Experimental and thermodynamic analysis of MgO saturation in the CaO–SiO2–Al2O3–MgO slag system melted in a laboratory resistive furnace

[1]  H. L. Yang,et al.  Control of sulphur for spring steel killed by Si–Mn and with low basicity slag , 2018 .

[2]  Vinicius Cardoso da Rocha,et al.  Evaluation of Secondary Steelmaking Slags and Their Relation with Steel Cleanliness , 2017, Metallurgical and Materials Transactions B.

[3]  D. K. Egiazar’yan,et al.  Effect of Refining Slag Phase Composition on Ladle Furnace Unit Lining Life1 , 2016, Refractories and Industrial Ceramics.

[4]  S. Seetharaman,et al.  Optimization of Slag Chemistry Toward Inclusion Control for 28CrMo47 Drill Pipe Steel Based on Viscosity and Equilibration Studies , 2016 .

[5]  J. Xu,et al.  Effect of Al2O3 content on metallurgical characteristics of refining slag , 2016 .

[6]  S. Bragança,et al.  Free Opening Performance of Steel Ladle as a Function of Filler Sand Properties , 2016 .

[7]  X. Zhao,et al.  Effect of Top Slag with Low Basicity on Transformation Control of Inclusions in Spring Steel Deoxidized by Si and Mn , 2016 .

[8]  Li Pengcheng,et al.  Effects of MgO/Al2O3 Ratio and Basicity on the Viscosities of CaO-MgO-SiO2-Al2O3 Slags: Experiments and Modeling , 2016, Metallurgical and Materials Transactions B.

[9]  Jieyu Zhang,et al.  Experimental Investigation on Viscosity of CaO-MgO(-Al2O3)-SiO2 Slags and Solid-liquid Mixtures , 2015 .

[10]  S. Sridhar,et al.  MgO Solubility in Steelmaking Slags , 2015, Metallurgical and Materials Transactions B.

[11]  A. Vilela,et al.  Study of Inclusions in High Sulfur, Al‐Killed Ca‐Treated Steel via Experiments and Thermodynamic Calculations , 2015 .

[12]  A. Vilela,et al.  Efficiency of Inclusion Absorption by Slags during Secondary Refining of Steel , 2014 .

[13]  Y. Bao,et al.  Influence of slag composition on bearing steel cleanness , 2014 .

[14]  A. Luz,et al.  Slag conditioning effects on MgO–C refractory corrosion performance , 2013 .

[15]  Y. Pontikes,et al.  Effect of High Cooling Rates on the Mineralogy and Hydraulic Properties of Stainless Steel Slags , 2013, Metallurgical and Materials Transactions B.

[16]  P. Pistorius,et al.  Effect of Silicon on the Desulfurization of Al-Killed Steels: Part II. Experimental Results and Plant Trials , 2013, Metallurgical and Materials Transactions B.

[17]  M. Hayashi,et al.  Understanding the Properties of Slags , 2013 .

[18]  A. Silva.  Estimating Viscosities in Iron and Steelmaking Slags in the CaO-Al2O3-MgO-SiO2-(TiO2) System with Basis on a Thermodynamic Model , 2012 .

[19]  W. J. Wang,et al.  Study on refining slags targeting high cleanliness and lower melting temperature inclusions in Al killed steel , 2012 .

[20]  B. Yan,et al.  Experimental Determination of the Liquidus in the High-Basicity Region in the Al2O3(25 mass pct)-CaO-MgO-SiO2 and Al2O3(35 mass pct)-CaO-MgO-SiO2 Systems , 2011 .

[21]  J. Pötschke,et al.  MgO Saturation in Secondary Metallurgical Lime‐aluminate and Lime‐silicate Slags , 2011 .

[22]  D. Sichen,et al.  Viscosities of the Quaternary Al2O3‐CaO‐MgO‐SiO2 Slags , 2011 .

[23]  Y. Pontikes,et al.  Options to prevent dicalcium silicate-driven disintegration of stainless steel slags , 2010 .

[24]  J. Gran,et al.  Effects of slag composition and cooling rate on formation of glaze on MgO refractory , 2010 .

[25]  T. Pogue.  The South African Institute of Mining and Metallurgy RISE OF THE MACHINES-THE ' STATE OF THE ART ' IN MINING MECHANISATION , AUTOMATION , HYDRAULIC TRANSPORTATION AND COMMUNICATIONS , 2010 .

[26]  F. Engström,et al.  Characteristics of steel slag under different cooling conditions. , 2007, Waste management.

[27]  Kristina Beskow,et al.  Ladle glaze: major source of oxide inclusions during ladle treatment of steel , 2004 .

[28]  R. Fruehan.  UNIQUE FUNCTIONS OF SLAGS IN STEELMAKING , 2004 .