Multi-Objective Optimization of Gate Location and Processing Conditions in Injection Molding Using MOEAs: Experimental Assessment

The definition of the gate location in injection molding is one of the most important factors in achieving dimensionally accuracy of the parts. This paper presents an optimization methodology for addressing this problem based on a Multi-objective Evolutionary Algorithm (MOEA). The algorithm adopted here is named Reduced Pareto Set Genetic Algorithm (RPSGA) and was used to create a balanced filling pattern using weld line characterization. The optimization approach proposed in this paper is an integration of evolutionary algorithms with Computer-Aided Engineering (CAE) software (Autodesk Moldflow Plastics software). The performance of the proposed optimization methodology was illustrated with an example consisting in the injection of a rectangular part with a non-symmetrical hole. The numerical results were experimentally assessed. Physical meaning was obtained which guaranteed a successful process optimization.

[1]  H. H. Chiang,et al.  A unified simulation of the filling and postfilling stages in injection molding. Part II: Experimental verification , 1991 .

[2]  Yee Cheong Lam,et al.  Runner sizing and weld line positioning for plastics injection moulding with multiple gates , 2006, Engineering with Computers.

[3]  C. K. Au,et al.  Algorithms for Two Gate Optimization in Injection Molding , 2005 .

[4]  J. Viana,et al.  Using Multi-objective Evolutionary Algorithms for Optimization of the Cooling System in Polymer Injection Molding , 2012 .

[5]  Wen-Bin Young,et al.  Gate Location Optimization in Liquid Composite Molding Using Genetic Algorithms , 1994 .

[6]  Joshua D. Knowles,et al.  Multiobjective Optimization on a Budget of 250 Evaluations , 2005, EMO.

[7]  Ji-quan Li,et al.  Single gate optimization for plastic injection mold , 2007 .

[8]  Changyu Shen,et al.  Gate Location Optimization in Injection Molding By Using Modified Hill-Climbing Algorithm , 2004 .

[9]  B. Lee,et al.  Automated selection of gate location based on desired quality of injection-molded part , 1996 .

[10]  R. K. Ursem.  Multi-objective Optimization using Evolutionary Algorithms , 2009 .

[11]  Chun-Yin Wu,et al.  Injection molding optimization with weld line design constraint using distributed multi-population genetic algorithm , 2011 .

[12]  António Gaspar-Cunha,et al.  RPSGAe - Reduced Pareto Set Genetic Algorithm: Application to Polymer Extrusion , 2004, Metaheuristics for Multiobjective Optimisation.

[13]  C. A. Hieber,et al.  A unified simulation of the filling and postfilling stages in injection molding. Part I: Formulation , 1991 .

[14]  Douglas E. Smith,et al.  Analysis and sensitivity analysis for polymer injection and compression molding , 1998 .

[15]  Y. C. Lam,et al.  Optimization of gate location for plastic injection molding , 2001 .

[16]  António Gaspar-Cunha,et al.  Using Multiobjective Evolutionary Algorithms in the Optimization of Operating Conditions of Polymer Injection Molding , 2010 .

[17]  S. F. Shen,et al.  A finite-element/finite-difference simulation of the injection-molding filling process , 1980 .

[18]  Guy Courbebaisse,et al.  Shape analysis and injection molding optimization , 2002 .

[19]  I. O. Pandelidis,et al.  Optimization of injection molding design. Part I: Gate location optimization , 1990 .