discrete material optimization considering “worst” shape imperfections , 2015 .

[4]  Marco Montemurro,et al.  A multi-scale approach for the optimum design of sandwich plates with honeycomb core. Part II: the optimisation strategy , 2014 .

[5]  Marco Montemurro,et al.  A multi-scale approach for the optimum design of sandwich plates with honeycomb core. Part I: homogenisation of core properties , 2014 .

[6]  Erik Lund,et al.  DMTO – a method for Discrete Material and Thickness Optimization of laminated composite structures , 2014 .

[7]  José Pedro Albergaria Amaral Blasques,et al.  Multi-material topology optimization of laminated composite beams with eigenfrequency constraints , 2014 .

[8]  G. Allaire,et al.  MULTI-PHASE STRUCTURAL OPTIMIZATION VIA A LEVEL SET METHOD ∗, ∗∗ , 2014 .

[9]  Erik Lund,et al.  Topology and thickness optimization of laminated composites including manufacturing constraints , 2013 .

[10]  Frédéric Hecht,et al.  New development in freefem++ , 2012, J. Num. Math..

[11]  Daniel M. De Leon,et al.  Aeroelastic tailoring using fiber orientation and topology optimization , 2012 .

[12]  José Pedro Albergaria Amaral Blasques,et al.  Multi-material topology optimization of laminated composite beam cross sections , 2012 .

[13]  Nathalie Bartoli,et al.  Approximation of the critical buckling factor for composite panels , 2012 .

[14]  Marco Montemurro,et al.  A Two-Level Procedure for the Global Optimum Design of Composite Modular Structures—Application to the Design of an Aircraft Wing , 2012, J. Optim. Theory Appl..

[15]  Marco Montemurro,et al.  A Two-Level Procedure for the Global Optimum Design of Composite Modular Structures—Application to the Design of an Aircraft Wing , 2012, J. Optim. Theory Appl..

[16]  M. Bendsøe,et al.  Topology Optimization: "Theory, Methods, And Applications" , 2011 .

[17]  Mathias Stolpe,et al.  Generalized Benders’ Decomposition for topology optimization problems , 2011, J. Glob. Optim..

[18]  Erik Lund,et al.  Optimization strategies for discrete multi-material stiffness optimization , 2011 .

[19]  Osvaldo M. Querin,et al.  Bilevel Optimization of Blended Composite Wing Panels , 2011 .

[20]  Michaël Bruyneel,et al.  SFP—a new parameterization based on shape functions for optimal material selection: application to conventional composite plies , 2011 .

[21]  M. Zhou,et al.  Optimization of Composite: Recent Advances and Application , 2010 .

[22]  Erik Lund,et al.  Nonlinear Buckling Optimization of Composite Structures , 2010 .

[23]  Erik Lund,et al.  Discrete material optimization of vibrating laminated composite plates for minimum sound radiation , 2010 .

[24]  Raymond Hemmecke,et al.  Nonlinear Integer Programming , 2009, 50 Years of Integer Programming.

[25]  Erik Lund,et al.  Buckling topology optimization of laminated multi-material composite shell structures , 2009 .

[26]  David Bassir,et al.  Multiobjective stacking sequence optimization for laminated composite structures , 2009 .

[27]  Richard Butler,et al.  Optimization of composite stiffened panels subject to compression and lateral pressure using a bi-level approach , 2008 .

[28]  Zafer Gürdal,et al.  General Blending Definitions for Stacking Sequence Design of Composite Laminate Structures , 2008 .

[29]  Alban Carpentier.  Optimisation multi-niveaux de panneaux Composites , 2008 .

[30]  Paul M. Weaver,et al.  Lay-Up Optimization of Composite Stiffened Panels Using Linear Approximations in Lamination Space , 2008 .

[31]  Paul M. Weaver,et al.  Optimization of Long Anisotropic Laminated Fiber Composite Panels with T-Shaped Stiffeners , 2007 .

[32]  Layne T. Watson,et al.  Optimal design of composite wing structures with blended laminates , 2004 .

[33]  de Marc Schoenauer,et al.  Conception optimale de structures , 2007 .

[34]  Richard Butler,et al.  Bilevel Optimization and Postbuckling of Highly Strained Composite Stiffened Panels , 2006 .

[35]  Frédéric de Gournay,et al.  Velocity Extension for the Level-set Method and Multiple Eigenvalues in Shape Optimization , 2006, SIAM J. Control. Optim..

[36]  Fazil O. Sonmez,et al.  Optimum design of composite laminates for maximum buckling load capacity using simulated annealing , 2005 .

[37]  Erik Lund,et al.  Discrete material optimization of general composite shell structures , 2005 .

[38]  Layne T. Watson,et al.  Multidisciplinary Design Optimization with Quasiseparable Subsystems , 2005 .

[39]  Antoine Henrot,et al.  Variation et optimisation de formes , 2005 .

[40]  Christine M. Anderson-Cook,et al.  Genetic algorithm optimization and blending of composite laminates by locally reducing laminate thickness , 2004 .

[41]  G. Allaire,et al.  Structural optimization using sensitivity analysis and a level-set method , 2004 .

[42]  Ya-Jung Lee,et al.  Stacking sequence optimization of laminated composite structures using genetic algorithm with local improvement , 2004 .

[43]  Raphael T. Haftka,et al.  Single-level composite wing optimization based on flexural lamination parameters , 2004 .

[44]  Xiaoming Wang,et al.  A level set method for structural topology optimization , 2003 .

[45]  J. Sethian,et al.  FRONTS PROPAGATING WITH CURVATURE DEPENDENT SPEED: ALGORITHMS BASED ON HAMILTON-JACOB1 FORMULATIONS , 2003 .

[46]  Stephan Dempe,et al.  Foundations of Bilevel Programming , 2002 .

[47]  Layne T. Watson,et al.  Blending of composite panel designs using genetic algorithms , 2002, Proceedings 16th International Parallel and Distributed Processing Symposium.

[48]  Paolo Vannucci,et al.  A special class of uncoupled and quasi-homogeneous laminates , 2001 .

[49]  Christos Kassapoglou,et al.  Stacking Sequence Blending of Multiple Composite Laminates Using Genetic Algorithms , 2001 .

[50]  O. Pironneau,et al.  Applied Shape Optimization for Fluids , 2001 .

[51]  Layne T. Watson,et al.  COMPOSITE LAMINATE DESIGN OPTIMIZATION BY GENETIC ALGORITHM WITH GENERALIZED ELITIST SELECTION , 2001 .

[52]  Akira Todoroki,et al.  Permutation genetic algorithm for stacking sequence design of composite laminates , 2000 .

[53]  Alex M. Andrew,et al.  Level Set Methods and Fast Marching Methods: Evolving Interfaces in Computational Geometry, Fluid Mechanics, Computer Vision, and Materials Science (2nd edition) , 2000 .

[54]  F. Bloom,et al.  Handbook of Thin Plate Buckling and Postbuckling , 2000 .

[55]  Akira Todoroki,et al.  Stacking Sequence Optimizations Using GA with Zoomed Response Surface on Lamination Parameters. , 2000 .

[56]  Raphael T. Haftka,et al.  Design and optimization of laminated composite materials , 1999 .

[57]  J. Reddy.  Mechanics of laminated composite plates : theory and analysis , 1997 .

[58]  T Haftka Raphael,et al.  Multidisciplinary aerospace design optimization: survey of recent developments , 1996 .

[59]  Carlos Alberto Conceição António,et al.  Optimization of laminated composite structures using a bilevel strategy , 1995 .

[60]  Layne T. Watson,et al.  Improved Genetic Algorithm for the Design of Stiffened Composite Panels , 1994 .

[61]  Sven Leyffer,et al.  Solving mixed integer nonlinear programs by outer approximation , 1994, Math. Program..

[62]  Mitsunori Miki,et al.  Optimum Design of Laminated Composite Plates Using Lamination Parameters , 1993 .

[63]  R. Haftka,et al.  Optimization of laminate stacking sequence for buckling load maximization by genetic algorithm , 1993 .

[64]  G. Buttazzo,et al.  An optimal design problem with perimeter penalization , 1993 .

[65]  Raphael T. Haftka,et al.  Stacking sequence optimization of simply supported laminates with stability and strain constraints , 1992 .

[66]  Jan Sokolowski,et al.  Introduction to shape optimization , 1992 .

[67]  Raphael T. Haftka,et al.  Stacking-Sequence Optimization for Buckling of Laminated Plates by Integer Programming , 1991 .

[68]  Bernard Rousselet,et al.  Continuité et différentiabilité d'Éléments propres: Application à l'optimisation de structures , 1990 .

[69]  X. Yuan,et al.  Une méthode d'optimisation non linéaire en variables mixtes pour la conception de procédés , 1988 .

[70]  Manohar P. Kamat,et al.  OPTIMIZATION OF STIFFENED LAMINATED COMPOSITE PLATES WITH FREQUENCY CONSTRAINTS , 1987 .

[71]  Ignacio E. Grossmann,et al.  An outer-approximation algorithm for a class of mixed-integer nonlinear programs , 1987, Math. Program..

[72]  R. Haftka,et al.  Elements of Structural Optimization , 1984 .

[73]  W. Stroud.  OPTIMIZATION OF COMPOSITE STRUCTURES , 1983 .

[74]  P. G. Ciarlet,et al.  Les équations de Von Kármán , 1980 .

[75]  Raphael T. Haftka,et al.  Preliminary design of composite wings for buckling, strength and displacement constraints , 1978 .

[76]  A. F. Veinott,et al.  On the Convergence of Some Feasible Direction Algorithms for Nonlinear Programming , 1967 .