Analysis of oxy-fuel combustion as an alternative to combustion with air in metal reheating furnaces

Using oxygen instead of air in a burning process is at present being widely discussed as an option to reduce CO2 emissions. One of the possibilities is to maintain the combustion reaction at the same energy release level as burning with air, which reduces fuel consumption and the emission rates of CO2. A thermal simulation was made for metal reheating furnaces, which operate at a temperature in the range of 1150–1250 °C, using natural gas with a 5% excess of oxygen, maintaining fixed values for pressure and combustion temperature. The theoretical results show that it is possible to reduce the consumption of fuel, and this reduction depends on the amount of heat that can be recovered during the air pre-heating process. The analysis was further conducted by considering the 2012 costs of natural gas and oxygen in Brazil. The use of oxygen showed to be economically viable for large furnaces that operate with conventional heat recovering systems (those that provide pre-heated air at temperatures near 400 °C).

[1]  B. M. Gibbs,et al.  Pulverized coal combustion in air and in O2/CO2 mixtures with NOx recycle , 2005 .

[2]  David R. Vinson,et al.  Air separation control technology , 2006, Comput. Chem. Eng..

[3]  Ruth Nataly Echevarria Huaman,et al.  Energy related CO2 emissions and the progress on CCS projects: A review , 2014 .

[4]  Filip Johnsson,et al.  Emission control of nitrogen oxides in the oxy-fuel process , 2009 .

[5]  Terry Wall,et al.  Combustion processes for carbon capture , 2007 .

[6]  Carlos A. Grande,et al.  Advances in Pressure Swing Adsorption for Gas Separation , 2012 .

[7]  Behdad Moghtaderi,et al.  Differences in reactivity of pulverised coal in air (O2/N2) and oxy-fuel (O2/CO2) conditions , 2009 .

[8]  Sanford Gordon,et al.  Computer program for calculation of complex chemical equilibrium compositions , 1972 .

[9]  Alexander Mitsos,et al.  A review of recent developments in carbon capture utilizing oxy‐fuel combustion in conventional and ion transport membrane systems , 2011 .

[10]  Pedro Teixeira Lacava,et al.  Thermal analysis of an enriched flame incinerator for aqueous residues , 2006 .

[11]  C. Zheng,et al.  Techno-economic evaluation of oxy-combustion coal-fired power plants , 2011 .

[12]  Eric Croiset,et al.  NOx and SO2 emissions from O2/CO2 recycle coal combustion , 2001 .

[13]  J. Zuwala,et al.  Oxy-fuel combustion of selected solid fuels under atmospheric and elevated pressures , 2013 .

[14]  A. Ghoniem,et al.  Analysis of oxy-fuel combustion power cycle utilizing a pressurized coal combustor , 2009 .

[15]  G. Riley,et al.  Comparison of effects on heat transfer and burnout under wet and dry recycle oxyfuel combustion conditions , 2011 .

[16]  Farid Chejne,et al.  Effect of flue gas recirculation during oxy-fuel combustion in a rotary cement kiln , 2014 .

[17]  Charles Baukal,et al.  Oxygen-Enhanced Combustion , 1998 .

[18]  Frank Kreith,et al.  CRC Handbook of Thermal Engineering , 1999 .

[19]  José Luz Silveira,et al.  Analysis of aluminum plates under heating in electrical and natural gas furnaces , 2000 .

[20]  A. Smith,et al.  A review of air separation technologies and their integration with energy conversion processes , 2001 .

[21]  M. Modest.  Radiative heat transfer , 1993 .

[22]  Wlodzimierz Blasiak,et al.  Flameless oxyfuel combustion for fuel consumption and nitrogen oxides emissions reductions and productivity increase , 2007 .