Abstract The conditions at the wheel/rail contact have a dramatic impact on safety, ride quality and cost of maintenance. Appreciating its importance, the US Federal Railroad Administration (FRA) initiated a project to improve both the understanding of and application of an improved wheel/rail interaction on Amtrak's Northeast Corridor. One item delivered as part of this programme is an improved wheel profile. This profile is designed to reduce wheel flange wear for the Amtrak vehicles without introducing wheelset hunting. The comparative wear performance of the new wheel has been evaluated against existing wheels by simulating the wheel–rail interaction over 800 km of running. The simulation is based on the principle of pummelling and employs a quasi-static curving model. The model is validated through comparison with NUCARS predictions. The improved wheel design is found to exhibit a 25% reduction in flange wear compared with the current wheel profile.
[1]
Xuesong Jin,et al.
Wheel/rail adhesion and analysis by using full scale roller rig
,
2002
.
[2]
Pj Clark,et al.
Bogie curving trials, rail profiling and theoretical modelling to reduce rail deterioration and wheel wear on curves
,
1978
.
[3]
Sergey Zakharov,et al.
Wheel flange/rail head wear simulation
,
1998
.
[4]
Michael F. Ashby,et al.
Wear-rate transitions and their relationship to wear mechanisms
,
1987
.
[5]
A. H. Wickens.
Steering and Dynamic Stability of Railway Vehicles
,
1976
.
[6]
Klaus Knothe,et al.
Determination of the Tangential Stresses and the Wear for the Wheel-Rail Rolling Contact Problem
,
1985
.
[7]
P. Bolton,et al.
Rolling—sliding wear damage in rail and tyre steels
,
1984
.
[8]
J Kalousek,et al.
LATERAL CREEPAGE AND ITS EFFECT ON WEAR IN RAIL WHEEL INTERFACE
,
1982
.